WILEY X SG-1 Two Lens with Black Frame 71 Instructions
- June 16, 2024
- WILEY X
Table of Contents
WILEY X SG-1 Two Lens with Black Frame 71
Product Information
- Specifications
- Model: ERX-ICSG1(1)
- Manufacturer: Wiley X
- Address: 7800 Patterson Pass Road, Livermore CA 94550 USA
Product Usage Instructions
- Gasket Installation – Step 1
- As pictured, engage the slot at the bottom of the lens gasket into the tab at the bottom of the hybrid frame.
- Gasket Installation – Step 2
- Rotate the gasket up to engage the corresponding slot and tab at the top of the hybrid.
- Lens Removal
- Hold the product as pictured.
- Lift the frame at the nose bridge while pushing down on the lens to create about 1/4 inch separation between the lens and frame.
- Hold the frame at the nose piece and rotate the lens from the top of the frame.
- Temple / Strap Removal
- Press the tab located in the graphic above to release either the temples or the strap.
- Maintenance
- Wiley X lenses are specially coated to offer superior abrasion resistance. To prolong the life of your lenses and keep them performing at their best:
- Clean lenses with water only.
- Do not use solvents or special cleaners.
- Use the micro-fiber cleaning cloth provided to gently wipe clean.
- Never use paper products to clean and avoid wiping the lens surface when dry and/or dirty as this may potentially scratch the lens.
- FAQ
- Q: How should I clean the lenses?
- A: Clean lenses with water only. Do not use solvents or special cleaners. Use the micro-fiber cleaning cloth provided to gently wipe clean. Never use paper products to clean and avoid wiping the lens surface when dry and/or dirty as this may potentially scratch the lens.
INSTALLATION STEPS
- GASKET INSTALLATION – STEP 1
- As pictured, engage the slot at the bottom of the lens gasket into the tab at the bottom of the hybrid frame.
- GASKET INSTALLATION – STEP 2
- Rotate the gasket up to engage the corresponding slot and tab at the top of the hybrid.
- LENS REMOVAL
- Hold the product as pictured.
- LENS REMOVAL
- Lift the frame at the nose bridge while pushing down on The lens to create about 1/4 inch separation between the lens and frame.
- LENS REMOVAL
- Hold the frame at the nose piece and rotate the lens from the top of the frame.
- TEMPLE / STRAP REMOVAL
- Press the tab located in the graphic above to release either the temples or the strap.
MAINTENANCE
Wiley X lenses are specially coated to offer superior abrasion resistance. Please follow the below instructions to prolong the life of your lenses and keep them performing at their best:
- Clean lenses with water only.
- Do not use solvents or special cleaners.
- Use a micro-fiber cleaning cloth provided to gently wipe clean.
- Never use paper products to clean and avoid wiping the lens surface when dry and/or dirty as this may potentially scratch the lens.
WARNING: Wiley X brand eyewear is tested tough. However, impact-resistant eyewear is not unbreakable and does not provide unlimited eye protection under all circumstances and conditions. Misused, abused, scratched and/or damaged eyewear can reduce impact protection (and void your limited warranty). Dirty and/or wet eyewear can impair vision and reduce safety (resulting in personal injury and/or property damage). Keep your Wiley X eyewear clean with water only. Do not use solvents or abrasives as it could scratch or damage the product reducing its effectiveness. Store your Wiley X eyewear in the protective case provided to prolong the life of the lenses. Most of all, take all appropriate precautions when wearing your Wiley X eyewear during hazardous and/or dangerous activities and conditions. Wiley X, Inc. is not responsible for personal injury, property damage or losses incurred while using Wiley X brand products.
COPYRIGHT © 2016 WILEY X, INC. ALL RIGHTS RESERVED.
- WILEY X, WX, BLACK OPS, logos, tag lines and product names are trademarks or registered trademarks (marcas registradas) of Wiley X, Inc. in the U.S. and other countries.
- Logos © 2007-2016 Wiley X, Inc. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>