LANON H500 Safety Work Gloves Instructions
- September 18, 2024
- LANON
Table of Contents
LANON H500 Safety Work Gloves
Product Specifications
- Product Name: H500 Safety Work Gloves
- Manufacturer: LANON Protection Technology Co., Ltd
- Distributed by: LANON Protection LLC
- Manufacturing Address: Suite T1-2302, SOHO Tianshan Plaza, Changning, Shanghai, China
- Distribution Address: 2275 Huntington Dr., PO BOX 810, SAN MARINO, CA, 91108, USA
- Trademark: LANON
Product Usage Instructions
Information and User Instructions
Please read and understand the entire manual before using the gloves. For detailed information on the gloves’ performance and limitations, refer to the sections on warnings, maintenance, and usage instructions.
Safety Guidelines
- Inspection Before Use: Always inspect gloves for any defects or imperfections before use. Do not use damaged, dirty, or worn-out gloves.
- Duration of Use: Prolonged use of gloves in certain environments can cause discomfort. Take regular breaks to inspect your hands for any signs of irritation or fatigue.
- Proper Fit: Ensure the gloves fit properly. Ill-fitting gloves can impair dexterity and increase the risk of accidents.
Cleaning and Maintenance
The product should be cleaned with a damp cloth (warm water) without chemicals or by brushing and drying in the air. Check the product for damage after cleaning and before wearing it again. Do not reuse damaged products. Depending on the type of cleaning, this can have a negative effect on the performance of the product. The manufacturer accepts no responsibility for any improper cleaning of the product.
Storage and Disposal
- Storage: Keep away from direct sunlight, store in a cool dry place. Keep away from ozone sources or naked flame.
- Proper Disposal: Used gloves may be contaminated with infection or other hazardous materials. Dispose of according to Local Authority Regulations. Landfill or incinerate under controlled conditions.
Frequently Asked Questions
- Q: What is the purpose of these gloves?
- A: These gloves are designed for general mechanical protection, gardening, and industrial use.
- Q: How should I clean the gloves?
- A: Clean the gloves with a damp cloth using warm water without chemicals or by brushing. Air dry them and check for damage before reuse.
- Q: How should I store the gloves?
- A: Store the gloves away from direct sunlight in a cool dry place, and keep them away from ozone sources or naked flame.
Manufactured by:
- LANON Protection Technology Co., Ltd Suite T1-2302, SOHO Tianshan Plaza, Changning, Shanghai, China
Distributed by:
LANON Protection LLC 2275 Huntington Dr., PO BOX 810, SAN MARINO, CA, 91108, USA LANON is a registered trademark of LANON Protection LLC.
- Tel: +1 213-723-8688
- Email: info@lanonpro.com
Information and user instructions
Please read and understand the entire manual before using the gloves. For
detailed information on the gloves’ performance and limitations, refer to the
sections on warnings, maintenance, and usage instructions. These gloves are
designed and manufactured in accordance with the EU Regulation 2016/425 on
Personal Protective Equipment (PPE). They comply with the essential health and
safety requirements set out in this regulation.
A copy of the EU Declaration of Conformity can be obtained from LANON upon
request. They were classified as cat. Il – for medium hazards only. This
product is designed to minimize the risk/provide protection against general
mechanical risk.
Product Purpose：
- These gloves are designed for general mechanical protection, gardening, and industrial use.
Inspection Before Use
- Always inspect gloves for any defects or imperfections before use. Do not use damaged, dirty, or worn-out gloves.
Duration of Use：
- Prolonged use of gloves in certain environments can cause discomfort. Take regular breaks to inspect your hands for any signs of irritation or fatigue.
Proper Fit:
- Ensure the gloves fit properly. Ill-fitting gloves can impair dexterity and increase the risk of accidents.
Cleaning / Maintenance
- The product should be cleaned with a damp cloth (warm water) without chemicals or by brushing and drying in the air. Check this product for damage after cleaning and before wearing it again. Do not reuse damaged products. Depending on the type of cleaning, this can have a negative effect on the performance ofc the product The manufacturer accepts no responsibility for any improper cleaning ofc the product.
- Storage: Keep away from direct sunlight, and store in a cool dry place. Keep away from ozone sources or naked flame.
- Proper Disposal: Used gloves may be contaminated with infection or other hazardous materials. Dispose of according to Local Authority Regulations. Landfill or incinerate under controlled conditions.
- Pictogram and performance levels in accordance with EN 388:2016+A1:2018 All tests were carried out under laboratory conditions on the palm of the hand. Respective performance levels were determined on this basis.
All performance levels in accordance with EN 388:2016+A1:2018 (highest performance level: 4, for cut resistance: 5, for ISO cut resistance: F) only apply to the palm area of the glove. Level X can also be applied for a to e and stands for “Not tested” or “Not applicable”. For dulling during the cut resistance test, the coupe test results are only indicative while the TDM cut resistance test is the reference performance result.
Warning:
Plastic bags can be dangerous. To avoid the risk of suffocation, keep this bag away from babies and children. Some gloves might contain ingredients which are known to be a possible cause of allergies in sensitized persons. If allergic reactions should occur, obtain medical advice immediately. It should not be worn when there is a risk of entanglement with moving machine parts. Not suitable for use near open flames, high-heat environments, chemical handling, sharp objects, pointed objects or for electrical work
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>