Marshall i2009630 Guitar Speaker Cabinets User Guide

: June 16, 2024
: Marshall

Table of Contents

Marshall i2009630 Guitar Speaker Cabinets
GETTING STARTED
WARNING! IMPORTANT SAFETY INSTRUCTIONS
ABOUT COMPANY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Marshall i2009630 Guitar Speaker Cabinets

Marshall-i2009630-Guitar-Speaker-Cabinets-fig-1

GETTING STARTED

Congratulations on purchasing your Marshall cabinet. Our cabinets are designed with you in mind, with each speaker specially selected for its tone and each unit lovingly crafted. We’ve got over 50 years’ worth of experience and this allows us to deliver meticulously planned, high quality products. From major international festivals and multi-million pound recording studios to local bars and bedroom band practice, our cabinets are built to stand the test of time and fulfil all your performance needs.

4×12 mono/stereo switching facilities
To ensure maximum flexibility, some of our 4×12* cabinets boast a mono/ stereo switching system on the back. When ‘stereo’ mode is selected, the cabinet is split into two 82 ‘halves’ for use with a stereo amp. When ‘mono’ is selected you are offered two different impedance inputs (452 or 1652) to choose from. Always ensure you select the correct one to match the impedance of your amplifier and never use both inputs at the same time when the cabinet is in ‘mono’ mode.

Mono/stereo selection switch. Selects either stereo or mono mode.
Right input. When switch (1) is set to:
Stereo, this provides connection to the right* side pair of speakers. Rate at 8Ω
Mono, this provides connection to all four speakers. Rated at 4Ω
Left input. When switch (1) is set to:
Stereo, this provides conection to the let side pair of speak speakers Rated at 8Ω
Mono, this provides connection to all four speakers.
Right and left refer to the two stereo sides of the cabinet as seen when facing the front of the cab.

2×12° stereo selection facilities

Some of our 2×12* cabinets are fitted with a mono/stereo selection plate on the back. This enables you to split the cabinet into two halves for use with a stereo set-up if you desire.
Mono usage: Use the input marked mono (1), the impedance of which is clearly indicated above the jack.
Stereo usage: Use both inputs (1 and 2). Once again the impedance of each is clearly marked.

Single mono input

Some cabinets are fitted with a single mono input socket. With this cabinet the impedance and power rating are fixed.
Use a suitable speaker cable to plug your guitar amplifier into this socket.
Ensure the impedance and power handling of the cabinet is compatible with your chosen amplifier.

WARNING! IMPORTANT SAFETY INSTRUCTIONS

Please read the instruction manual for this speaker cabinet and any other equipment to be used with this speaker cabinet carefully before use.

Read these instructions.
Follow all instructions and heed all warnings.
Do not attempt to remove or re-wire the internal speakers or any other components within the speaker cabinet.
Never use a speaker cabinet or associated equipment in damp or wet conditions. No obiects filled with liguids should be placed on the apparatus.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Ensure any associated equipment is switched off and unplugged from the mains in the event of lightning storms or if unused for long periods of time.
Only use attachments/accessories specified by the manufacturer.
Always ensure all associated equipment is switched off and unplugged from the mains before connecting or disconnecting the speaker cabinet.
Always sure that the supplied speaker lead is used to connect the speaker cabinet to associated equipment. Always plug the speaker lead into the speaker cabinet before plugging it into the amplifier.
Protect the speaker lead from being walked on, pinched or having heavy objects rolled over it. Ensure the speaker lead is not entangled with any other lead. If a replacement speaker lead is required, please contact your authorised Marshall Dealer.
If the speaker cabinet has switchable impedance, please ensure that the correct impedance is selected and that any associated equipment impedance settings are also correctly set.
If the speaker cabinet has mono/stereo switching capability, ensure that the switch is in the correct position for the desired operation.
Always move or transport speaker cabinets individually. Never attempt to move or transport speaker cabinets if they have other cabinets or associated equipment stacked on or under them.
Always ensure that the speaker cabinet is on a level surface, whether used or stored individually, or as a speaker cabinet stack, and/or with associated equipment placed underneath or on top.
Marshall speaker cabinets should only be stacked with compatible Marshall speaker cabinets. Never attempt to stack another manufacturers speaker cabinet with a Marshall speaker cabinet. If you are unsure, contact your authorised Marshall Dealer.
Refer all servicing to qualified personnel. Servicing is required when the speaker cabinet has been damaged in any way, such as liquid being spilled or objects falling into it, the speaker cabinet being exposed to rain or moisture, the speaker cabinet not operating normally or being dropped or damaged in any way
KEEP THESE INSTRUCTIONS.