YonTune B0CCXT53K2 Bluetooth Sports Headband User Manual

B0CCXT53K2 Bluetooth Sports Headband
User Manual

Operation

There are 4 buttons on the headband’s control panel: the “M” button and 3 buttons in a row below the M button labeled “-”, Play/Pause”, and “+”.
And there are 5 ways to press the buttons: click; double click; short press (1 second); long press (2 seconds); and very long press (4 seconds). Please execute the correct press to get the desired function.
Mode Switch:
short press (to toggle between “White Noise” mode/Bluetooth mode)
Timing Setting :
double click (for 30 minutes/again for 60 minutes/again to cancel the timed turn-off) Bluetooth Pairing

1. Turn on Bluetooth mode of the headband: very long press(4s) the “M” button, the LED lights are flashing
2. Turn on the Bluetooth on your device
3. Find the name “BT-01” and tap to connect, the LED lights off

Charging
Connect a Type-C cable to a USB charger (or a USB port on a computer), and the otherend to the device port as indicated below. During charging, the LED indicator in the middle of the device will be a constant red, and it will change to a constant blue light after the battery is fully charged.
Bluetooth Version
lf your mobile phone or other Bluetooth audio device is not equipped with the AVRCP function, the earphone’s NEXT/PREVIOUS song and PLAY/STOP commands will not pass to the device when pressed. Check to see if a software update is available for your audio device.
Washing Steps:

1. Remove Module
2. Take Out Electronic Components
3. Washing

SPECIFICATIONS

IN THE BOX

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>