sikkerthjem S7PRO Alarm System User Manual

sikkerthjem S7PRO Alarm System

Product Information

The product is a security system designed to keep your home or office safe from intruders. It comes with a SmartBox that acts as the control center for the system. The SmartBox has a built-in siren that emits a loud sound when the system is triggered. It also has connectivity features such as LAN, Wi-Fi, and GSM/LTE. The system can be controlled using a mobile application that is compatible with iOS 7.0 and later, and Android 4.3 and later. The system also includes cameras that can be used for live streaming and recording.

Technical Specifications

• Processor: ARM Cortex-A7 CPU
• Power Supply: DC 5V 2A
• Standby Time: Up to 8.5 Hours
• Backup Battery: Rechargeable Lithium Polymer Battery 2600mAh
• Connectivity: LAN, Wi-Fi 2.4 GHz (802.11 b/g/n), GSM/4G LTE
• Built-in Siren: 100dB/30cm
• Housing Material: ABS/PC
• Working Temperature: Supported
• SIM Card Support: Supported
• Mobile Applications: iOS 7.0 and Later, Android 4.3 and Later
• RF Specification: 433.92MHz Up to 1000m Supported
• Max no. of users: 100
• Video Monitoring: Supported, camera sold separately

Product Usage Instructions

To use the security system, follow these steps:

System

• Arm, Disarm, and Home Mode: Use the ON/OFF button to switch between modes.
• Call for Help: Press the SOS button to call for help in case of an emergency.
• Set System Security Rules: Use the mobile application to set up security rules for the system.

Smart Devices

• Operate SmartBulb, SmartPlug, etc.: Use the mobile application to control smart devices that are connected to the system.
• Accessory Setup: Use the mobile application to set up smart devices that are not yet connected to the system.

Sensors and Cameras

• Add New Sensors and Accessories: Use the mobile application to add new sensors and accessories to the system.
• Livestream from Cameras: Use the mobile application to view live video from cameras that are connected to the system.
• View Camera Recordings: Use the mobile application to view recordings from cameras that are connected to the system.
• Setup Cameras: Use the mobile application to set up cameras that are not yet connected to the system.

Users

• Invite Users and Guests: Use the mobile application to invite users and guests to access the system.
• Invite Administrators: Use the mobile application to invite administrators to manage the system.

Note: The indicator light on the SmartBox will flash red when it is initializing or in connection mode. It will be constant red when the system is armed, constant green when it is disarmed, and constant blue when it is in home mode.

Safety

This home security system is designed to reduce the risk of burglary and other household hazards depending on the connected sensors and accessories. However, this system does not guarantee your safety and you should therefor always act prudently and take reasonable precautions even with the system installed. Any security system, including this one, is subject to compromise or failure for a numbers of  different reasons, including but not limited to:

• An intruder may gain access through unprotected openings.
• An intruder may have the technical knowledge to bypass a sensor or the whole system.
• Signals sent by the panel or sensors might be blocked or reflected by objects in your home, eg. metal furniture, refrigerators, etc.
• Motion sensors can only detect within the specified range and view-angle. Motion outside of this or motion hidden by obstacles will not trigger the alarm.
• Limited or no service from third party providers, like your internet service provider, mobile carrier, etc.
• Hardware failure in panel, sensors and accessories.

Requirements

• An internet router with an available RJ4S port and/or 2.4 GHz Wi-Fi (IEEE 802.ll b/g/n standard).
• An iPhone or Android smartphone running iOS 7.0 or Android 4.3 or newer and that features Bluetooth version 4.3 or newer.
• [Sold Separately] A SIM card with a working carrier plan or sufficient funds on the account.

Quick Start

Network preparation
To connect your new alarm system to the internet. you must decide if you want to connect it via ethernet cable (LAN) or wirelessly trough Wi-Fi. If possible, we highly recommend you use the LAN cable for highest stability. Please have your Wi-Fi password avaliable, if you decide to connect through Wi-Fi.
Wi-Fi 2.4 GHz (WEP/WPA/WPA2 encrypted)+ LAN support, IPV4 protocol LAN 70/l00M Ethernet

Insert SIM card (sold separately)
Make sure the SIM card you insert has an active subscription plan or sufficient data and credit to send text messages and make calls and that PIN protection is disabled. You can deactivate
PIN reques on a new SIM card by inserting it in a mobile phone and use its menus to disable it.
Make sure the SmartBox is powered off before inserting the SIM card.

Locate the SIM card slot in the bottom of the battery compartment.
Push the metal cover of the tray in the “Open” direction until you hear a click and lift it up.

Place you micro SIM in the tray with the chip-side downwards.

Close the metal cover over the SIM card and push it back until you hear a click to lock it.

Be careful not to bend or scratch neither the chip on the SIM card and the copper connectors in the SIM card tray when inserting the SIM card.

