GVSHINE YH0623 WRGB Solar Wall Light User Manual
- June 16, 2024
- GVSHINE
Table of Contents
GVSHINE YH0623 WRGB Solar Wall Light
Product Information
Specifications:
- Waterproof Rating: IP67
- Installation: Easy
- Power Source: Solar
- Auto ON/OFF: Yes
- Reflector Lens: Special Designed
- LEDs: 2
- Solar Panel: 5-Volt
- Rechargeable Battery: 3.7-Volt
Product Usage Instructions
The Way It Works:
The solar panel of the product charges the built-in rechargeable battery in
6-8 hours. During the day, the solar panel converts sunlight into electricity,
then automatically illuminates for 8-10 hours (1st dim mode) / 8 hours (2nd
bright mode) once night falls. All you need to do is switch it ON, install it
onto the places you need, and admire the light in the night.
Illuminating Your Light:
- Featuring 2 LEDs and reflector lens
- 5-Volt Solar Panel
- 3.7-Volt Rechargeable Battery
Package Includes:
The package includes the solar wall light and installation hardware.
Installation as Easy as 1, 2, 3:
Your solar wall light comes ready for use since they arrive already
assembled! There are two ways to install this product:
- Option A: Install with screws:
- Put up the installation gauge (included) at the places where you wish to install the light.
- Drill two holes (about 47.6mm apart).
- Push in the expansion pillar and the screws. The screws need to stand out the wall about 3-5mm.
- Hang the product on the screws (refer to FIG 1).
- Option B: Stick with red sticker:
- Use the red sticker to stick the product onto the desired place (refer to FIG 2).
- Turn on the power switch, as it arrives in off mode.
Choosing Light Mode:
To choose different light modes, follow these steps:
- Press the ON/OFF power switch to switch it ON.
- Press the switch multiple times to cycle through different light modes:
- Mode 1: Warm white mode
- Mode 2: Red light mode
- Mode 3: Green light mode
- Mode 4: Blue light mode
- Mode 5: Color Auto Change mode (the light changes gradually from warm white to blue)
- Press the switch again to turn off the light.
The power switch is located at the bottom of the light (refer to FIG 3).
Enjoying Your Light:
Sit back and enjoy the sweet ambiance light in the night.
Note: Place the light away from porch lights or other light sources, as
bright lights can prevent it from automatically illuminating. Also, place the
solar wall light where it can get 6-8 hours of direct sunlight a day.
Important Notes:
- No need to worry about the weather. The structure of the light is designed to be IP67 waterproof.
- Wondering if it’s ON? Simply cover the solar panel with your hands or place it in a dark environment, and the light should light up. If it doesn’t, put it in direct sunlight to charge for 6-8 hours, then test again.
- If the lights lose illumination time or intensity, a dusty solar panel may be to blame. To guarantee a consistent glow, simply clean the solar panel every 3 months.
- This light is a dusk to dawn light, it works all by itself. It is designed to turn on in the nighttime (the surrounding environment is dimmer than 10-100 lux), charge in the daytime (beyond 100 lux), and stay off during the daytime.
- The performance of the solar light is dependent on the geographical location, weather conditions, and seasonal sunlight availability.
FAQ:
- Q: What should I do on cloudy days or during winter?
A: On cloudy days and during winter, the solar light will not receive as much direct sunlight, resulting in reduced brightness and reduced operating time. In such cases, please turn the light on dim light mode at lower brightness.
The Way It Works:
The solar panel of the product changes the built-in rechargeable battery in
6-8 hours. During the day, the solar panel converts sunlight into electricity,
then automatically illuminates for 8-10 hours(1st dim mode) / 8 hours(2nd
bright mode) once night falls. All you need to do is switch it ON, install it
onto the places you need, and admire the light in the night.
Illuminating Your Light:
- Featuring 2 LEDS and reflector lens
- 5-Volt Solar Panel
- 3.7-Volt Rechargeable Battery
Package Includes
- WRGB Solar wall light × 1
- Installation hardware × 1 set
- Installation gauge × 1
- Red slicker × 1
- Instruction manual × 11
Note: Multiple packs contain multiple lights(1) and multiple set of installation hardware.
Installation as Easy as 1, 2, 3
Your solar wall light come ready for use since they arrive already assembled! Two ways of install this product:
-
A. Put up the installation gauge(included) at the places where you wish to install the light, drill two holes(about 47.6mm apart), push in the expansion pillar and the screws, the screws need to stand out the wall about 3-Smm. Hang the product on the screws.1 B. Or use the red sticker to stick the product onto the desired place(refer to FIG 2).
1C.turn on the power switch,as it arrives in off mode
Mode 1: Press the switch once,it is ” warm white ” mode
Mode 2: Press again,it is “red light” mode
Mode 3: Press again, it is “green light” mode
Mode 4: Press again, it is “blue light” mode
Mode 5: Press again for “Color Auto Change” mode, the light changes gradually from “warm white” to “blue”, press again to turn off the light. -
Press the ON/OFF power switch to switch it ON and choose different light color: warm white — red —green — blue — color auto changing(the switch is at the bottom of the light, refer to fig 3)
-
Sit back and enjoy the sweet ambiance light in the night.
Note: place it away from porch lights or other light sources, as bright lights can prevent it from automatically illuminating. Place the solar post light at places where it can get 6-8 hours of direct sunlight a day.
Important Notes
- No need to worry about the weather. The structure of the light is designed to be IP67 waterproof.
- Wonder if it’s ON? Simply cover the solar panel with your hands or place it in a dark environment, and the light should light up. If they don’t, put them in direct sunlight to charge for 6-8 hours, then test again.
- If the lights lose illumination time or intensity, a dusty solar panel may be to blame. To guarantee a consistent glow, simply clean the solar panel every 3 months.
- This light is a dusk to dawn light, it works all by itself. It is designed to turn on in the night time (the surrounding environment is dim than 10-100 lux), it charges in the daytime (beyond 100 lux) and stay off in the daytime.
- The performance of the solar light is dependent on the geographical location, weather conditions and seasonal sunlight availability.
- On cloudy days and during winter, the solar light will not receive as much direct sunlight, resulting in reduced brightness and reduced operating time, please turn the light on dim light mode at lower brightness.
- Minus temperature may result in shorter illumination time. To protect the battery, minus 10g degrees and above may shut the light to OFF mode, please be informed the light is NOT DEFECTIVE, it will resume to work once the temperature picks up.
CORRECT DISPOSAL OF THIS PRODUCT:
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that if should
not be disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
user should contact either the retailer where they purchased this product or
their local government office for details of where and how they can take this
item for environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal.