JumBooking JX168 Smart Wireless Meat Thermometer Instruction Manual
- June 16, 2024
- JumBooking
Table of Contents
JumBooking JX168 Smart Wireless Meat Thermometer Instruction Manual
INSTALLATION INSTRUCTION
Please read this manual carefully before using and keep it properly for future reference (Please follow the important safety information (at the back of this page/ in the PROBER APP) to get the better user experience. For more information, please check “Settings-Help/Support” on the APP)
Step 1.
Charge the booster for 10-15 minutes. During charging, the LED light is
red, and it will tum Blue when fully charged.
Step 2
Scan the QR code on the back of the manual (or search for PROBER in the app
store) (iOS/Android).
Step 3. Launch the app
Step 4.
Press the push” button on the booster, and take out probe to activate the
product.
Step 5.
Click the “+” sign in the APP to pair the booster for the first time.
Step 6.
tart making the meat dishes you wa
PROBE INSERTION
ALWAYS INSERT INTO MEAT PAST THE SAFETY NOTCH TO AVOID DAMAGE
Click to enter the cooking interface, select the food to be cooked, set the target temperature and the preset temperature. Click on the settings in the upper right corner of the APP interface to select functions such as Fahrenheit/Celsius, language, sound, etc Click to start cooking. When the selected food reaches the target temperature, the APP will issue an alert or vibration to remind you that the food is ready.
PRODUCT FEATURES
CAUTION
Please Place the Booster Close to the Probe
App Store
https://apps.apple.com/us/app/prober/id6446616913 Google play
IMPORTANT SAFETY INFORMATION
- Warning 1.Do not have direct skin contact with the probe during or after cooking to avoid burns
- Close supervision is necessary if this is to be used near children. To prevent them from using this product as a toy.
- Do not immerse the charging base in water or other liquid. The probe is designed to be water resistant, not waterproof, it should not be submerged in water for a long time to avoid product damage.
- The use of accessories not recommended by the device manufacturer may cause danger or injury. 5.Do not place this product in a microwave oven, pressure cooker, or deep frying pan to avoid dange
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following
two conditions: (1) this device may not cause harmful interference, and (2)
this device
must accept any interference received, including interference that may cause
undesired
operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy
and, if not installed and used in accordance with the instructions, may cause
harmful
interference to radio communications. However. there is no guarantee that
interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception which
can be determined by turning the equipment off and on, the user is encouraged
to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
CARE AND MAINTENANCE
CARE 1.Clean before/after use.
2.Make sure the probes are completely dry and clean when placed back in the
charging dock/booster.
When place back the probe, you will hear a ticking sound, and the LED
indicator light will flash red three times to indicate that the probe is in
place.
When inserting the probe back into the base, please insert it in the
correct direction.
When not in use, please store the device in a cool, dry place.
WARRANTY
Operation must comply with the following two conditions:
- This device must not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit notexpressly approved by the party responsible forompliance could void the users’ authority to operate the equipment. This warranty is VOID if: a) the Product Safety instructions for proper usage of the Products are not followed; b) accidental damage occurred caused by the user or cooking apparatus; c) the prober was used commercially; or d) if prober has been tampered with.