Find a suitable location for the SmartBox
If you have decided to connect the panel via Ethernet cable. you need to place the SmartBox close to your router or a LAN switch. You will also need to make sure you have a power outlet nearby in order to power the SmartBox with the included power supply.
If you have decided to connect the panel to your Wi-Fi network ,you will need to choose a location with strong Wi-Fi signal. You can use your mobile phone to test the signal strength of the location before you proceed. You will also need to make sure you have a power outlet nearby in order to power the SMartBox with the included power supply.

Power on
Connect the included power supply to the panel and to a power outlet near the chosen installation location. If not off already, remove the back-cover on the bottom of the panel to access the power switch. Push the power switch to ON.
The logo on the top of the SmartBox will flash red for 4-5 seconds during initialization and confirm with a beep.

Download appen
Download the app by scanning the below QR code or search for 57PRO in the Apple App Store or Google Play Store. Create an account in the app, or login if you already have one.

Connect the SmartBox
Important Bluetooth must be turned on on your mobile phone before continuing. Make sure Bluetooth is enabled on you mobile phone and hold the phone close to the SmartBox during the connection process. If you manually needs to put the SmartBox into connection mode, remove the back cover on the bottom of the SmartBox and hold >1!1w until you hear a beep.

Scan the QR code
Go to the app home screen after creating your account. Tap f-3 and scan the QR code on the back of the SmartBox.

Connect the SmartBox
The app will now search for your SmartBox. Tap the SmartBox when it shows on the screen.

Setup the SmartBoxen
Set you PIN
Set a 4 digit PIN code for your system. This will be used to operate the system from the SmartPad. Must be set even if you do not own a Smart Pad.

Connect to the internet
Select how you want to connect the system to the internet.

LAN connection
Connect the included Ethernet cable to the SmartBox and your router and tap LAN.

Wireless Wi-Fi connection
Select the Wi-Fi network you want to connect to on the list and enter your Wi- Fi password as prompted on the screen.

4G connection
Tap 4G connection on the list. Requires a SIM card in the SmartBox.

Install accessories
Please note that all included sensors and accessories are already connected to the SMartBox and all you need is to install them using the included tape or screws.
Remember to remove the battery insulation strip or turn on the sensor before installing .

Done. You are ready to use your new alarm system.
Setup of your new home security system is now done and you can start using it right away. To learn more about the system features and how it works, please continue reading.

System States

Armed
When the system is armed, all connected sensors will be active. This state is used when nobody is home. If a sensor is triggered during this state, it will send a wireless signal to the SmartBox which will then set off the alarm.

Home Mode
In Home Mode only specific sensors that you have chosen will be active. You can select which sensors you want to be active in this state under [Settings] – [System Settings] – [Customize Home Arm]. A good use of this state, is to have the contact sensors on your doors and windows active, but not your motion sensors. This will allow you to move around freely in the house, but if a door or window is opened, the alarm will go off.

Disarmed
When the system is disarmed, no sensors will be active. This state is used when you are home and want the system to be inactive.

sos
The system automatically enter this state  if a sensor is triggered while the system is either Armed or in Home Mode or the SOS button in the app is tapped. When the system enters the SOS state, users will immediately be notified about the incident, including information on what sensor set the alarm off. Both SmartBox’s build-in siren, as well as any other connected sirens will start to sound as well.

User Authorities

You can set different authotity levels for each user of the system. We highly recommend you to only have one Administator, as this authority level gives unristricted acces to your alarm system.
SMS contacts have no system authority and will only be notified during alarm

SmartBox overview

Top view

Indicator: Status

• Flashes red : SmartBox initializing
• Flashes red, green and blue:  SmartBoxen is in connection mode
• Constant red:  System is armed
• Constant green:  System is disarmed
• Constant blue : System is in Home Mode

Rear view

Rear view

How to use the app

Settings

Tap the gear icon on top of the home screen to access [Settings].

Add users and SMS contacts

Invitation QR codes for new users are generated under [Users with access to you system].
New users must install the app on their phone and scan the QR code to access the system. SMS contacts are added by entering their phone number. They do not need to install the app, they cannot access the system and will only receive notifications in case of alarm.

More customizable functions

Smart Widget
Settings] – [Common Functions] – [Smart Widgets]

• Anti jamming
  Warns you if interfering signals are detected in the area.

• TI med tasks
  A task can be set to a specific time, e.g. Set Home Mode every night  atlO PM.

• Smart Follow
  lntructions can be executed automatically base on system state, e.g. Turn on SmartBulb when the system is Disarmed.

Home Mode
[Settings]- [Customize Rules] – [Arm Rules] – [Customize Home Mode] You can specify which sensors you want to be active during Home Mode.
Only supported sensors will be shown in under [Customize Home Mode].
Read more on page 8.

Care Mode
Home Screen] – [Common
Functions] – [Care Mode] Specify which sensors should be part of Care Mode. When the system is either Disarmed or set to Home Mode, the system will automatically activate Care Mode. If the selected sensors are not triggered within a predefined timeframe, notifications will be sent  to warn that something might be wrong.
This feature is recommend for people who live on theiR own.
Especially seniors.

Ready to Arm
[Settings]- [Customize Rules] – [Arm Rules] – [Ready to Arm] Be warned if a door or window is open when you try to arm the SY5tem.
If its a deliberate decision, you can force the activation even though the door or window is still open.

More security settings
[Settings] – [Customize Rules] – [Arm Rules] Entry Delay
When a sensor with entry delay is triggered, the alarm will not go off until after the specified time.
Exit Delay
The SY5tem will not become active until after The specified time.
Siren Duration
Set the siren to sound for 7-30 minutes during alarm or mute it completely.

More accessory settings
[Settings] – [Door/window Sensor] or [Motion Sensor] – [Accessory Settings] – [Mode]

Chime
If an indoor siren is connected to your SY5tem, you can specify a sensor to work as a door chime when its triggered. override tamper protection
Temporary override the tamper protection on a sensor. During the override, the sensor will not set off the alarm or send out notifications.

CMS Connection
[Settings]- [Security Notifications] – [CMS] Connect your system to a central monitoring station. S7pro supports CMS connection via SIA-DC-09 protocol with Contact ID message format through UDP or TCP port.

Duress protection
[Settings]- [Security Notifications] – [Duress Alarm Settings] Create a fake Pl N code to the system, to be used in case of duress.
The PIN will disarm the system, but at the same time, secretly send a predefined SOS message to the other users and SMS contacts.

4C network selection
[Settings] – [Advanced Settings] – [4G Network Selection]  S7pro is set to automatically connect to the best available network.
If necessary, you also have the option to manually input APN information. 4G is from the factory activated as a system backup and will automatically be used, ifa SIM card is inserted, during disconnection of LAN and Wi-Fi for more than app. 60 seconds.

FAQ

I cannot find my SmartBox on the list during setup
Press and hold until you hear a beep. You SmartBox should show on the list within a couple of minutes.

I get a message about Bluetooth has been disconnected
Press and hold until you hear a beep. Check that Bluetooth is enabled on your mobile phone.

I get a message about Bluetooth disabled on my phone
It is important that Bluetooth is enabled on your phone before starting the setup process of your 57pro system. Bluetooth is enabled under [Settings] on your mobile phone.

Will the system still work if my internet connection is down?
S7pro can connect to the internet through both wired LAN (Ethernet) and wireless Wi-Fi. In addition to this, we highly recommend you to insert a SIM card in the system.
With an active SIM card in your SmartBox, the system will automatically backup to 4G in case your internet connection is down.
If you internet connection is down because of a power outage, the system will continue to run
on its backup battery.

How do I reset the system?
Factory reset on hardware: Remove the battery compartment cover in the bottom of the SmartBox and press and holde the Reset button for 5 seconds.
Factory reset in the app: Go to [Settings] – [Advanced Settings] – [Reset SmartBox].
Note that all data will be deleted from the system during factory reset.

I find the app to be slow
To ensure optimal communication between the app and your SmartBox, follow these steps.

• If you have not already connected your SmartBox through wired LAN, please do so.
• Restart your router.
• If you use a VPN, please disable this.

You can easily check the connection of your SmartBox by tapping on the SmartBox in the app,

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful a interference in a residential installation. This equipment generates uses and can radiate radio and frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device awith part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Specifications

Processor

• CPU
  ARM Cortex-A7

Power Supply

• Power DC 5V 2A
• Standby Time Up to 8.5 Hours
• Backup Batter Rechargeable Lithium Polymer Battery 2600mAh

Connectivity

• LAN 1xRJ45 10 / 100M Ethernet Interface
• Wi-Fi  Wi-Fi 2.4 GHz (802.11 b/g/n)
• GSM / LTE GSM / 4G LTE

Other

• Built-in Siren l00dB/30cm
• Housing Material ABS / PC
• Working Temp -10°C ~ 60°C
• SIM Card Support Micro SIM Card
• Mobile Applications iOS 7.0 and Later, Android 4.3 and Later

RF Specification

• Frequency 33.92MHz
• Coverage Up to 1000m
• RF Supervision Supported

Key Features

• Quick Connect Pre-connected, QR-connect and Bluetooth connect
• Anti-tamper Protection Supported
• Duress Alarm Supported
• Low Battery Warning Supported
• Smart Follow & Timed Task Supported
• OTA Updates Supported
• Ready to Arm Supported
• No. of systems a user can join 10
• Max no. of users 100
• Video Monitoring Supported, camera sold separately
• Alarm Notifications Push notifications and SMS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>