IQUNIX OG80 Wireless Mechanical Keyboard Instruction Manual

June 16, 2024
IQUNIX

IQUNIX - logo 0680 SERIES
MECHANICAL KEYBOARDS

OG80 Wireless Mechanical Keyboard

We recommend that you read this manual thoroughly before using the product.
Start Reading→

LED Indicator Status Description

The indicator is located between and

Red Light
Blinking|
Blue Light
Blinking / Flashing|
Turquoise Light
Blinking / Flashing|
Yellow Light
Blinking / Flashing|
Pink Light
Blinking / Flashing|
White Light
On / Blinking
---|---|---|---|---|---
Low Battery
Level| Bluetooth Device #1
Re-Connecting
/ Pairing On| Bluetooth Device #2
Re-Connecting
/ Pairing On| Bluetooth Device #3
Re-Connecting
/ Pairing On| 2.4GHz Device
Re-Connecting
/ Pairing On| Caps Lock On & Off
/ Special Keys
Combination Enabled

Hold first then corresponding keys to enable special keys combination.
Short Press: Hold FN first, then the corresponding key, and release both keys.
Long Press: Hold FN first, then the corresponding key. Hold for 5 seconds until the indicator starts blinking.

Three Ways of Connecting Devices

Bluetooth Mode

  1. Toggle the keyboard Mode Switch to the wireless side.
  2. Short Press + to make the indicator blink in blue, then Long Press + to make the indicator flash in blue.
  3. Select the pairing device [IQUNIX OG80 BT 1]. The indicator turns off when the keyboard is paired successfully.

In order to complete the pairing of the keyboard with a second or third new Bluetooth device, repeat the instructions from Step 2 and replace the “FN+1” with “FN+2” or “FN+3”. The devices will be shown as [IQUNIX OG80 BT 2] and [IQUNIX OG80 BT 3].

2.4GHz Mode

  1. Toggle the keyboard Mode Switch to the wireless side.

  2. Plug the 2.4GHz receiver into your computer.
    IQUNIX OG80 Wireless Mechanical Keyboard - Three Ways of Connecting Devices
2

  3. Press +   to enter 2.4GHz pairing mode. The indicator turns off when the keyboard is paired successfully.

Wired Mode

  1. Toggle the keyboard Mode Switch to the wired side.
  2. Plug the USB cable into your device.
    IQUNIX OG80 Wireless Mechanical Keyboard - Three Ways of Connecting Devices
3

Please find the 2.4GHz receiver under the magnetic cover of OBSC (On-Board Storage Compartment).
Caution: The rated power for the charger must not exceed 5V 1A. Connection to a higher power output will damage the keyboard.

Special Keys Combinations

+

IQUNIX OG80 Wireless Mechanical Keyboard - Special Keys Combinations
1

Backlight Keys Combinations (Short Press)

+

IQUNIX OG80 Wireless Mechanical Keyboard - Backlight Keys Combinations
1

*Available for Backlit version only.

Keyboard Layout

IQUNIX OG80 Wireless Mechanical Keyboard - Keyboard Layout
1

Follow us: IQUNIX

To learn more details, please reach out to us on official website or social media.
Official website: www.IQUNIX.store

Series: OG80
Number of Keys: 83
Input: 5V 1A
Battery Specifications: 3.7V 4000mAh
Precautions: See Warranty Card
Manufacturer: Shenzhen Silver Storm Technology Co., Ltd.
A905, Rongchaobinhai Bldg., Haixiu Rd., Bao’an District, Shenzhen, China
Packing List: Keyboard, Dust Cover, USB Cable, 2.4GHz Receiver, Keycap & Switch Puller, Bluetooth Dongle, Manual, Warranty Card

https://manual-hub.com/

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals