ZVOX ZSK-B01 TV Soundbar Speaker User Manual

2.1 TV Soundbar Speaker
User Manuel
ZSK-B01

2.1 home audio spaker

ACCESSORIES LIST

SOUNDBAR CONTROLS

Control Panel

.

1. “   ”: Power Button
   Long press to power on / Hold for 3 seconds to power off.Short press to switch channels: ARC-OPT-USB-AUX-BT(Press to switch to Bluetooth channel and enter pairing mode. see led showing “BT”use mobile phone to
   searching:ZSK-B01 to connect device)

2. “ ”: Long press previous song/short press volume down.

3. “ ”:Long press to off “BT” short press to play/pause.

4. “ ”:Long press next song / short precs volume up.

Remote control

1. “ ”Power Button
   Press to power on / Short press to power on

2. “   ”Mute switch.

3. “ ” Volume Up

4. “ ” Play / Pause

5. “   ” Previous song

6. “ ” Next song

7. “ ” Volume Down

8. “ ” Press button to change mode BT/ARC/OPT/AUX/USB

9. “ ” Press BT unpaired

10. “ ” Press button music mode

11. “   ” Press button movies mode

12. “   ” Press button news mode

CONNECT TO SUBWOOFER

CONNECT TO TV VIA HDMI ARC

When your TV is connected to a stereo, ARC (HDMI) mode will automatically switch to this mode if the TV has its own recognition.If not, go to the TV and choose settings-sound-find ARC (HDMI) or OPT RCA AUX, remember that the stereo also needs to select the corresponding MODE in MODE ， in order to be the sound source normal access audio playback sound

CONNECT TO VIA OPTICAL/AUX

1. Make sure the TVs port is OPTICAL
   OUT,connect both sides of the cable to OPTICAL,for both the TV and the soundbar.

2. Make sure the optical plug is inserted correctly as it shows in the picture.Do notinsert the plug upside down and break the optical.

Note: If audio is playing from the internal TV speakers, mute or minimize the TV volume.

1. Connect the 3.5mm to 3.5mm Audio Cable to your TV’s AUDIO OUT port.
2. Not support AUDIO IN port on TV.
   Note: Please remember to unplug the AUX cable from TV and Soundbar when you want to switch to other mode.

In Optical Mode: If there is no sound, try setting the TV audio output to PCM: TV Setings > HomeSettings > Sound > Digtal Audio Output > PCN

CONNECT TO BLUETOOTH

1. Press the ” ” button on the soundbar or remote control to enter Bluetooth pairing mode.
2. Open your phone’s Bluetooth settings, find and select “ZSK-B01″ to connect the soundbar.Note: of it’s already in the Bluetooth mode and connected, press and hold ” ” buton for 3 seconds to disconnect the current device and connect to new device manually on your mobile phone / PC / TV.

WALL MOUNT INSTALLATION

SPECIFICATIONS

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: To reduce the risk of electric shock, do not openthe device, there is no party inside for the user. Refer all servicing to qualified personnel.
The lightning with the arrow symbol in the triangle is a warning sign alerting the user to dangerous voltage” inside” the unit.
The exclamation point in the triangle is a warning sign alerting the user of important instructions accompanying the product.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,DO NOT EXPOSE THIS APPLIANCE TORAIN OR MOISTURE.

IMPORTANT
-The use of apparatus in moderate climates.
-The marking plate is located on the bottom of unit.
– Make sure to have a minimum distance of 5 cm around the unit for sufficient ventilation.
– Ensure that the ventilation openings is not covered with items such as newspapers tablecloths.curtains. etc.
– Do not place naked flame sources, such as lighted candles on the apparatus.
– Do not expose this appliance to dripping or splashing water
– Do not place obiects filled with liquids, such as alass, vase on the device
If in the future, you need to get rid of this product, please note that Wasteelectrical products should not be disposed of with household wasteRecycling facilities exist.
Check with your municipality or ask your dealerfor advice. (Directive for Waste Electrical and Electronic Equipment)

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>