LG LNV7260R Dome Security Network Camera Owner’s Manual

OWNER’S MANUAL
Network Camera

Please read this manual carefully before operating your set and retain it for future reference.

MODELS LNV7260R
LNV5460R LNU7260R
LNU5460R 1610 (V1.0)

Introduction

The LG Network Camera is designed to use on an Ethernet network and must be assigned an IP address to make it accessible.
This manual contains instructions on how to install and manage the LG Network Camera in your networking environment. Some knowledge of networking environments would be beneficial to the reader.
Note that design and specification of this unit may change from the manual as quality and improvement without prior notice.
Should you require any technical assistance, please contact authorized service center.

Features Chart
This table shows the differences between the models.

Operation and settings

Before using the system

• LG IP device recommended to use in the closed network for network security.

• Before using the LG IP device make sure the connections are correct and verify whether proper power supply is used.

• Check the connections of the LG IP device for the correct conditions.

• Check that the LG IP device is(are) connected to the network and that power is supplied.

• Once the connections are made you need to install the LG client program to the PC from which you want to access the device.
  The LG Smart Web Viewer program is automatically installed when you connect the LG IP device.
  The LVi510 and the LG Smart Web Viewer program are the network program of the LG Video Server and the LG IP cameras.

• To view streaming video in Internet Explorer, set your browser to allow ActiveX controls. If you find this message “Click here to download the plug in, close all explorers during the installaion.”, Click the blue bar and install LG Smart Web Viewer Program on your computer. Please set your browser zoom level to 100 %.

• The Layouts and the Live view pages may differ with different OS (Operating Systems) and Web Browsers.

• Care needs to be taken not to run any other applications when the Client Program is running as it may cause memory shortage.

• When you set on 60 fps in mobile applications, may be degraded the frame rate depending on mobile performance.

Recommended PC Requirements
The LG IP device can be used with most standard operating systems and browsers.

Operating System

| Windows XP Professional, Windows 7 or above
CPU| Intel i7 or above
Web Browser| IE9 or above
DirectX| 10.X or above
Memory| 4 GB or above
Graphics Card| 512 MB or above
Hard Disk| 250 GB or above
Resolution| 1920 x 1280 or above

Note: For Windows 7, please download & install ‘DirectX End-User Runtime Web Installer’.
“http://www.microsoft.com/en- us/download/details.aspx?id=35”

Accessing the LG IP device
You can access the LG IP device by following the below steps.

1. Install LVi510 Program
   It recommended to use LVi510 surely.
   Otherwise, it is required to install the IP Utility [Package>Tools>LG IP Utility Installer] to search the IP addresses of LG IP devices.

2. Discover the LG IP device using the IP Utility
   The IP Utility can automatically discover and display LG IP devices on your network.
   The IP Utility shows the MAC address, IP address, Model name and so on.
   Note : The computer running the IP Utility must be on the same network segment (physical subnet) as the LG IP device.
   2.1 Run the IP Utility program.
   2.2 Click the [Search] button or select the [Search] option in the Device search menu.
   After a few seconds the found LG IP devices gets displayed in the IP Utility window.

3. Logging in to the LG Smart Web Viewer
   3.1 Runthe IP Utility and find the LG IP devices.
   3.2 When the LG IP devices appear in the IP Utility window, double-click IP address or right click on the same IP address and select “Connect to Web Page” to start the LG Smart Web Viewer. When accessing the LG Smart Web Viewer, the window for login will be shown. Select the language in dropdown list on right top of the window.3.3 Enter the user name and password. (Note that the default administrator user name and password are “admin”.)
   Note: Default password must be changed for security after initial connection.

Note:

• You can also access the LG Smart Web Viewer as shown below.
  3.1 Start your Web browser.
  3.2 Enter the IP address of the LG IP device in the address bar of the browse.
  3.3 Enter the user name and password set by the administrator.

• Check the browser cookies settings to use the [Remember my credentials].

• If LG Smart Web Viewer is required to be updated, it needs more time to display according to the network conditions.

• If you connect the LG Smart Web Viewer for the first time, the Security Warning window is displayed to install the LG Smart Web Viewer program. You must install the LG Smart Web Viewer program for using the LG IP device.

• If your computer or network is protected by a proxy or firewall, the proxy or firewall settings can prevent the LG Smart Web Viewer program. Change the proxy or firewall settings to activate the LG Smart Web Viewer program.

• Please use IE browser of windows and make sure the version above 9.0. Do not use any other browser except Firefox, Google.

LG Smart Web Viewer Overview

Live View

Note: You can set the stream configurations independently. This would facilitate the user to set the live view at user’s comfort.
| Previews the second stream video.
| Previews the third stream video.
| Fixed proportion of video images according to the resolution of the IPC.
Fit window| Displays video images to fit windows.
Local record| Click this button, video is recorded automatically. To stop the recording, click this button again during the recording. Default save path is:
D:\NetVideoBrowser\ RecordFiles
Snapshot| Click this button, current image is saved automatically to JPEG format on your computer. Default save path is: D:\NetVideoBrowser\ CapturePics
Talkback| Click this button to start intercom. To stop intercom, click this button again.
Open Audio| Adjust audio volume of the speaker on the computer. Click the speaker icon to switch the sound on or off.
---|---
Set mute| When you want to switch the sound off, click this speaker icon.
Full screen| **** Click this button to enter the full screen. Double click the screen or press [Esc] button of keyboard to quit.

System Settings

Note: This function only support camera with RS-485.
PTZ Control

It shows eight buttons to control the direction. Click button to enable auto scan function.

PTZ Position

1. Enter the preset number and click search button.
2. Select [Set] or [Call] on the preset position you want.

   [Set]Set the preset and add preset position. It is supported add multiple presets.
   [Call] Call the preset and make speed dome at preset position.

Stream Set

1. Click [Stream Set] and open parameter set interface.
2. Drag the adjustment bar to set a brightness, contrast, color saturation.
   Note :
   • Clik the [Default] button to turn to the default settings.
   • It needs restart after revise parameter.

Playback

Search recording files

1. Double click date in the calendar to search files.
2. Select [Record] or [Picture] in [FileType].
3. Check the [Remote] box to select record type.
4. Select targeted file type in [RecType].

Download recording files

Check targeted files to download.

• Click to download recording files.
• Click to download files into FTP server.
• Click to preview download status, and pause or delete when you need.

Note:
Download Management only support Local Download.

Playback

• Double click searched recording files for playback.
• Click to select local recording files.
• Click to play the playback. When you click , It will change into pause icon.
• Click   to fast move forwarder in speed of 2X, 4X, 6X and 8X.
• Click   to move forwarder slowly in speed of 1/2X,1/4X,1/6X and 1/8X.
• Click    to play frame by frame.
• Click to mute and click once again to cancel mute.
• Click to stop.

Recording snapshot

Click to capture the picture when playback the video.
Default storage path is D:\NetVideoBrowser\ PlaybackPics.

Video clip
Click to cut a clip of video when playback the video.
Click once to start and click again to finish.
Default storage path is D:\NetVideoBrowser\ PlaybackFiles.

Four screen play

Click to playback in 4 screen at the same time which can play separately for each screen. Once you select one screen and open the recording files you want.
Note:
Click to back to the single screen.

Full screen
Double click the screen or click button to enter full screen status.
To quit full screen mode, double click on screen or enter the [Esc].

Switch mode
Click to playback switch mode.

Log searching

Click [Log] to enter the page.

• Channel No. : Select channel which you want to search.
• Log Type : Select log type which of you want to search.
• Start Time : Select start date and time.
• End Time : Select end date and time.
• Query : Make a list of log at the presetting time.
• When there are many pages, you can click [First Page], [Pre Page], [Next Page], [Last Page] to check the log or [Jump To] the target page.
• Export Current Page: Click [Export Current Page] to export log of current page to your computer. It is saved in D:\NetVideoBrowser.
• Export All Page: Click [Export All Page] to export all the pages query to your computer. It is saved in D:\NetVideoBrowser.

Configuring the LG Network Camera Device

The features and options of the LG IP camera are configured through the [Configuration] menu.
Only administrator-level users have permission to access the [Configuration] menu.
Accessing the Configuration menu
Click the [Configuration] button to display the LG Smart Web Viewer configuration window.
Warning: The [Configuration] setup should be made by qualified service personnel or system installers.

Configuration

Configuration menu overview
The following table shows the list of menu items.
The configuration images are different from each model.

Audio Video Set

| Stream Set|
Audio Set|
Key Region|
Image Parameter|

Camera Set

| Image Set|
Schedule|
D/N Set|

VCA

| Alarm Info|
Create Rule|
VCA Schedule|
Advanced| For Technician

OSD

| OSD|
LOGO|
Privacy Mask|

Storage Management

| Record Policy|
Pre-Alarm Recording|
Storage Set|
Snapshot Set|
Disk Management|
Net Storage|

Network Management

| TCP/IP Set|
Registration Center|
Network Service|
IP Filter|
User Management| User Management|

Alarm

Management

| Alarm Input|
Alarm Output|
Motion Alarm|
Mask Alarm|
Email Alarm|
Alarm Server| Not support
PTZ Management| Serial Port Set| RS-485
 Advance Set| File Locations|
System Set|
System Maintenance|
Access Platform|

Audio video set
Stream Set
Select the stream you want.
General Set

• Str eam Type: Select the stream type.

• Resolution: Select the resolution.
  Note: Type of resolution is different according to stream type.

• Bit Rate: Input the bit rate value. It range from 32 to16,384 Kbps.

• Frame Rate: Select the frame rate.

• N/P Mode: Switch the N/P mode to [PAL] or [NTSC].
  Note: This mode is not supported on 3rd stream.

• Priority: Set a priority you want between [Quality] and [Frame Rate].
  Note: This mode is not supported on 3rd stream.

• Video Quality: Set a video quality you want. The [Better] and [Best] quality can streaming bandwidth working.
  Note: This mode is not supported on 3rd stream.

• I-Frame Interval: Set the interval time for each two I-frame.
  Note: This mode is not supported on 3rd stream.

• Encoding Mode: You can set a bit rate to constant or variable.
  Note: This mode is not supported on 3rd stream.

• Smooth Video Streaming: Adjust video streaming by moving adjustment bar from ‘clarity’ to ‘smooth’.
  Note: This mode is not supported on 3rd stream.

• Save: Save all the set up.

• Export: Click [Export] to do backup of the configuration file for all the parameter. Saves to D:\NetVideoBrowser\VideoParam.dat

• Import: Click [Import] to import the backup file for parameter configuration. Saves to D:\NetVideoBrowser\VideoParam.dat

Advanced Set
Note:
Type of resolution is different according to stream type.

• Corr idor Mode: Switch corridor mode to [ON] or [OFF].
  Note: Corridor mode is only supported on more than 720P resolution.

• Video Encoding: Select the video encoding type.

• Extended Code: Select the extended code.
  Note: Extended code can set on [H.264] type only.

• Channel Type: (This mode is not activated.)

• Encrypt Type: Set the encrypt type. It is supported [AES] encryption and default type is [Not Encrypted].

• Encrypt Password: Enter the password.

• Password Confirm: Enter the password once more.

• Electronic Image Stabilization: Switch the electronic image stabilization function to [Disable] or [Enable]. Default set is [Disable].

• SVC: Switch the SVC function to [Disable] or [Enable].

Default set is [Disable].

• Save: Save all the set up.
• Export: Click [Export] to do backup of the configuration file for all the parameter. Saves to D:\NetVideoBrowser\VideoParam.dat
• Import: Click [Import] to import the backup file for parameter configuration. Saves to D:\NetVideoBrowser\VideoParam.dat

Audio Set

• Audio Encoding: Select the audio encoding type.
• Audio Sample Rate: Select audio sample rate.
• Audio Control Type: Select audio control type. Active audio input select [LineIn], passive input select [MicIn].
• Volume Value: Adjust volume value by moving an adjustment bar.
• It range from 1 to 100.
• Audio Denoising: To delete the noise from voice, adjust audio denoising value by moving an adjustment bar.
• It range from 1 to 9.
• Save: Save all the set up.

Note:
It needs restart after revise parameter.

Key Region
To have better image quality for some regions on the video, there are 4 regions settable for each video.

• Str eam: Select the stream you want.
  Note: This mode is not supported on 3rd stream.

• Upgrade Level: Select upgrade level.

• Start to Draw: Click the [Start to Draw] button to draw the key region on the video by using a mouse.

• Line Clear: Click the [Line Clear] button to clear the lines.

• Delete Area: Click the [Delete Area] button to delete the drawn regions.

• Save: Save all the set up.

Image Parameter

• Image Parameter: Select the image parameter to adjust image.
• Save: Save the set up.

Camera set
Image Set
Set video image parameter in this page.

• Current Template: Choose the template that need to be modified.
  The system provides 8 video templates for different application, all the video parameter can only be revised and saved in the template.

• Template Name: Input template name.

Image Adjustment

• Adjust the brightness, contrast, saturation, hue and sharpness of image by moving a adjustment bar.

Exposure Set

• Shutter: Setup max exposure time by moving an adjustment bar.
  Note:

• If exposure time is too long, the image of moving objects will be slured, and if exposure time too short, the image color will be more black.

• Gain: Adjust max gain value that affect image brightness.
  Note:

• When gain value is too high, It will produce much noises.

• Brightness: Adjust the brightness of image by moving an adjustment bar.

• Auto Aperture: Set the auto aperture function to enable or disable.

• Auto Exposure Speed: Setup exposure speed by moving an adjustment bar.

Back Light set

• SmarIR: Switch the [Smart IR] function. This function is in IR camera, when image has over exposured, camera will turn down the brightness to avoid invisible object phenomenon according to over exposure.
• HLC: Set the HLC (High Light Control) function to enable or disable. It mainly used in transportation. When turn on the [HLC], highlight of car’s headlight will be suppressed.
• WDR: Select WDR mode.
  – Close: Disable WDR mode.
  – BackLight compensation: Set the apheliotropic area by clicking the checkbox.
  – WDR Auto: Setup the WDR function to automatically. Drag the slider of [Super-wide dynamic grade] to setup WDR level fit for environment.
  – WDR Manual: Set the WDR function to manually. Drag the slider of [Super-wide dynamic grade] to setup WDR level fit for environment.

White Balance

• White Balance: Select white balance mode according to the actual scene. If you select [Semi-auto] or [Handle], you can adjust red and blue balance to meet demand.
  (R is red gain, B is blue gain.)

Image Enhancement

• Image yle: Select image style.

• Indoor / Outdoor: Select indoor or outdoor mode.

• Defog: Set the defog function to enable or disable. If you select the [Enable], you can adjust [Defog] strength value by dragging slider.

• Digital Noise Reduction (DNR): Digital noise reduction
  – Close: Disable DNR mode.
  – Ordinary Mode: You can adjust [Denoise Level] by dragging slider.
  – Expert Mode: You can adjust [Space-Domain Denoise] and [Time-Domain Denoise] by dragging slider.
  Note:
  Please click [Save] after settings.

• Export: Click [Export] to export current HD parameter template to certain place (Default address is D:\NetVideoBrowser\HDPara.dat).
  This template can be used for other same model cameras.

• Import: Click [Import] to import HD parameter setting file from default address (Default address is D:\NetVideoBrowser\ HDPara.
  dat), to achieve quick configuration.

• Default: When you click the [Default], each template parameters will restored to factory default settings.

Schedule
User can setup the device to get best images in different time period. It provides maximum 8 time periods.
To setup schedule for each time periods, check the time line and select the image mode. To adjust templite time, drag the dividing line. Different color means different schedule.

• Expor t: Click [Export] export current image schedule to certain place  (default address D:\NetVideoBrowser\ HDSchedulePara.dat ), this template can be used for other same model cameras.
• Import: Click [Import] import image schedule file from default address(default address D:\NetVideoBrowser\ HDSchedulePara.dat), to achieve quick configuration.

D/N Set (Day and Night Setting)
Setup IP camera to switch in day and night with different rules.

• Realtime Brightness: Shows realtime brightness value of video.
• Color to B/W Type:
  – Auto(inside): Camera detects the video image automatically.
  Video will become color when brightness value higher than day value; Video will become gray when brightness value lower than night value.
  – B/W: Video is always in gray mode.
  – Color: Video is always in color mode.
  – Auto(outside): Device detects outside environment brightness with photoreceptor. Video will become color when outside brightness value higher day value; Video will become gray when outside brightness value lower than night value.
  (Only for IR camera)
  – Schedule: User can adjust the time of day and night.
  – Self-adaptive: In color mode, IPC will detect and analysis the brightnesss by internal synchronization sensor.
  When the brightness is lower than the setted night brightness ,the image will change into B/W in [B/W] mode.
  In color mode, IPC will detect and analysis the brightnesss by external synchronization Photoresistor. When the brightness is higher than the setted daylight brightness, the image will change into color.

VCA
Alarm Info

• Event: Select ‘All’ VCA events or other certain event.
• Rule ID: Select ‘All’ rule’s alarm information or other certain alarm information.
• Clear: Clear all alarm information from current list.
• Reset: Clear current alarm information and begin from one in next event.

Create Rule
When select [Create Rule] menu, prompt message will displayed (Tip: During the configuration, the VCA will be suspended!).
Confirm or cancel this message.

• Enable/Disable: Turn on or off current channel’s VCA function.

• Enable Arithmetic: ‘Behavior analysis’ and ‘Crowd Detection’ functions only can enable one in one time. Video and audio abnormal detection can work with upon analysis functions at same time.
  Note:
  ‘Behavior analysis’, ‘Video Detection’ and ‘audio abnormal detection’ need go into [Alarm Setup] to setup “enable time” and ”alarm trigger template” after [Save].

• Save: Save VCA settings.

[Behavior Analysis]-Event Set: [Tripwire]

• Enable Arithmetic: Behavior Analysis

• Rule ID: Select rule number.
  Note:

• Check the [Valid]. It draws one rule lines, the arrow of line means direction of prohibit crossing.

• Rule Name: Insert rule name.

• Event Set: Select [Tripwire].

• Percentage: Setup target size in the total screen (Area percent).

• Save: Save all the settings.

• Next: Go into [Alarm Setup] menu.

[Behavior Analysis]-Event Set: [Double Tripwire]

• Enable Arithmetic: Behavior Analysis

• Rule ID: Select rule number.
  Note:

• Check the [Valid]. It draws two rule lines. The arrow of line means direction of prohibit crossing, 2 lines direction should be the same, it will alarm when target object cross 2 lines continuously within the specified time.

• Rule Name: Insert rule name.

• Event Set: Select [Double Tripwire].

• Max time interval: Setup maximum time range of cross 2 lines continuously.

• Min time interval: Setup minimum time range of cross 2 lines continuously.

• Percentage: Setup target size in the total screen (Area percent).

• Save: Save all the settings.

• Next: Go into [Alarm Setup] menu.

[Behavior Analysis]-Event Set: [Perimeter]

• Enable Arithmetic: Behavior Analysis

• Rule ID: Select rule number.
  Note:

• Check the [Valid]. It draws one rule lines, the arrow of line means direction of prohibit crossing.

• Event Set: Select [Perimeter].

• Detect mode:
  – [Intrusion] mode: It will trigger alarm when object stay in detection area until reach [Invasion Time(s)].
  – [Enter] mode: It will trigger alarm when object go to detection area.
  – [Leave] mode: It will trigger alarm when object go out detection area.

• Invasion Time(s): Setup invasion time of object stay in detection area, it will trigger alarm when over the time.

• Percentage: Setup target size in the total screen (Area percent).

• Save: Save all the settings.

• Next: Go into [Alarm Setup] menu.

[Behavior Analysis]-Event Set: [Object Abandone]

• Enable Arithmetic: Behavior Analysis

• Rule ID: Select rule number.
  Note:

• Check the [Valid]. It draws two rule lines. The arrow of line means direction of prohibit crossing, 2 lines direction should be the same, it will alarm when target object cross 2 lines continuously within the specified time.

• Rule Name: Input a rule name.

• Event Set: Select [Object Abandone].

• Alarm Time: Setup alarm time of object stay in detection area, it will trigger alarm when over the time.

• Percentage: Setup target size in the total screen (Area percent).

• Save: Save all the settings.

• Next: Go into [Alarm Setup] menu.

[Behavior Analysis]-Event Set: [Missing Object Detection]

• Enable Arithmetic: Behavior Analysis

• Rule ID: Select rule number.
  Note:

• Check the [Valid]. It draws two rule lines. The arrow of line means direction of prohibit crossing, 2 lines direction should be the same, it will alarm when target object cross 2 lines continuously within the specified time.

• Rule Name: Input a rule name.

• Event Set: Select [Missing Object Detection].
  Note:

• Please notice the detection area shouldn’t overlap when [Object Abandone] and [Missing Object Detection] are enable at same time.

• Alarm Time: Setup alarm time of object lost in detection area, it will trigger alarm when over the time.

• Percentage: Setup target size in the total screen (Area percent).

• Save: Save all the settings.

• Next: Go into [Alarm Setup] menu.

[Behavior Analysis]-Event Set: [Loiter]

• Enable  Arithmetic: Behavior Analysis
• Rule ID: Select rule number.
• Note:
• Check the [Valid]. It draws one rule lines, the arrow of line means direction of prohibit crossing.
• Rule Name: Input a rule name.
• Event Set: Select [Loiter].
• Alarm Time: Setup alarm time of object stay in detection area, it will trigger alarm when over the time.
• Sensitivity: Adjust sensitivity value. As value increases, more  sensitive.
• Min Area: Adjust minimum area percentages. When the object’s motion area is equal or greater than this [Min Area], alarm function will activated.
• Save: Save all the settings.
• Next: Go into [Alarm Setup] menu.

[Behavior Analysis]-Event Set: [Running]

• Enable Arithmetic: Behavior Analysis

• Rule ID: Select rule number.
  Note:

• Check the [Valid]. It draws one rule lines, the arrow of line means direction of prohibit crossing.

• Rule Name: Input a rule name.

• Event Set: Select [Running].

• Minimum Area: Adjust minimum area percentages. When the object’s motion area is equal or greater than this [Minimum Area], alarm function will activated.

• Percentage: Setup target size in the total screen (Area percent).

• Save: Save all the settings.

• Next: Go into [Alarm Setup] menu.

[Behavior Analysis]-Event Set: [Parking]

• Enable Arithmetic: Behavior Analysis

• Rule ID: Select rule number.
  Note:

• Check the [Valid]. It draws one rule lines, the arrow of line means direction of prohibit crossing.

• Rule Name: Input a rule name.

• Event Set: Select [Parking].

• Alarm Time: Setup alarm time, alarm when the object keep parking to this alarm time.

• Percentage: Setup target size in the total screen (Area percent).

• Speed Threshold: Setup speed threshold value. When moving speed (percent / second) is slower than this [Speed Threshold], alarm function will activated.

• Save: Save all the settings.

• Next: Go into [Alarm Setup] menu.

[Crowd Detection]-Arithmetic: [Crowd Detection]

• Enable ithmetic: Select the [Crowd Detection].
• Save: Save the [Crowd Detection] setting.
• Arithmetic: Set the [Crowd Detection].
• Alarm Time(s): Set the time of linking to alarm.
• Percentage: Set the crowd percentage.
• Save: Save all the settings.
• Next: Go into [Alarm Setup] menu.

[Video Detection]-Arithmetic: [Video Detection]

• Enable Arithmetic: Select the [Video Detection].
• Save: Save the [Video Detection] setting.
• Arithmetic: Set the [Video Detection].
• Lens Diagnose: Check the [Lens Diagnose] to enable lens.
• Sceen Switch Diagnose: Check the [Sceen Switch Diagnose] to enable screen switch.
• Sensitivity: You can set the sensitivity value. Higher value means more sensitive.
• Save: Save all the settings.
• Next: Go into [Alarm Setup] menu.

[Audio Detection]-Arithmetic: [Audio Detection]

• Enable Arithmetic: Select the [Audio Detection].
• Save: Save the [Audio Detection] setting.
• Arithmetic: Set the [Audio Detection].
• Signal Loss Detection: Enable signal loss.
• Signal Abnormal Detection: Enable abnormal detection.
• Sensitivity: You can set the sensitivity value. Higher value means more sensitive.
• Save: Save all the settings.
• Next: Go into [Alarm Setup] menu.

VCA Schedule
Alarm Set

• Rule ID: Select the [Rule ID] to active the rule.

• Rule Name: Enter the rule name to active the rule.

• Event: Displays Rule ID information.

• Schedule: Set schedule date and time.

• Link Type: Select the link type.
  – Alarm Output
  – Link Rec
  – Link PTZ
  – Link Snap

• Output Port: Check the output port [All] or specific port number.

• Save: Save all the settings.

Advanced

Note:
[Advanced] is only available for company engineer to setup.

OSD
OSD
This function is used to add more information on the preview screen.

•  Camera Title: Check the [Camera Title] and input a channel name.
  – Customized Location: Select position of channel name on video image by mouse.
  – Color: Select OSD color.

• Date: Check the [Date] and select the date you want. There are 11 formats for option.
  – Customized Location: Select position of date which you selected on video image by mouse.
  – Color: Select OSD color.
  – Show Week: Check the [Show Week] to overlay week information on image.
  – 24 hours / 12 hours: Select time you want.

• Additional Text: Select additional text area number (max 5).
  Then input overlay contents. It supports English and common punctuation marks.
  – Customized Location: Select position on video image by mouse.
  – Color: Select OSD color.
  Note:
  You can not use special character in additional information (such as # % * \ ; ‘ “).

• OSD Size: Select suitable pixel size. Default size is [Self-adaptive].

• Fonts Type:
  – Vector / Lattice: Optional

• Save: Save all the settings.

LOGO
This function is used to overlay Logo picture on the preview screen.

• LOGO File
  – Browse: Browse files to find the logo.
  – Upload: Upload the logo file, IP camera will restart. After restart, please check [Enable] to display the logo.

• Customized Location: Select logo position on video image.
  Note:
  Logo format should be 24bit bmp and size should be less than 200*200. Height and width are divisible by 4 System. It will remove black and white picture of background automatically.

Privacy Mask
This function is used for setting hidden region on the preview screen to protect important information. It supports up to 4 regions.

• Draw the region on the screen by mouse. It supports up to 4 regions.
• Delete Region: Delete the drawn region.

Storage Management
Record Policy

• Record Status: Shows the device recording status.
  – Manual Rec: Enable to start recording and cancel to stop.
  – Alarm Rec: Enable to start recording when alarm is triggered.
  – Continuous: Enable to start timing recording.

• Schedule: Setup time period in [Continuous] mode.

• Offline Video Recording: On or off of the offline video recording function. When the internet is disconnected, it will start timing recording into camera SD card.

• Save: Save all the setup.

Pre-Alarm Recording
This function is used for pre-recording before alarm is triggered and extending recording time after alarm disappeared.

• Pre-Alarm Recording: Check
  [Pre-Alarm Recording] to enable tostart.

• Pre-alarm time (5-15)s: It is supported Support5s, 10s and 15s.

• Post-alarm time (10-60)s: It is supported 10s, 15, 30s and 60s.

• Save: Save all the setup.

Storage Set

• Free Disk Space(MB): Set the free disk space that custom you want to keep. It should be larger than 512MB.

• When HDD is full: When the free disk space reached the target size, system will run the following operation.
  – Stop Rec: It will stop recording.
  – Overwrite: It will delete the earliest record file.
  – Overwrite (Exclude Alarm Record Videos): It will delete the earliest record file except alarm.

• Save: Save all the setup.

Snapshot Set

• Timing Capture: Enable to start timing capture.

• Interval: Set timing capture interval time.

• Capture Link
  – Link FTP: Captured pictures will be uploaded to FTP server.
  – Link Email: Capture picture will be sent by email.

• Save: Save all the setup.

Disk Management

• Disk Information: Display the disk status.
• Initialize Disk: The new hard disk must be initialized first.

Net Storage

• Disk No.: Select one disk to setup.
• Status: Show the disk installation status. [UnMounted], [Unformatted], [Formated], [Mounted] and [Using] are optional.
• Usage: Show the disk usage status. [Record], [Backup], [Redundant] and [Read Only] are optional.
• IP Address: Set NFS server IP address.
• Mapping Path: Set the disk mapping path.
• Total Size: Display the free space and total size.
•  Save: Save all the setup.

Network Management

TCP/IP Set

• DHCP: Check the [DHCP] to enable DHCP server. It will automatically allocate IP address for devices.
• IPv4 Address / IPv6 Address: Displays IPV4, IPV6 address.
• IPv4 Subnet Mask / IPv6 Subnet Mask: Displays IPV4, IPv6 subnet mask.
• MAC: Displays Multi Access Computer.
• MTU: Maximum Transmission Unit. It range from 500 to 1500.
• Default value is 1500.
• Ethernet Rate(M): Select mode and rate of Ethernet card, speed unit is MB. Default mode is [Automatic Detection], modify not recommended.
• Note : Devices will restart after change [Ethernet Rate(M)] setting.
• Save: Save all the setup.

Registration Center

• Serer Name: Set the server name.
• IP adress1 / IP adress2: Set the IP addresses.
• Port1 / Port2: Set the ports.
• User Name: Enter the user name.
• Password: Enter the password.
• Save: Save all the setup.

Network Service
DDNS

• Enable: Check the [Enable] to enable DDNS.
• Server Domain: Modify sever domain.
• DDNS Domain: Modify DDNS domain.
• User Name: Enter the user name.
• Password: Enter the password.
• Password Confirm: Enter the password once more.
• Save: Save all the setup.

Note:
For using DDNS, user must register the domain to the DDNS server.
Registration process and instructions has guided in related site.

FTP

• Server URL: Enter the server URL.
• Port: Set the port.
• Path: Enter the path to download.
• User Name: Enter the user name.
• Password: Enter the password.
• Save: Save all the setup.

PPPoE

• Enable: Check the [Enable] to enable PPPoE function.
• User Name: Enter the user name.
• Password: Enter the password.
• Password Confirm: Enter the password once more.
• Save: Save all the setup.

NTP

• NTPServer: Enter the NTP server.
• Port: Set the port.
• Time Interval(minute): Set the interval.
• Save : Save all the setup.

MUC (Multicast)

• IPAddress: Enter the IP address.
• Port: Set the port.
• Save: Save all the setup.

Other

• UPnP Enable: Check the [UPnP Enable] box and restart the device to enable the UPnP function.
• SNMP Enable: Check the [SNMP Enable] box and restart the device to enable the SNMP function.
• HTTP Port: Enter the HTTP port, then restart device.
• HTTPS Port: Enter the HTTPS port, then restart device.
• RTSP Port: Enter the RTSP port, then restart device.
• Save: Save all the setup.

IP Filter
Blacklist and whitelist also named [IP filter], used to manage the access right of users.

• Setup IP filter.
  – Forbidden: Cancel all the blacklist and whitelist.
  – Blacklist: It used to block some IP address. Input the block IP address and click [Add], [Save]. Max to add 16 blacklist IP address.
  Note:
  Please don’t add your own IP address in blacklist, otherwise you will not be able to login.
  – Whitelist: Selects only some IP address allowed. Input trusted IP address and click [Add], [Save]. Max to add 16 whitelist IP address.
  Note:
  Once enable the whitelist function, please make sure to add your own IP address in whitelist, otherwise you will not be able to login the device.

• Add: Add block IP address or trusted IP address according to
  IP filter setting.

• Delete: Delete certain IP address. Select the left check box and click [Delete].
  • Save: Save all the set up.

Note:
The IP filtering can only recognize when the new user login, but not work for ready IP. It is strongly recommended that restart the equipment each time after configuring blacklist and whitelist.

User management

User management
Add user
Click [Add] button on [User Management] to add user.
Note:
Only the administrator can add and modify users.

• User Name: Input user name.

• Password: Input password.

• Password Confirm: Input password once more.
  Note:
  The user name and password can only input English letters and Numbers.

• Authority
  – Browse: Preview and Playback.
  – Browse + Control: Preview, Playback, Control PTZ and Log.
  – Browse + Control + set: Allow all operation except user authority.
  – Admin: All operations available.

• Add: Click [Add] to add user.

Modify password
Select a user you want to modify password in user list.

• Modify Pwd: Click [Modify Pwd] button on [User Management] to modify password.
• Old Pwd: Input the existing password.
• New pwd: Input the password to modify.
• Password Confirm: Input the modified password once more.
• Modify: Click this button to save settings.

Delete User
Select the user you want to delete in the user list.

• Delete: Click [Delete] button on [User Management] menu to delete user.

Alarm Management
Alarm Input

• Input port: Select [Input port] and check [Enable] box to valid the port alarm function. To close the alarm detection function, cancel it.

• Mode set: Switch the mode of function ON or OFF. It Included closed circuit alarm and open circuit alarm functions.
  – ON: Closes circuit alarm. It will alarm when disconnected circuit occurs short-circuit.
  – OFF: Opens circuit alarm. There was an alarm when the connected circuit disconnect.

•  Schedule: Set the date and time. It only alarms during the schedule.

• Link Type: Set an alarm activation.
  – Alarm Output
  – Link PTZ
  – Link Snap

• Save: Save all the set up.

• Copy to…: Copy to another output port.
  Note: The Alarm function only available for products which support Alarm In / Out.

Alarm Output

• Output Port: Select the output port.
• Mode Set: Select the mode set ON or OFF.
• Delay Time(s): Select the delay time.
• Save: Save all the set up.

Motion Alarm

• Checkthe [Enable] box to enable [Motion Alarm]. Then draw the area by dragging mouse left button. Click [Delete Region] to clean the draw area.

• Sensitivity: It range from 0 to 100. Small value means the higher sensitivity.

• Schedule: Set the date and time. It only alarm during the schedule.

• Link Type
  – Alarm Output
  – Activate Dual Light: It only used for the model which have double light. At night, motion detection link white light on.
  Under “Night Mode” (“White & Black” mode), IR LED on.
  Under “Day mode”(“Color” mode), IR LED off. Motion alarm disappear, double light off.
  Note: When white LED lights on by detecting motion, under the conditions of the camera videos are converted into black and white, determine night and day mode of video.
  Night mode: Maintains the B/W.
  Day mode: Maintains the Color.
  – Link Snap

• Save: Save all the set up.

Mask Alarm
When the video is covered, system will alarm according to the sensitivity setting.

• Check the “Enable” box to enable Video Occlusion Detection function.
• Sensitivity: Smaller number means more sensitive.
• Schedule: Video Occlusion Detection works only during this schedule time.
• Link Type: Set to achieve linking (such as link PTZ) after alarm is triggered.
• Save: Save all the set up.

Email Alarm
After this function is enabled, the alarm server will automatically send email to the setting email address when alarm is triggered.

• Check the ‘Email Alarm Enable’ box to enable this function.
• Email Server: Address format should be “smtp.xx.com”. XX Stand for email server such as “smtp.gmail.com”.
• Email Port: Default number is 25.
• Email Account: Enter the email account for sending email.
• Email Password: Enter the email password for the sending email.
• Email Mode: Select email mode. [login] is suggested.
• Encryption: Select encryption mode.
• Email Subject: Input the email subject.
• Email Address: Set the email address. It is for the receiving email.
• Save: Save all the set up.
• Test: Test email alarm function.

Alarm Server

• Alarm Server: Alarm server information can be customized.
  Input address.

• Port: Input port number.

• Save: Save all the set up.

PTZ Management
Serial Port Set
PTZ management includes [Serial Port Set] and [Protocol Set].
Note: After connecting the device that supported RS-485 communications to an IP camera, set the serial port to use the device.

Advance Set
File Locations

• Stream: Select the stream for a certain channel.
• Display frame and bit rate information: Check to display frame rate and bit stream on video.
• Browse: Click to choose save path of files.
• Play Performance: Set to achieve the balance between ‘fluency’ and ‘delay’.
• Protocol Type: Select the protocol type.
• Local Capture Format: Select the capture saving format.

System set

• System Information: Displays information of [CPU], [Memory] and [FLASH].
  Note:

• When you click the [Refresh] button, a display information value can be changed according to current conditions.

• Version Information: Displays version informations of the device.

• Language and Timezone: Set the time zone and time synchronous.
  – Daylight-Saving Time: Check to enable daylight saving time function.

• Save: Save all the set up.

System Maintenance

• Dvice Control
  – Factory Default
  – Reboot
  – Iris Correction
  – Lens Reset
  – Open remote service

• Firmware Upgrade: Upgrades new firmware (firmware format:
  .box/.bin). Upgrade process normally needs a few minutes until indication for completion. Please strictly follow the instruction by technical specialist for firmware upgrade.

• Configuration In/Out: Includes three types of specification:
  – Alarm: This specification includes alarm schedule and linkage info. VCA info is not included.
  – VCA: This specification includes schedule, rule and related setting.
  – System Set: This specification includes the other information except ‘Alarm’ and ‘VCA’ specification such as OSD, Recording strategy, Internet set and some other setting.

Access Platform

PU set

• User an set the IP address and port number of [Register Server], [Heartbeat Server], [Alarm Server] and VSP’s port number and VAP’s port number.
• [Channel No.] support [Auto Filling Set] function.
• Save: Save all the set up.

SIP Set

• User can set the [SIP set]
• [Channel No.] support [Auto Filling Set] function.
• Save: Save all the set up.

Platform Enabled

• Platform List: Enable or disable [onvif]. System will reboot automatically after setting.
  Note:
  Current platform must be disabled before changing into a new platform.

Reference

Troubleshooting
This section provides useful information to help you to resolve any difficulty you might have with your LG IP device.

which cause no recognition, need formatting for the disk.
Loose connection, re-plug USB / SD card and reboot the camera.
For portable disk, it may fail when there is not enough power, need to check the power supply method to make sure enough power supply or change to use independent power supply disk.

No recognition on Wireless Network Card

| Static turn the network card into protection state, need to reboot the camera.
Unstable condition on the network card, need to replace for new network card.
 Camera was power on but cannot be found on IP searcher.| Check status of computer / host NIC, NIC driver, network wire, and network connection, make sure all are correct.
Directly connect the camera to computer / host server to check it works or not, reset the computer / host server and try again.
Try another camera or another computer / host server
No image on IE| It needs to download and install the ActiveX plug-in for IE browsing at first connection.
 Displayed incorrect image after login| There is other device in the some network with same IP and Mac address.
Disconnect the camera, try to ping the network to check whether there is return package.
Use the IP searcher to check whether there are devices with same IP address, then disconnect the other devices to make sure the IP address of the camera is unique.
Public network connection, login and select the port that is mapping to other equipment’s port.
 It is ok to ping the server, but cannot properly login| Port 3001 is banned by the firewall.
Wrong port number or user ID or password is incorrect when logging in.
Too many access to the camera. Be set in prohibit list.
Use IP searcher to check the listen port of the camera, make sure it is the same as the software.
 UDP unable to connect video| Other client already connect to the camera on the same computer.
UDP port conflict with other application program on the same computer, revise camera IP address and test again.
 Video of two camera appear alternately, or connect and disconnect in sometime| Camera IP address conflict with other computer IP address
If conflict on MAC address, check on IP searcher.
If conflict on IP address, check on the IP searcher

**** Incorrect connection of video on IE

| Make sure host IP address is in the same network segment with the camera.
---|---
Make routing if in different network segment.
Make sure to use IE at version 9.0 or higher.
Make sure driver for graphic card and DirectX are installed properly, it is recommended to install the latest version driver.
Make to enable ActiveX plug-in.
Turn off Anti-virus software and firewall to test.
Delete the installed plug-in, download again and re-install to test.
Use another computer / host server to test.
Contact service center if still had problem.
Cannot connect sub-stream| Access to camera are full.
Control Failure| It is able to control Pan / Tilt / Zoom in IE, but cannot control in the software.
Make sure the control protocol is correct.
Make sure address for PTZ camera is correct set in software.
Video display properly in the software, but it is unstable or intermittent or lose frame| Exit the software, check the CPU utilization of the computer, make sure the computer configuration is capable to run the software and there is no virus.
Ping the camera from the computer to check whether there is dropout.
Test network bandwidth, if it is not enough or unstable, please contact the Internet Service Provider.
Please lower down the resolution or image quality when need fluent video in narrow network bandwidth.
Please check if it open VCA functions, please close VCA function, then try again.
Connection is correct but screen is black or video image is anamorphic| DirectX version lower than 9.0. Check the DirectX version.
Graphic card driver incorrect, which disable the accessory function of DirectX; set full screen privacy mask.

**** Video display properly in IE but abnormal in software

| Please make sure software version is correct.
Make sure IP address and server type is correct in software. It is suggested to use “Main stream + TCP” type in LAN, and “Sub-stream +TCP” in WLAN.
Make sure video are all connected in the software main interface.
Reboot the software to connect again.
Video display and control properly but no audio| Make sure the computer audio card driver connection is correct, please try to play some music to test.
Make sure to selected Video / Audio not only Video in camera setting.
Make sure the audio channel is correct.
Make sure the microphone is connected properly.
Weak Audio Signal| Make sure using active microphone.
---|---
Increase the sensitivity of the microphone.
Use active loudspeaker for audio playing.
No Alarm Output| Make sure output wiring is correct.
Make sure power input voltage; AC 24 V / DC 12 V, electricity; 2A
Check the setting for input / output port in IE.
Make sure the alarm device is working properly.
Suddenly loses power after setup the parameter| Parameter is set to save properly after 1 minute, unless reset the camera automatically.
**** USB become smaller after used in camera| USB and the SD card were formatted by the special division operation on the camera, the result in part of capacity on the computer can not be identified.
Reformat USB or SD card by BOOTICE.EXE software on the PC.

Open Source Software Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.

Specifications

**** Camera

| Image Device| 1 / 2.8” Exmor CMOS
Lens Type| 3.3 – 10 mm, Motorized Lens
Day / Night| Dual ICR

Minimum Illumination

| Color: 0.03 lux @ F1.4 (AGC ON)
B/W: 0 lux @ IR LED on
IR Distance| 30 m
Image Enhancement| Configurable Brightness, Saturation, Contrast, Flip Mode, HLC, Smart Defog, Corridor, EIS
** Video / Audio| Compression| H.265, H.264 HP / MP / BP, M-JPEG
Resolution| 60 Hz: 1080p @ 30 fps, 960p @ 30 fps, 720p @ 60 fps
50 Hz:** 1080p @ 25 fps, 960p @ 25 fps, 720p @ 50 fps
Maximum Frame Rate| 60 fps @1280 × 720
Multi-Streaming| Up to 3
ROI (Smart-Codec)| Support (Up to 4 zones)
Video Analytics| Tripwire, Perimeter, Missing Foreign object, Crowd, Loitering, Fast Moving, Parking, Audio Offline
Text Overlay| Support
Audio Compression| G.711, G.726, ADPCM, AAC
2-way Audio| Support
Audio Detection| Support

Event

| Event Trigger| Motion Detection, IP Conflict, Port Alarm
Event Notification| Relay Out, Email, FTP
Pre-Alarm Recoding| Support

Interface

| Analog Out| 1 BNC Out
Audio In / Out| 1 In / 1 Out
Alarm In / Out| 2 In / 1 Out
SD Slot| Micro SD (Up to 128 GB)
RS-485| Support
Network| Ethernet| RJ-45 10, 100 BASE-T
Security| Password protection, IP filter
Open Protocol| ONVIF (Profile S)
Protocol| IPv4/IPv6, HTTP, 802.1x, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, TCP, UDP, DHCP, PPPoE
Integrated Software| Mobile application (iPhone, iPad, Android)
Connections| Up to 4 Level, 8 Users
General| Power Source| DC 12 V, AC 24 V, PoE
Maximum Power Consumption| 12.5 W
Maximum Input Current| 890 mA (AC 24 V), 980 mA (DC 12 V), 260 mA (PoE)
Operation Temperature / Humidity| -30 ˚C to 60 ˚C / 0 % RH to 95 % RH
Protection| IK10, IP66
Dimension (W x H x D)| 97.1 mm × 89.4 mm × 311.8 mm
Weight| 1.3 kg
**** Camera| Image Device| 1 / 3” CMOS
---|---|---
Lens Type| 3.3 – 10 mm, Motorized Lens
Day / Night| Dual ICR

Minimum Illumination

| Color: 0.5 lux @ F1.4 (AGC on)
B/W: 0 lux @ IR LED on
IR Distance| 30 m
Image Enhancement| Configurable Brightness, Saturation, Contrast, Flip Mode, HLC, Smart Defog, Corridor, EIS

**** Video / Audio

| Compression| H.265, H.264 HP / MP / BP, M-JPEG
** Resolution| 60 Hz: 1440p @ 25fps, QXGA @ 25fps, 1080p @ 30fps, 960p @ 30fps, 720p @ 30fps
50 Hz:** 1440p @ 25fps, QXGA @ 25fps , 1080p @ 25fps, 960p @ 25fps, 720p @ 25fps
Maximum Frame Rate| 30fps @ 1920 × 1080, 60fps @ 1280 × 720
Multi-Streaming| Up to 3
ROI (Smart-Codec)| Support (Up to 4 zones)
Video Analytics| Tripwire, Perimeter, Missing&Foreign object, Crowd, Loitering, Fast Moving, Parking, Audio Offline
Text Overlay| Support
Audio Compression| G.711A, G.711U, ADPCM, AAC
2-way Audio| Support
Audio Detection| Support

Event

| Event Trigger| Motion Detection, IP Conflict, Port Alarm
Event Notification| Relay Out, Email, FTP
Pre-Alarm Recoding| Support
**** Interface| Analog Out| 1 BNC Out
Audio In / Out| 1 In / 1 Out
Alarm In / Out| 2 In / 1 Out
SD Slot| Micro SD (Up to 128 GB)
RS-485| Support
**** Network| Ethernet| RJ-45 10, 100 BASE-T
Security| Password protection, IP filter
Open Protocol| ONVIF (Profile S)
Protocol| IPv4 / IPv6, HTTP, 802.1x, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, TCP, UDP, DHCP, PPPoE
Integrated Software| Mobile application (iPhone, iPad, Android)
Connections| Up to 4 Level, 8 Users
General| Power Source| DC 12 V, AC 24 V, PoE
Maximum Power Consumption| 12.5 W
Maximum Input Current| 890 mA (AC 24 V), 980 mA (DC 12 V), 260 mA (PoE)
Operation Temperature / Humidity| -30 ˚C to 60 ˚C / 0 % RH to 95 % RH
Protection| IK10, IP66
Dimension (W x H x D)| 97.1 mm × 89.4 mm × 311.8 mm
Weight| 1.3 kg
Camera| Image Device| 1 / 2.8” Exmor CMOS
---|---|---
Lens Type| 3.3 – 10mm, Motorized Lens
Day / Night| Dual ICR

Minimum Illumination

| Color: 0.03 lux @ F1.4 (AGC ON)
B/W: 0 lux @ IR LED on
IR Distance| 30 m
Image Enhancement| Configurable Brightness, Saturation, Contrast, Flip Mode, HLC, Smart Defog, Corridor, EIS

**** Video / Audio

| Compression| H.265, H.264 HP / MP / BP, M-JPEG
Resolution| 60 Hz: 1080p @ 30fps, 960p @ 30fps, 720p @ 60fps

50 Hz: 1080p @ 25fps, 960p @ 25fps, 720p @ 50fps

Maximum Frame Rate| 30 fps @ 1920 × 1080, 60 fps @ 1280 × 720
Multi-Streaming| Up to 3
ROI (Smart-Codec)| Support (Up to 4 zones)
Video Analytics| Tripwire, Perimeter, Missing&Foreign object, Crowd, Loitering, Fast Moving, Parking, Audio Offline
Text Overlay| Support
Audio Compression| G.711A, G.711U, ADPCM, AAC
2-way Audio| Support
Audio Detection| Support

Event

| Event Trigger| Motion Detection, IP Conflict, Port Alarm
Event Notification| Relay Out, Email, FTP
Pre-Alarm Recoding| Support
Interface| Analog Out| 1 BNC Out
Audio In / Out| 1 In / 1 Out
Alarm In / Out| 2 In / 1 Out
SD Slot| Micro SD (Up to 128 GB)
RS-485| Support
Network| Ethernet| RJ-45 10, 100 BASE-T
Security| Password protection, IP filter
Open Protocol| ONVIF (Profile S)
Protocol| IPv4 / IPv6, HTTP, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, TCP, UDP, DHCP, PPPoE
Integrated Software| Mobile application (iPhone, iPad, Android)
Connections| 4 Level, 8 Users
General| Power Source| DC 12 V, AC 24 V, PoE
Maximum Power Consumption| 11 W
Maximum Input Current| 810 mA (AC 24 V), 880 mA (DC 12 V), 230 mA (PoE)
Operation Temperature / Humidity| -30 ˚C to 60 ˚C / 0 % RH to 95 % RH
Protection| IK10, IP66
Dimension (W x H x D)| 150 mm × 122 mm
Weight| 0.96 kg
Camera| Image Device| 1 / 3” CMOS
---|---|---
Lens Type| 3.3 -10mm, Motorized Lens
Day / Night| Dual ICR

Minimum Illumination

| Color: 0.5 lux @ F1.4 (AGC on)
B/W: 0 lux @ IR LED on
IR Distance| 30 m
Image Enhancement| Configurable Brightness, Saturation, Contrast, Flip Mode, HLC, Smart Defog, Corridor, EIS
Video / Audio| Compression| H.265, H.264 HP / MP / BP, M-JPEG
Resolution| 60 Hz: 1440p @ 25fps, QXGA @ 25fps ,1080p @ 30fps, 960p @ 30fps, 720p @ 30fps
50 Hz: 1440p @ 25fps, QXGA @ 25fps ,1080p @ 25fps, 960p @ 25fps, 720p @ 25fps
Maximum Frame Rate| 30 fps @ 2048 × 1536, 60 fps @ 1280 × 720
Multi-Streaming| Up to 3
ROI (Smart-Codec)| Support (Up to 4 zones)
Video Analytics| Tripwire, Perimeter, Missing&Foreign object, Crowd, Loitering, Fast Moving, Parking, Audio Offline
Text Overlay| Support
Audio Compression| G.711A, G.711U, ADPCM, AAC
2-way Audio| Support
Audio Detection| Support
Event| Event Trigger| Motion Detection, IP Conflict, Port Alarm
Event Notification| Relay Out, Email, FTP
Pre-Alarm Recoding| Support
Interface| Analog Out| 1 BNC Out
Audio In / Out| 1 In / 1 Out
Alarm In / Out| 2 In / 1 Out
SD Slot| Micro SD (Up to 128 GB)
RS-485| Support
Network| Ethernet| RJ-45 10, 100 BASE-T
Security| Password protection, IP filter
Open Protocol| ONVIF (Profile S)
Protocol| IPv4 / IPv6, HTTP, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, TCP, UDP, DHCP, PPPoE
Integrated Software| Mobile application (iPhone, iPad, Android)
Connections| 4 Level, 8 Users
General| Power Source| DC 12 V, AC 24 V, PoE
Maximum Power Consumption| 11 W
Maximum Input Current| 810 mA (AC 24 V), 880 mA (DC 12 V), 230 mA (PoE)
Operation Temperature / Humidity| -30 ˚C to 60 ˚C / 0 % RH to 95 % RH
Protection| IK10, IP66
Dimension (W x H x D)| 150 mm × 122 mm
Weight| 0.96 kg

References

• LG Open Source
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>