Aolon V52 Wireless Earphones User Manual

Aolon V52 Wireless Earphones

Headphone Pairing

1. The product defaults to automatic pairing and connection when you take out the earphones.
2. When you use it for the first time, you need to manually connect to the Bluetooth. If you have a connection record, it will automatically default back to the mobile phone.
3. Open the top cover of the charging compartment, take out the earphones, turn on the Bluetooth of the device, search for the Bluetooth pairing name “AOLON V52”, and click to connect.
4. The master and slave earphones can seamlessly and automatically switch between master and slave.

Code of Practice

• Power on: take off the earphone from the charging box, it will automatically power on, and the earphones will be paired automatically
• Shutdown: Put the earphones into the charging box and turn off the power, and the earphones will charge automatically
• Manually power on the headset: press and hold for 3 seconds
• Manual shutdown of the headset: press and hold for 5 seconds
• Pause/play/answer: L/R double tap
• Next song: Long press R for 1,5 seconds
• Previous song: Long press L for 1.5 seconds
• Voice assistant: L/R triple tap
• Refusal to listen: L. / R long press for 1.5 seconds
• LED indication status: (1 LED white light)
• Charging the earphones: the earphones are always on with a white light
• The headset is full: the headset does not light up
• Headphones are turned on: the white lights of the two headphones flash quickly
• After the earphones are paired: the white light of the main ear flashes slowly, and the light of the auxiliary ear turns off
• After connecting to the mobile phone: the headset does not light up
• Low battery: the white light flashes once every 5 seconds
• Pairing name: Aolon V52
• Prompt sound: Didi prompts for all operations (not in Chinese or English)

Product Specifications

• Product name: Wireless Earphones

• Model: AOLON V52

• BT version: B15.3

• BT receiving distance: 10 meters without obstacles in a straight line

• Waterproof level: IPX5

• Appearance material: ABS

• Charging bin charging current: 5V/300mA

• Headphone charging current: 5V/30mA

• Control method: touch

• RF carrier frequency: 2.4GISM band (2.402-2.480GHZ)

• Speaker size: speaker 32 ohms ‡ 15

• Speaker impedance: 32Q+15% at 1000Hz

• Speaker frequency response: 50HZ-20KHz
  Compatible system: IOS/ANDROID/WINDOWS

• Supported protocols: HFP A2DP AVRCP AVDTP GAP SDP

• Packing list: earphones, charging compartment, instruction manual, packing box, charging cable

Note
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>