GRUNDIG GUVCD2800 Integrated Digital 26 cm TV User Guide
- June 17, 2024
- GRUNDIG
Table of Contents
GRUNDIG GUVCD2800 Integrated Digital 26 cm TV
Instalation Instruction
-
Install remote control batteries
-
Connect the aerial lead.
-
Plug in to the mains supply and switch on the mains socket.
Press the Power On/ Off button on the front of the TV.
-
Press any of the numeric buttons, P+ or P- to switch the TV on.
-
The message below will be displayed.
Press SELECT to start the search for digital TV channels.
The search progression will be displayed as shown below.
- Once the search for digital TV channels is complete the message below will be displayed. Press SELECT.
When the warning message is displayed press to highlight CONTINUE and press SELECT
- The search progression will be displayed as shown below.
Once the search is complete the PROGRAM list will be briefly displayed and the TV will tune to the first channel found.
- To switch between analogue and digital TV channels press the TV/DTV button.
Refer to the manual for detailed operating information.
Connection Diagram
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>