omega altise OHV40C High Velocity Chrome Floor Fans Instruction Manual
- June 16, 2024
- omega altise
Table of Contents
OHV40C & OHV46C
High Velocity
Chrome Floor Fans
Important Safety Instructions
- Read all instructions.
- Disconnect the power plug before dismantling, assembling or before cleaning.
- Avoid touching mobile parts of the fan.
- Make sure the fan is on a dry and even surface.
- Never insert fingers, pencils or any other objects through the guards whenever the power plug is connected, especially while running.
- The appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely.
- Young children or infirm persons should be supervised to ensure that they do not play with the appliance.
- Do not use the appliance for any other purpose than its intended use.
- The fan must not be used if the guards are not fastened according to instructions.
- When the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
- Do not use your appliance with an extension cord unless it has been checked and tested by a qualified electrician or electrical supplier.
Read all instructions before using this unit. Keep them for future reference.
Specifications
| Model | OHV40C | OHV46C |
|---|---|---|
| Rated Voltage | 220-240V / 50Hz | |
| Watts | 60W | 120W |
| Dimensions (hxwxd)cm | 49x50x20 | 54x57x24 |
| Controls | Rotary switch | |
| Settings | 3 speed | |
| --- | --- | |
| Fan blade size | 40cm | 46cm |
| Tilt action | Tilting fan head | |
| Oscillation | No | |
| Warranty | 2 year replacement |
Parts List
- Fan base tube
- Metal blade
- Fan head
Operating Instructions
-
Remove all items of packaging from the fan. This unit comes fully assembled.
-
Use in a dry place, free of excessive humidity and water.
-
To set the fan in motion turn the rotary switches at the back of the unit to the desirable speed:
0 = OFF 1 = LOW 2 = MEDIUM 3 = HIGH -
The direction of the airflow is vertically adjustable by tilting the fan head.
-
Turn the switch knob to OFF and unplug the power cord when the fan is not in use.
Fan Direction Adjustment
- Do not attempt to make any adjustment to the direction of the grille and fan assembly until the fan has been turned off and unplugged from the socket.
- To adjust the direction of the fan, hold the grille and gently tilt the fan until the desired position is reached.
- Plug the fan back into the socket and turn the fan on.
Care and Maintenance
- Always disconnect the cord from the electrical outlet when cleaning your fan.
- Light accumulated dust may be removed from the fan with a soft cloth or vacuumcleaner using the dusting brush attachment.
- Wipe the exterior surfaces of the fan occasionally with a cloth moistened (not dripping wet) with a mild soap solution. Dry the case thoroughly with a soft dry cloth before operating the fan.
- Avoid the use of gasoline, benzine, thinner etc as they may result in damage to the fan.
- Store the fan in a clean dry place when not in use.
CAUTION! Do not immerse the fan in water or allow water to drip into the
interior of the fan housing as this could create a fire or electric shock
hazard.
WARNING! Do not attempt to open or repair the fan yourself. Doing so
could void the warranty and cause damage or personal injury.
Omega Altise products are distributed in Australia by MEA,
(A Division of Hagemeyer Brands Australia Pty Ltd)
ABN 28 001 375 686
Locked Bag 4013, Kingsgrove NSW 2208
Phone: 1300 739 033
Fax: 1800 838 899
Email:
customerservice@meaappliances.com.au
Web: meaappliances.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>