Macally mCup Adjustable Automobile Cup Holder Mount User Guide
- June 16, 2024
- MACALLY
Table of Contents
mCup User’s Guide
Adjustable Automobile Cup Holder Mount
for iPhone, iPod, Cell Phone, MP4, GPS and PDA
Introduction
Thank you for purchasing the Macally mCup. Macally mCup is an adjustable
automobile cup holder mount made to hold iPhone, iPod, Cell Phones, MP4, PDA,
and GPS.
Before you begin using the Macally mCup, be sure to read this user’s guide in
its entirety.
Package Contents
- mCup
- 1 Pair of Long Grip Arms
- 1 Pair of Short Grip Arms
- User’s Guide
Specifications
- Suitable for various models of Cell phone, iPhone, iPod, MP4, GPS, and PDA
- Adjusts to fit almost any cup holder
- Maximum holding device width: 2 1/2 Inches
- Minimum holding device width: 1 3/4 Inches
Macally Product Information
Registration
Please register this product at
www.macally.com/register.html.
Technical Support
Please E-mail us at techsupport@macally.com,
or techsupport@macally-europe.com
In U.S.A. please call 1-909-230-6778
Mon-Fri 8:30 AM – 5:30 PM, Pacific Standard Time
Warranty
Macally peripherals warrants that this product will be free from defects in
title, materials and manufacturing workmanship for one year from the date of
purchase. If the product is found to be defective then, as your sole remedy
and as the manufacturer’s only obligation, Macally will repair or replace the
product. This warranty shall not apply to products that have been subject to
abuse, misuse, abnormal electrical or environmental conditions, or any
condition other than what can be considered as normal use.
Limitation of Liability
The liability of Macally Peripherals arising from this warranty and sale shall
be limited to a refund of the purchase price. In no event shall Macally
Peripherals be liable for costs of procurement of substitute products or
services, or for any lost profit, or for any consequential, incidental,
direct or indirect damages, however caused and on any theory of liability,
arising from this warranty and sale. These limitations shall apply not with
standing any failure of essential purpose of any limited remedy.
Copyright® 2009 by Macally Peripherals
Hardware Basics
Installing the mCup
- Begin the installaion by first releasing the Screw Knob, simply twist the Screw Knob and the Expandible Side Grip will expand outward.
- Place the mCup into your car’s cupholder and adjust the side grip for a snug fit.
- Once you have placed mCup into the car cup holder, twist the Screw Knob again to lock mCup securely in place.
Installing the mCup
The package includes two differet sizes of grip arms; a pair of short grip arms, another pair of long grip arms. These grip arms are interchangeable. Please use the configuration that best fits your need.
Adjusting the mCup
To change the viewing angle, simply twist the neck lock and adjust the mount angle to accommodate your viewing comfort. To change between vertical view and horizontal view, simply hold and rotate the grip arms.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>