ZHUHAI P2 Multifunctional Pedal User Manual
- June 16, 2024
- ZHUHAI
Table of Contents
ZHUHAI P2 Multifunctional Pedal User Manual
Overview
Thank you for purchasing our product. This product is a powerful multi-
functional pedal.It can be used on Android,
HarmonyOS, Mac OS, iOS, Windows and Linux system to achieve page turning,
mouse operation, game operation, media control, short video switch,etc.
Advantages
- Support Bluetooth BLE 5. 1 connection, lower power consumption and faster response
- Support USB cable connection without delay > Support 10 working modes and widely applied to various application scenarios
- Cool LED make sure to press on the right place in the dark environment.
- Quiet multi-functional pedal design, comfortable and no noise interference
- Automatic shutdown to save power and long standby time > Built-in large capacity rechargeable lithium battery, long service life, long battery life
Appearance
- Connect your computer or power adapter. Support USB cable connection without delay
- Power and LOGO light: Low power, the red light flashes; Charging, the red light keep on; Full or normal power, the green light keep on
- Mode light: Indicates the current mode; Mode 1-5 are red light; Mode 6-10 are green light
- Mode button: Long press, turn On/Off; Short press, switch the working modes
- Foot button, tap or hold to achieve the current mode function. Hold left+ right button while power on could turn on/off the indicator LED
Features
The five light on the panel are both red and green. Mode 1-S are red; Mode 6-10 are green; Specific function in the following table.
Note: Slide only support on Android/iOS
Usage
- Press the mode button for 3 seconds to power on the device. When the device is not connected, the mode light flashes
- Search and connect the bluetooth. After the connection is successful, the mode light stops flashing
- lf you want to use the USB connection, please use USB cable to connect the computer (USB cable must be able to transmit datas)
- Click the Mode button to switch modes, and then step on the pedal to trigger the corresponding function
- lf you need to save power, you can turn off the pedal indicator light. Long press the mode key to shut down, and then step on the two pedals at the same time, turn it on again; This setting automatic memory, if you need to turn on the indicator light, please use the same method
- After use, you can power off by long pressing the mode button
FCC Warning
*FCC Warning Statement Changes or modifications not expressly approved by the party,responsible for compliance could void the user’ s authority to operate the equipment. This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection. against
harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/D technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.