SIOXCFZ 49 Floor Standing Digital Signage User Guide

Floor Standing Digital Signage
User Guide (V1.0)

Attention

1. Please have a check on the user guide about the operation guidance before using.
2. Do not splash liquid on the digital signage.
3. Do not put the digital signage under sunlight directly.
4. Normal use is protected by our warranty terms. Damage caused by abnormal use is not protected by warranty terms.
5. lf you required with any support from us, please contact our after-sales support team.

Accessories

What’ sin Box:

Body & BasePower Cord 1 Remote Controller 1M6 screw 16 Cross screw driver 1 Wheels4Allen wrench1 M8 screw 6 & Key 2

Installation Guidance

1. Wheels installation on the base(If you don’t want install wheels, jump to next step). Using the cross screw driver to screw in the 4 M6 screws on each wheel.
2. Put the digital signage body on a bench, and install the base. Use the Allen wrench to screw in the 6 M8 screws to fasten the base.
3. Put the signage on the floor, get the power connected. And turn the power switch on.

Operation Guidance

1. Remote controller

2. The Autoplay application will start up automatically. The quick Starting is the Plug and Play Mode function.
   Put your media contents into the USB flash disk root directory.
   And plug into the digital signage USB port. It will play the media contents automatically.

3. Also you can make settings on the Autoplay application, set with Copy Mode. Set up a file folder named with “AutoPlayFile” on your USB flash disk. Put your media contents into that “AutoPlayFile”. After you plugged your USB flash disk into the digital signage, it will copy the media contents from your USB flash disk “AutoPlayFile” into the digital signage’s internal memory. So that you can plug out your USB flash disk after your media contents was copied successfully to the internal memory.

4. HDMI Input Supported.
   You can install your player box inside of the digital signal. There’s AC power plug and HDMI input port inside the door available for your player box. Make the settings on digital signage. Set on the “Auto Start Settings”, select the HDMI input, so that it will display the HDMI input signal automatically after the digital signage powered on.

5. Timer Switch
   You can make auto ON/OFF schedule on the Timer switch application.

After-sales Support

If you had any technical inquiry, please contact us directly.
Email: support@marveltechgroup.com
Phone: 6284885213 (WhatsApp Online)
+8618123978547 (WhatsApp Online)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>