K H 2120 Thermo Poultry Brooder Instruction Manual

May 15, 2024
K H

K H 2120 Thermo Poultry Brooder

Thermo-Poultry Brooder

Specifications

  • Product: Thermo-Poultry Brooder
  • Brand: K&H Farm EssentialsTM
  • Country of Origin: China
  • Manufacturer: K&H Pet Products, Central Garden & Pet Colorado Springs, CO
  • Website: www.khpet.com
  • Contact: (719) 591-6950
  • Features:
    • Convenient tilt option
    • 5’6 power cord
    • Simple to adjust heater height
    • Tool-free assembly
    • MET Listed

Product Usage Instructions

Important Safety Precautions

Before operating the Thermo-Poultry Brooder, please read and adhere to the following safety precautions:

  • Do not immerse the brooder, power cord, or appliance in water or any other liquid.
  • Keep the power cord out of the shelter.

Assembly

  1. Run the power cord through the center hole in one of the end braces. Refer to Figure 1.
  2. Choose the appropriate holes for the desired height of the
    heater panel. Align the connectors on the heater panel with the corresponding holes on the end braces. See Figure 2.

Figure 1: Cord placement and alignmentFigure 2: Adjusting the height of the heater panel

Brooding Chicks

The Thermo-Poultry Brooder is designed to provide a comfortable environment for small chicks. Follow the steps below:

  1. For small chicks, utilize the tilt option by positioning the front of the heater panel taller and leaning toward the back. This allows the baby chicks to stay towards the front or back, depending on the desired level of warmth.
  2. As your chicks grow, you can easily adjust the height of the heater panel by choosing the next set of adjustment holes.

Cleaning

To clean the Thermo-Poultry Brooder, follow these steps:

  1. Wipe down the brooder with a soap solution and a damp cloth.
  2. Thoroughly dry the brooder before using it again.

IMPORTANT FEATURES

The K&H Thermo-Poultry Brooder’s easy adjustable height, coupled with the special “tilt” option, make it the most chick-friendly brooder on the market.
For small chicks, utilize the tilt option so the front of the heater is taller and leans toward the back. The baby chicks will stay toward the front or back depending on the level of warmth desired.

INSTRUCTIONS

  • Run the cord through the center hole in one of the end braces. See Figure 1.
  • Choose the holes for the correct height of the heater panel. Line up the connectors on the heater panel with the holes on the end braces.
    braces. It’s that simple!
    NOTE: As your chicks grow, you can easily adjust the height of the heater panel by choosing the next set of adjustment holes.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be adhered to including the following:

  • Read all instructions.
  • To protect against electrical hazards, DO NOT immerse the cord, plug, or appliance in water or other liquid.
  • Close supervision is necessary when used by or near children.
  • ALWAYS unplug from the outlet when not in use.
  • DO NOT operate any electrical appliance with a damaged cord or plug, or if the appliance malfunctions or has been damaged in any way. RETURN all malfunctioning appliances to the factory for examination.
  • DO NOT use the appliance for anything other than its intended use.
  • DO NOT PUNCTURE HOUSING FOR ANY REASON.
  • For use with 110-120 volt AC ONLY.
  • Always make sure the cord exits your chick’s enclosure. Keep cord out of the shelter.

Cleaning
Your THERMO-POULTRY BROODER may be wiped down with a soap solution and a damp cloth. Thoroughly dry before using.

K&H Limited Two-Year Warranty

Our warranty is as follows: K&H Pet Products warrants to the original consumer, that this product will be free of defects and workmanship for a period of two years from the date of purchase. The manufacturer’s liability hereunder is limited to the replacement of the product. This warranty is void if the product has been damaged by accident, unreasonable use, neglect, tampering, or other causes not arising from defects in material and workmanship.

To exercise your warranty: If, during the warranty period, your product malfunctions, return it to the place of purchase with your original purchase receipt. If this cannot be done, return the product, postage prepaid, to K&H Pet Products, with a dated proof of purchase or original date receipt. A return authorization number can be obtained by calling (719) 591-6950 and must accompany all returns to the manufacturer. Please include a note explaining the problem when returning the product.

Thank you for purchasing a Thermo-Poultry Brooder by K&H Pet Products. When cared for properly, your brooder will provide years of hassle-free service. Features include a convenient “tilt” option, a 5’6” power cord, simple to adjust heater height, and tool-free assembly! MET Listed.

WARNING: This is an electrical product. Read all directions and precautions carefully before operating.

Failure to properly follow all directions and instructions may lead to electrical shock or fire, which could cause serious bodily injury.

FAQ

Q: Can I use the Thermo-Poultry Brooder for other types of poultry?

A: Yes, the Thermo-Poultry Brooder can be used for various types of poultry as long as they require similar brooding conditions.

Q: Is the Thermo-Poultry Brooder safe for use around children and pets?

A: The Thermo-Poultry Brooder should be placed in a secure location away from children and pets to prevent accidental contact with hot surfaces.

Q: Can the brooder be used outdoors?

A: The Thermo-Poultry Brooder is designed for indoor use only and should not be exposed to outdoor elements.

Q: How do I adjust the temperature of the brooder?

A: The Thermo-Poultry Brooder does not have a built-in temperature control. It provides a consistent level of warmth based on its design. If you need to adjust the temperature, you can raise or lower the brooder to provide more or less heat.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals