Transcend TS-CM10G M.2 PCIe SATA SSD Enclosure Kit User Guide
- June 16, 2024
- Transcend
Table of Contents
Transcend TS-CM10G M.2 PCIe SATA SSD Enclosure Kit User Guide
Portable Design with Aggressive Heat Dissipation
Transcend’s CM10G M.2 SSD enclosure is made of aluminum and plastic, and
includes a shock-absorbent silicone rubber cover. Its compact, lightweight,
and antiscratch design makes it perfect for portability. Plus, it features
enhanced heat dissipation as well as an LED indicator light that lets you know
when the drive is in use.
M.2 Form Factors Supported
Transcend’s CM10G M.2 SSD enclosure supports both PCIe and SATA III 6Gb/s
interface SSDs in M.2 form factors (2230/2242/2260/2280). Both M key and B+M
key types can be inserted into the slot.
10Gbps Fast Performance
Transcend’s CM10G M.2 SSD enclosure offers transfer speeds up to 10Gbps and
supports UASP, delivering R/W speeds up to 1000MB/s*. Experience the
incredible power of blistering speed and great performance.
*CM10G performance will vary according to factors such as the type of SSD installed and the interface of your device. Not all M.2 SSDs may reach the speeds stated above.
Features
- USB Type-C and USB Type-C to Type-A cable included
- Supports M.2 PCIe/SATA SSDs
- Tool-free installation
- Supports all M.2 form factors (2230/2242/2260/2280)
Specifications
Appearance
Dimensions: 112.6 mm x 34.4 mm x 15.4 mm (4.43″ x 1.35″ x 0.61″)
Weight: 57 g (2.01 oz)
Interface
Connection Interface: USB 10Gbps
Operating Environment
Operating Temperature: 0°C (32°F) ~ 60°C (140°F)
Storage Temperature: -40°C (-40°F) ~ 85°C (185°F)
Operating: Voltage 5V
Warranty
Certificate: CE / UKCA / FCC / BSMI / KC / RCM
Warranty: Two-year Limited Warranty
Package
Package: Contents Enclosure / Thermal pad / Rubber clip / Rubber cover / USB Type-C to Type-C cable / USB Type-C to Type-A cable / Quick Start Guide.
Ordering Information
0MB: TS-CM10G
Product specifications are subject to change without notice. Pictures shown may differ from actual products. Total accessible capacity varies depending on operating environment.
© Transcend Information, Inc. All Rights Reserved.
Transcend’s CM10G is an enclosure designed specifically for M.2 PICe or SATA SSDs. By following the tool-free installation guide, you can turn an M.2 PCIe/SATA SSD into a portable USB 10Gbps external drive to harness the full potential of your system.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>