LAiYA 65X21 LED Mirror Full Length Light Instruction Manual
- June 17, 2024
- LAiYA
Table of Contents
LAiYA 65X21 LED Mirror Full Length Light
Rivet disassembly method
- Prepare an electric drill
- Align the electric drill with the rivet
- Knock out the rivets with an electric drill
- Remove the bracket to complete the demolition
Assembly Instructions
- Check the wall on which you want to hang the mirror to ensure it is a load-bearing wall so that it can support the weight of mirror.
- Measure distance between centers of two hooks (Flexible rule is recommended as the fool).
- Mark the centers of hooks on the wall: Measure the width and height of the wall you choose with flexible rule, and mark the location of two centers of hooks with a pencil.
- Drill at the marked place with prepared percussion drill whose broach is with a diameter of 6mm-8mm, and the holes drilled should be about 5cm deep.
- Knock expansion screws into the holes drilled with hammer.
- Screw screws into expansion screws with a screwdriver, and keep the top of screws 5mm away from the wall [A plier required to screw 7-shaped hooks)-
service email: service@laiyamirror.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>