IKEA SOLVINDEN LED Table Lamp Battery User Manual

June 17, 2024
Ikea

IKEA Logo SOLVINDEN LED Table Lamp Battery
User Manual

SOLVINDEN LED Table Lamp Battery

IKEA SOLVINDEN LED Table Lamp Battery SOLVINDEN

FOR INDOOR & OUTDOOR USE!

IMPORTANT SAFETY INSTRUCTIONS

Regularly check the cord, the transformer and all other parts for damage. If any part is damaged the product should not be used.
Important information! Keep these instructions for future use.

CAUTION!
The light source of this product is non-changeable light diodes (LED).
Do not disassemble the product, as the light diodes can cause damage to the eyes.
Do not immerse in water.
Cleaning
Use a damp cloth, never a strong cleaning agent.
WARNING
Deviation from the assembly instructions may result in a risk of fire or electric shock.

This device complies with part 15 of the FCC Rules.
Operation is subjected to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a  residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there  is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is  encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

READ AND FOLLOW ALL SAFETY INSTRUCTIONS
This decorative item is not intended for use by people (including children) whose physical, sensory or mental capabilities are different or reduced, or who lack experience or knowledge, unless they are otherwise supervised.
Children must be supervised to ensure that items are not used as toys.
CAUTION and mind the following. To reduce the risk of fire and electric shock:
– Disconnect decorative item from power source before performing any maintenance or cleaning activity.
– Do not place or hang near gas installations or electric heaters, fireplaces, candles, or other similar heating sources.
– Disconnect the item when leaving the house, going to bed, or if left unattended.
– Do not cover decorative item with fabric, paper or any material that is not part of the product when it is being used.
SAVE THESE INSTRUCTIONSIKEA SOLVINDEN LED Table Lamp Battery -
dfig

IKEA SOLVINDEN LED Table Lamp Battery - fig 1| IKEA SOLVINDEN LED Table Lamp Battery - fig2
---|---
IKEA SOLVINDEN LED Table Lamp Battery - fig3| IKEA SOLVINDEN LED Table Lamp Battery - fig4

Not to be incinerated.
Caution – Only replace batteries with IKEA LADDA type HR6 AA 1.2V 2450 mAh.
Disposal of used batteries should be in compliance with any local regulations.
Used with Class 2 listed power supply from IKEA with output 5Vdc, min. 1A.

IKEA SOLVINDEN LED Table Lamp Battery - fig5| IKEA SOLVINDEN LED Table Lamp Battery - fig6
---|---

IKEA Logo© Inter IKEA Systems B.V. 2023
2023-03-06
AA-2392948-2

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals