ibin TT-SB Series Stainless Steel Oval Sensor Trash Can User Manual

June 4, 2024
ibin

Stainless Steel Oval Sensor Trash Can
User Manual

Features

  • Soft lid opening and closing
  • Extra-wide lid opening accommodates large and bulky items
  • Odor Filter System
  • Air vents at the base ease removal of a full bag
  • Powered by 4 “D” size batteries (not included)

We’re here to help!
If you have any questions or concerns about this product, please contact Customer Support for immediate assistance. You can reach us at zgloblabvba@gmail.com Your 100% satisfaction is our #1 goal!
About your ibin Trash Can
The touchless sensor operation promotes a germ-free environment. The lid sensor uses invisible and harmless, patented infrared technology for accurate and responsive lid  pen nd close operation. There are two buttons on the front of the lid, “OPEN” and “CLOSE”, to open and close the lid manually, and an ON/OFF power switch on the back f the trash can lid. The infrared sensor on the lid will automatically open the lid when your hand or object is within 6 inches/10 cm of the sensor. The lid will remain open f the sensor detects any object within its radius and will automatically close in 4 seconds after the object is withdrawn.
Indicator Light (LED Light)

  1. When there is an object in the Sensor Zone, the LED Indicator Light will remain green and the Lid will remain opthe en until object is removed from the sensor zone.
  2. indicate that the lid will close in 6 seconds.
  3. red, the light will turn solid green again and the Lid will remain open.

Contents of the Box

  • Sensor Trash Can Lid
  • Brushed Stainless Steel Can Body
  • Trash Bag Retainer Ring
  • User Manual

Operating Instructions

  1. Remove Lid Unit from the trash can. Open battery compartment cover to insert 4 “D” size batteries. Replace cover.
  2. Insert one 13-gallon to 18-gallon trash bag through Trash Bag Retainer Ring and wrap the top part of the bag over the Ring (STEP 1 in How To Use The Trash Bag Retainer Ring). Put the Ring onto the top edge of the can body (STEP 2).
  3. Place the Lid Unit onto the can body and make sure it is securely attached.
  4. Turn on the power switch on the back of Lid Unit. A red Indicator Light will turn on for 3
  5. Place hand or any object 6 inches above the Infrared Sensor on the front of Lid Unit to open. When there is an object in the Sensor Zone, the LED Indicator Light will remain green and the Lid will remain open until the object is removed from the Sensor Zone. Once the item is lid will close in 6 seconds. If an object is placed back into the Sensor Zone when the LED opens.
  6. If you press the open button, Lid will open, and remain open for 5 minutes before closing automatically – unless you press the close button. The trash can will then resume operating in automatic mode.

How To Use The Trash Bag  retainer Ring

ibin TT-SB Series Stainless Steel Oval Sensor Trash Can - Fig
4

STEP1: Place trash bag inside trash can, then wrap the top of the bag over Ring.
ibin TT-SB Series Stainless Steel Oval Sensor Trash Can - Fig
3 STEP2: Secure the Ring onto the edge of the can body.
*How to Use the Odor Filter  if provided with your model
** Some models of the Touchless Trash Can are equipped with an Odor Filter Compartment that houses the odor-neutralizing Activated Carbon Odor Filter. One (1) replaceable  dor Filter is pre-installed inside the Odor

|
---|---

  1. Filter Compartment. Please follow these instructions upside down.
  2. Slide Odor Filter Compartment (Fig.1) to the right (Fig.2) to remove.
  3. Remove Activated Carbon Odor Filter from the Compartment.
  4. Remove the new Odor Filter pouch from the plastic bag (Do NOT cut open the Odor Filter pouch).
  5. Insert a new Odor Filter pouch (Fig.3) into the Compartment.
  6. Return the Odor Filter Compartment to Lid Cover (Fig.1) and slide to the left (Fig.2) to lock the Odor Filter Compartment in position.
  7. Replace the Odor Filter every 3 months or when the odor becomes too strong.

General Troubleshooting Steps

  1. Turn the power switch to “Oft remove the battery or AC power adapter, then rub and wipe clean the sensor area with a soft damp cloth and dry it immediately with a soft dry cloth. Re-insert batteries or plug in the AC adapter (DO NOT USE battery and AC adapter at the same time).
  2. Place the trash can in an open area where nothing is blocking or within 10 inches of the sensor eye. Make sure no sunlight or direct light shines on the sensor. Turn on the power and try opening lid again.
  3. If trash can is still not working correctly, remove the batteries or AC adapter. Let the trash can sit for at least 2 hours to reset. Try opening lid after resetting.
Problem Solution
1.   The trash can is brand new, and only works occasionally Peel off the

thin, transparent protector/sticker on top of the sensor eye. If the lid still doesn’t work regularly, try a new set of batteries. Then follow the General Troubleshooting Steps.
2.   The lid stays open or lid opens and closes continuously| The sensor eye may be affected by dirt, stain, dust, moisture or reflection. Move the trash can to a different location or turn the trash can slightly so that the sensor faces another direction, and follow the General Troubleshooting Steps.
3. Grinding noise when the lid opens/closes| This can be caused by broken gears or lid hinge.
· Check for damage on the hinges that connect to the lid
· Follow the General Troubleshooting Steps
4. The lid does not open/close Important: Do ot  adapter  and the AC power same time. It can  only be powered by one source at a time.| If you are using Batteries: · Ensure batteries are inserted correctly and close the battery cover firmly If you are using  C Power Adapter: Unplug the adapter and insert new alkaline batteries to see if the lid works on battery If the lid  orks with batteries, the AC adapter may be broken
5. I wave my hand over the sensor eye, but the lid does not open| It is not a motion sensor. Hold your hand or object steadily (do not wave your hand) within 4-6 inches over the sensor eye for it to detect and open.

Parts

Attention

  1. Do not submerge the lid in water as it houses the electronic control. You may clean it with a lightly dampened cloth.
  2. Clean the trash can body only with products safe for use on stainless steel.
  3. Do not press or force the Lid Cover to close. The lid will close automatically after your hand is removed from the sensor zone.
  4. Replace batteries immediately when the indicator light turns yellow/amber. This will ensure the lid continues to operate properly.
  5. Avoid direct sunlight on the infrared sensor.
  6. Ensure there is enough room to operate the trash can without blocking the opening and closing of the lid.
  7. Do not use a power adapter that is not authorized by SensorCan.com; it may result in fire, electric shock, or injury.
  8. Do not use the power adapter and battery at the same time to operate the trash can. It can only be powered by one source at a time.
  9. Do not overstuff the trash bags. It may cause tearing or difficulty removing.
  10. Automatic parts may not be suitable for small children or pets.

Two (2) Year Limited Warranty
Oval Sensor Trash Can is distributed by TurboTronic.com with the highest quality components and most advanced technologies available. The trash can is warranted to be free from defects in material and workmanship, given normal use and care, for 730 days from the date of the original purchase with proof of purchase within Europe. TurboTronic.com will only honor warranty requests from orders placed with our authorized dealers. Items sold as used, floor sample or refinished are sold solely under the terms and conditions of the selling party TurboTronic.com will not warrant a such purchase. TurboTronic.com will repair or replace a working condition Lid Cover thereof that fails as the result of such a defect during the warranty period.
The warranty is the customer’s exclusive remedy for product defects and does not apply to:

  • User modification
  • Attachments to the product by the user that causes damage
  • Any product, on which the seals and/or serial numbers have been broken, removed, tampered with, defaced, or altered in any manner
  • Damage caused by abuse, misuse, accident, water, or theft

Except as stated above, TurboTronic.com makes no express or implied warranties as to any product, in particular, makes no warranty of merchantability or of fitness for any particular purpose. TurboTronic.com shall not be liable for consequential or incidental damages arising from any product defect. Our Liability is limited to the replacement of any defective product. TurboTronic.com expressly disclaims all warranties not satisfied in this limited warranty. Any implied warranties that may be imposed by law are limited to the terms of this limited warranty. The Can Body, Retainer Ring, and Battery Cover are not covered by this warranty.

© 2019-20 All Rights Reserved. Z-Line
TurboTronic® www.zline-world.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals