Trust TB-5300 Slimline Design Graphic Tablet User Manual
- June 16, 2024
- Trust
Table of Contents
Trust TB-5300 Slimline Design Graphic Tablet
Product information
- A: Tablet status LED
- B: Pre-programmed ‘Hot Cells’ (tap on these to execute commands or launch programs)
- C: Programmable ‘Hot Cells’
- D: Transparent overlay sheet
- E: Pen button 2
- F: Pen button 1
- G: Pen tip
Installation
- Place Trust installation CD in the CD-ROM drive.
- Install driver.
- Windows Vista and XP: Allow and execute all necessary actions.
- Follow setup instructions. Restart computer.
- connect USB. Wait until Windows completes installation automatically. In XP, on some systems, it may be needed to connect the tablet a second time for correct function.
- Place batteries as indicated.
Hotkey configuration
- Click on the tablet icon in the Windows taskbar.
- Windows Vista: click continue.
- Select the tablet PC feature ON/OFF. (Tablet PC mode supports ‘Pen Flicks’ in Vista)
- Click the Button Configuration Tab.
- Customize button actions
- Set the double-click speed
- Click the Scope Tab.
- Select the work area by preset:
- Full Area： Select the largest possible working area.
- Screen Ratio： Set the tablet area as same as the screen size by reducing either the current width or height of the Pen area.
- Reserve Edges: Allocate the space for the tablet’s hot cells.
- Manually adjust the work area by dragging the edges.
- Manually adjust the work area by setting the area dimensions and offset.
- Click the Hot Cells Tab.
- Enable/Disable Hot Cell edges.
- Select a Hot Cell by clicking on it.
- Click to define Hot Cell actions.
- Click the Run Tab and Browse for the program to launch or
- Click the Internet Tab Select action and type in the address or Click the Hoy Key Tab and Select a keyboard shortcut key.
- Click the Pressure Tab.
-
* Test Pen pressure by drawing in the white area.- Set pen tip click sensitivity.
Note
General usage
- Keep the tablet at least 15 cm away from a monitor, modem, and other electronic devices, because certain devices may emit electromagnetic interference.
- Use a transparent overlay for holding originals or menu templates in place while tracking.
- Replacing worn-out pen tip: (1) Pull out the used pen tip with the provided tool. (2) Insert new tip. (3) Press the pen firmly on a hard surface.
- Widescreen and dual monitor use is supported.
Software
- The driver on the CD may be a preliminary version. It’s recommended to download and install the latest driver.
- Always uninstall the old driver, unplug the Trust product, and restart the computer before installing of updated driver!
Energy
- Leave the Pen tip untouched while the Tablet is not in use. Do not put the pen in a cup or an office pen holder.
- The pen will enter power saving mode when it is not used for a while. Tap the pen tip to activate it again.
- Take the battery out if the tablet is not going to be used for a longer period.
- For the best pen performance, use 1.5V AAA Alkaline batteries.
- Never recharge the batteries provided and never throw them onto a fire.
- TObserve local regulations when disposing of batteries.
Frequently Asked Questions
How do I install the Trust TB-5300 Slimline Design Graphic Tablet on my computer?
To install the Trust TB-5300 Slimline Design Graphic Tablet, insert the Trust installation CD into your computer's CD-ROM drive, install the driver, and follow the setup instructions. After installation, connect the Trust TB-5300 Slimline Design Graphic Tablet via USB and wait for Windows to complete the installation process. You may need to connect the tablet a second time for proper function on some XP systems.
How can I configure the Trust TB-5300 tablet's hotkeys or buttons?
You can configure the Trust TB-5300 tablet's hotkeys or buttons by clicking on the tablet icon in the Windows taskbar. Then, follow the provided instructions to customize the button actions and set the double-click speed.
What is the recommended work area settings for the Trust TB-5300 tablet?
You can choose from various work area settings for the Trust TB-5300 tablet, including Full Area (largest working area), Screen Ratio (tablet area matching screen size), Reserve Edges (space for hot cells), or manually adjust the work area dimensions and offset as needed.
How do I enable or disable Hot Cell edges on the Trust TB-5300 tablet?
You can enable or disable Hot Cell edges on the Trust TB-5300 tablet by clicking on the Hot Cells Tab and selecting the desired Hot Cell. You can then define Hot Cell actions, such as launching programs or assigning keyboard shortcuts.
What should I do if I want to test the pen pressure sensitivity on the Trust TB-5300 tablet?
You can test the pen pressure sensitivity on the Trust TB-5300 tablet by clicking on the Pressure Tab and drawing in the white area. You can also adjust the pen tip click sensitivity in this section.
Are there any general usage recommendations for the Trust TB-5300 tablet?
It is advisable to keep the Trust TB-5300 tablet at least 15 cm away from monitors, modems, and other electronic devices to avoid electromagnetic interference. You can use a transparent overlay for holding originals or templates in place while working.
How can I replace a worn-out pen tip on the Trust TB-5300 tablet?
To replace a worn-out pen tip on the Trust TB-5300 tablet, use the provided tool to pull out the used tip, insert a new one, and press the pen firmly on a hard surface.
Does the Trust TB-5300 tablet support widescreen and dual monitor use?
Yes, the Trust TB-5300 tablet supports widescreen and dual monitor use.
Is it necessary to update the driver for the Trust TB-5300 tablet?
It is recommended to download and install the latest driver for optimal performance of the Trust TB-5300 Slimline Design Graphic Tablet. Always uninstall the old driver, unplug the tablet, and restart your computer before installing the updated driver.
How should I manage the power and batteries of the Trust TB-5300 tablet?
To save power, leave the pen tip untouched when the Trust TB-5300 tablet is not in use. If the tablet is not going to be used for an extended period, remove the battery. It's recommended to use 1.5V AAA Alkaline batteries and never recharge or dispose of them inappropriately.
What should I do with the batteries of the Trust TB-5300 tablet when they are no longer in use?
When disposing of batteries, be sure to observe local regulations for proper disposal methods and environmental compliance.
Can I use the Trust TB-5300 Slimline Design Graphic Tablet with Mac OS?
The Trust TB-5300 tablet's driver installation is primarily designed for Windows operating systems. However, some Mac users may be able to use it with third-party software or drivers. Be sure to check for Mac-compatible options if you intend to use it with a Mac.
Reference:Trust TB-5300 Slimline Design Graphic Tablet User Manual- device.report
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>