SIMJOY F10PRO Handheld 3 Axis Gimbal User Manual

SIMJOY F10PRO Handheld 3 Axis Gimbal

Product Usage Instructions

Connecting the Device
To connect the device, follow these steps:

1. Identify the appropriate input/output ports on your device.
2. Using the provided cables, connect the device to the corresponding ports on your device.
3. Ensure a secure connection is made between the device and your device.

Powering On/Off
To power on/off the device, use the following steps:

1. Locate the power button on the device.
2. To power on, press and hold the power button for a few seconds until the device powers on.
3. To power off, press and hold the power button again until the device powers off.

Adjusting Settings
The device allows you to adjust various settings to enhance your experience. Follow these steps to access and modify settings:

1. Press the menu button on the device to access the settings menu.
2. Use the navigation buttons to scroll through the available settings options.
3. Select a setting by pressing the enter/select button.
4. Use the navigation buttons to adjust the selected setting.
5. Press the enter/select button to confirm your changes.

Maintenance and Cleaning
To ensure optimal performance and longevity of the device, follow these maintenance and cleaning guidelines:

• Regularly clean the device using a soft, dry cloth to remove dust and debris.
• Avoid using harsh chemicals or abrasive materials that may damage the device’s surface.
• Keep the device away from excessive heat, moisture, and direct sunlight.
• Periodically check for any loose connections or cables and tighten or replace them as needed.

FAQ

Q: Can I use the device outdoors?
A: Yes, the device can be used in portable exposure conditions without restriction.

Q: What should I do if I encounter reception issues?
A: If you experience reception issues, try the following troubleshooting steps:

1. Ensure that the device is properly connected to your device.
2. Check for any obstructions or interference that may affect the signal.
3. Reposition the device to improve signal strength.
4. If the problem persists, consult the dealer or an experienced technician for further assistance.

Quick start

Quick start, install the smartphone and adjust balance (don’t power on)

1. Remove the smartphone case before installing, and put the smartphone on the phone holder and make the smartphone at the middle of holder.
2. Please put the smartphone 1n the phone holder, and keep the phone resists the motor as below picture shows, to avoid the vibration while using.
3. Loosen the balance knob, and adjust the balance arm until the smartphone in nearly balance condition.

Power On/Off

Power on
Press the power button until the indicator lights are on.

Power off
Press the power button until the indicator lights are off.

Connect to the bluetooth by native camera
Power on the gimbal, open the bluetooth on the phone, go into smartphone bluetooth setting page, choose the device name “GP5-xxxx” to connect.

Instruction for four modes

All Follow(AF): The Roll axis is locked, the Pan axis (left/right) and Tilt axis(up/down) will follow the movement of handle.

Half Follow(HF): Tilt & Roll axis are locked. Pan axis rotates (left/right) smoothly with the handle.

Lock Full(LF): Pan, Tilt, Roll axis are all locked. The camera remains still and stable, which means the camera cannot follow the movement of the handle.

First person view(FPV): Pan, Tilt, Roll axis follow the movement of the handle.

Phone Go
Long press the shutter button until the AF light is flashing, gimbal go to Phone Go mode, release the shutter button, gimbal will go out of Phone Go mode.

Get to know the gimbal

Switch between horizontal/vertical mode (Three switching ways)

Way 1: Press the power button three times

1. Put the gimbal as the below picture shows.
2. Press the power button three times, switch from horizontal mode to vertical mode.
3. Press the power button three times again, switch from vertical back to horizontal mode, or the gimbal will back to horizontal mode automatically when hold the gimbal upright;
   Reminder: FPV mode doesn’t support this operation.

Way 2: Gesture switch

1. Hold the gimbal perpendicular to the ground.
2. Tilt the gimbal left or right with 70°.
3. Gimbal will go to vertical mode automatically.
4. Gimbal will back to horizontal model automatically when holding the gimbal upright.
   Reminder: FPV mode doesn’ t support this operation.

Way 3: Rotate the smartphone clamp

1. Loosen the clamp knob.
2. Rotate the smartphone clamp with 90°.
3. Tighten the clamp knob.

Charging

About APP
This product supports native camera, can do basic stable shooting without APP with a native camera If you want to use more functions (such as panoramic, zoom, tracking and time-lapse), need download and use the app.

Download the Gimbal Pro APP
Scan the QR code or search “Gimbal pro” on the Google play or App store:

• Gimbal Pro requires iOS 12.0 system and later or Android 8.0 system and later.

Connect to Gimbal Pro APP

1. Go to setting page on smartphone.
2. Go to Bluetooth setting, find and click the device name “GP5 xxxx”.

Specification

Caution

1. Ensure the motor rotation is not blocked by external force during and after the stabilizer is powered on.
2. Please do not contact with sea water or corrosive liquid.
3. Please do not disassemble the stabilizer (except for the detachable accessories in the manual).
4. If the motor works continuously for a long time, the surface temperature of the motor may be too high.
5. It is strictly forbidden to drop or collide with the stabilizer, which may damage it and cause abnormal opera­tion.

Storage and maintenance

1. Please keep this product away from children and pets.
2. It is forbidden to put the product near the heat source (furnace or heater, etc.) and 1n the car at hot weather.
3. Please store the product in a dry environment.
4. Do not overcharge or discharge the battery, otherwise the battery cell will be damaged.
5. Do not use the product in the environment with too high or too low temperature.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>