IQUNIX OG80 Series: Wireless Mechanical Keyboard Instruction Manual
- June 9, 2024
- IQUNIX
Table of Contents
The IQUNIX OG80 Series Wormhole Wireless Mechanical Keyboard Instruction Manual provides users with comprehensive information on how to use this high- quality mechanical keyboard. This manual is designed to help users understand the various features of the IQUNIX OG80 Series keyboard, including LED indicator status descriptions, special keys combinations, and the three ways of connecting devices. The manual explains how to connect the keyboard through Bluetooth mode, 2.4GHz mode, and wired mode. It also provides users with safety precautions and information about the manufacturer and packing list. The IQUNIX OG80 Series keyboard is a high-performance mechanical keyboard that is designed to meet the needs of professionals and gamers alike. By reading this manual thoroughly, users can unlock the full potential of this keyboard and enjoy a seamless typing experience.
IQUNIX L80 Series Mechanical Keyboard
0G80 SERIES
MECHANICAL KEYBOARDS
We recommend that you read this manual thoroughly before using the product.
LED Indicator Status Description
-
Red Light Blinking
Low Battery Level -
Blue Light Blinking / Flashing
Bluetooth Device #1 Re-Connecting / Pairing On -
Turquoise Light Blinking / Flashing
Bluetooth Device #2 Re-Connecting / Pairing On -
Yellow Light Blinking / Flashing
Bluetooth Device #3 Re-Connecting / Pairing On -
Pink Light Blinking / Flashing
2.4GHz Device Re-Connecting / Pairing On -
White Light On/ Blinking
Caps Lock On & Off / Special Keys Combination Enabled
Hold first,
then corresponding keys to enable special keys combination.
Short Press: Hold FN first, then the corresponding key, and release both
keys.
Long Press: Hold FN first, then the corresponding key. Hold for 5 seconds
until the indicator starts blinking.
Three Ways of Connecting Devices
Bluetooth Mode
-
Toggle the keyboard Mode Switch to the wireless side.
-
Short Press + to make the indicator blink in blue,
then Long Press + to make the indicator flash in blue. -
Select the pairing device [IQUNIX L80 BT 1]. The indicator turns off when the keyboard is paired successfully.
In order to complete the pairing of the keyboard with a second or third new Bluetooth device, repeat the instructions from Step 8 and replace the “FN+1” with “FN+2” or “FN+3”. The devices will be shown as [IQUNIX L80 BT 2] and [IQUNIX L80 BT 3].
2.4GHz Mode
-
Toggle the keyboard Mode Switch to the wireless side.
-
Plug the 2.4GHz receiver into your computer.
-
(D Press + to enter 2.4GHz pairing mode. The indicator turns off when the keyboard is paired successfully.
Wired Mode
- Toggle the keyboard Mode Switch to the wired side.
- Plug the USB cable into your device.
*When being plugged into the computer, the keyboard will start to charge automatically.
*Caution: The rated power for the charger must not exceed 5V=1A.
Connection to a higher power output will damage the keyboard.
Special Keys Combinations
Backlight Keys Combinations (Short Press)
Keyboard Layout
Follow us: IQUNIX
To learn more details, please reach out to us on official website or social media. Official website: www.lQUNIX.store
- Series: LSD
- Number of Keys: 83
- Input: 5V=1A
- Battery Specifications: 3.7V 4000mAh
- Precautions: See Warranty Card
- Manufacturer: Shenzhen Silver Storm Technology Co., Ltd. A905, Rongchaobinhai Bldg., Haixiu Rd., Bao’an District, Shenzhen, China
- Packing List: Keyboard, Dust Cover, USB Cable, 2.4GHz Receiver, Keycap & Switch Puller, Bluetooth Dongle, Manual, Warranty Card
SPECIFICATION
Product Specification
|
Description
---|---
Series
|
OG80
Number of Keys
|
83
Input
|
5V=1A
Battery Specifications
|
3.7V 4000mAh
Precautions
|
See Warranty Card
Manufacturer
|
Shenzhen Silver Storm Technology Co., Ltd. A905, Rongchaobinhai Bldg., Haixiu Rd., Bao’an District, Shenzhen, China
Packing List
|
Keyboard, Dust Cover, USB Cable, 2.4GHz Receiver, Keycap & Switch Puller, Bluetooth Dongle, Manual, Warranty Card
FAQS
What is included in the packing list for the IQUNIX OG80 Series keyboard?
The packing list includes the keyboard, dust cover, USB cable, 2.4GHz receiver, keycap & switch puller, Bluetooth dongle, manual, and warranty card.
How do I connect the IQUNIX OG80 Series keyboard through wired mode?
To connect through wired mode, toggle the keyboard Mode Switch to the wired side. Plug the USB cable into your device. The keyboard will start to charge automatically.
How do I connect the IQUNIX OG80 Series keyboard through 2.4GHz mode?
To connect through 2.4GHz mode, toggle the keyboard Mode Switch to the wireless side. Plug the 2.4GHz receiver into your computer. Press “FN+D” to enter 2.4GHz pairing mode. The indicator turns off when the keyboard is paired successfully.
How do I connect the IQUNIX OG80 Series keyboard through Bluetooth mode?
To connect through Bluetooth mode, toggle the keyboard Mode Switch to the wireless side. Short press “FN+1” to make the indicator blink in blue, then long press “FN+1” to make the indicator flash in blue. Select the pairing device [IQUNIX L80 BT 1]. The indicator turns off when the keyboard is paired successfully. To pair with a second or third new Bluetooth device, repeat the instructions and replace “FN+1” with “FN+2” or “FN+3”. The devices will be shown as [IQUNIX L80 BT 2] and [IQUNIX L80 BT 3].
What are the three ways of connecting devices to the IQUNIX OG80 Series
keyboard?
The three ways of connecting devices are Bluetooth mode, 2.4GHz mode, and wired mode.
How do I enable special keys combinations on the IQUNIX OG80 Series
keyboard?
To enable special keys combinations, hold “FN” first, then the corresponding key. For short press, release both keys. For long press, hold for 5 seconds until the indicator starts blinking.
What are the LED indicator status descriptions for the IQUNIX OG80 Series
keyboard?
The LED indicator status descriptions are as follows: – Red Light Blinking: Low Battery Level – Blue Light Blinking / Flashing: Bluetooth Device #1 Re- Connecting / Pairing On – Turquoise Light Blinking / Flashing: Bluetooth Device #2 Re-Connecting / Pairing On – Yellow Light Blinking / Flashing: Bluetooth Device #3 Re-Connecting / Pairing On – Pink Light Blinking / Flashing: 2.4GHz Device Re-Connecting / Pairing On – White Light On/ Blinking: Caps Lock On & Off / Special Keys Combination Enabled
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>