Mebak S3 Hearing Aids for Seniors User Manual

Mebak S3 Hearing Aids for Seniors User Manual

PRODUCT INTRODUCTION

Product Parameters

Product Parameters
Product Name: In Ear Hearing Aid Earbuds
Model: Mebak 3
Application Scope: For people with mild to moderate hearing impairment as per actual test
Product Structure: The earbuds consist of mic, signal processor amplifier circuit, speakers, battery, case and embedded software (Version V1.0).
Performance Parameters:

Specification & parameters are the data from lab test.

WHAT’S IN THE BOX?

1. Earbud 2

2. Charging case*1

3. sets of earbud caps: 2setseachforlarge, medium and small size

4. Charging cable*1

5. Cleaning brush *1

6. Hanging Rope*1

FEATURES

Remove insulation sticker before use

HOW TO WEAR

BASIC OPERATIONS

Power On/Off
The earbuds will automatically power on when they are taken out of the charging case and power off when they are put back into the charging case; Touch Area  (Sw1 Button)  Touch Area (SW1 Button)

Connect to Bluetooth Devices

The earbuds will automatically power on after being taken out of the charging case. Search the name of hearing aid earbuds on the mobile device and select Mebak 53 for Bluetooth pairing.
Search “Mebak S3” for Bluetooth Paring.
Earbuds Pairing
The earbuds will be automatically paired after being taken out of the charging case;

Take earbuds out of the charging case

Automatic pairing

To re-pair the earbuds after restoring default settings, please put the earbuds back into the charging case and open the lid, press and hold the button at the bottom for 12 seconds ill the blue indicator light on the charging case lights for 3 seconds, which means the earbuds have been re- paired successfully.

Press and hold for 12 seconds

Blue indicator lights for 3 seconds

Hearing Aid Mode

1. **ctivate )} Hearing Aid:

   ---

   **Hearing aid mode will be automatically activated after power-on.

2. Inactivate Hearing Aid:****  

Hearing aid mode will be automatically inactivated after being removed from ear.

Hearing aid mode will automatically be activated again after being worn in ear.
When the device is connected to Bluetooth, the media sound will be played automatically and the hearing aid mode will be inactivated.

3. Switching of Hearing Aid Scenes
   Double click the SW1 button to switch among different hearing aid scenes (indoor mode, outdoor mode, strong noise mode)
   Double click SW1 button

4. Selection of Scene Mode
   Select indoor mode when ambient noise is low (daily indoor activities)
   Select outdoor mode when the ambient noise is loud (outdoor activities)
   Select strong noise mode when the ambient noise s strong (outdoor traffic)

5. Adjustment of Hearing Aid Volume:
   In hearing aid mode, click the SW1 button to adjust the hearing aid volume.
   Click SW1 button

Music Mode

When the earbuds are connected to Bluetooth for music playing, you can play/pause the music or adjust the volume and switch the music by the streaming APP in the phone.
Click SW1 button

Phone Mode

1. Answer/Hang Up Call:
   Click the SW1 button to answer/hang up the phone call;
   Click SW1 button

2. Reject Call:
   Press and hold the SW1 button for 2 seconds to reject the incoming cally :
   Press and hold the SW1 button for 2 seconds

3. Activate Voice Assistant:
   When the phone is connecting to Bluetooth or playing music, press and hold the SW1 button for 1 second and release to activate the voice assistant;
   Press and hold SW1 button for 1 second

Restore Default Settings

Press and hold the SWL button for 12 seconds after power off and the voice prompts “beep”.
Press and hold SW1 button for 12 seconds

The indicator flashes blue and green for 5 times, which means Successfully restore of default settings.
Indicator flashes blue and green for green for

Power Management

1. Low Battery Warning:
   When the battery is low, the warning will prompt every 2 minutes, and the voice prompts “low battery”, the indicator flashes blue 3 times every 30 seconds to remind you to charge the earbuds in time.
   Indicator flashes blue 3 times every 30 seconds

2. Shutdown Without Power:
   When the earbuds are out of power, the voice will prompt “power off”, and the indicator will turn green for 2 seconds before automatic shutdown. Please charge the earbuds as soon as possible.
   Indicator will turn green for 2 seconds before shutdown

Descriptions for Charging Case Indicator

When the earbuds are placed inside the charging case, The indicators on the charging case flashes once per second.

|
---|---
When the battery is less than 30%,  the left indicator willl fash;| When the battery is between 30% and 70%, the left indicator will be always on and the middle indicator will flash;
|
When the battery is more than 70%, the left and middle indicators will be always on and the right indicator will flash;| When the battery reaches 100%, all the three indicators will be always on.

Note:

1. If the earbuds are not in service, please place them back into the charging case;
2. Please fully charge the earbuds before the first use.

CHECK LIST OF SIMPLE MALFUNCTION

again.
3. Volume is too high| 3. Turn down the volume
4. Earbud cap is too bigortoo small| 4. Choose the earbud cup with suitable size
5. Charging case is out of power| 5. Please charge the case
No sound| 1. Low battery| 1. Charge
2. Sound outlet is blocked| 2. Clean the sound outlet
3. Touch switch is out of function.| 3. Deliver for repair
4. Battery malfunction| 4. Deliver for repair
Noise sound| 1. Low battery| 1. Charge
2. Battery malfunction| 2. Deliver for repair

TROUBLESHOOTING

1. Charging Failure

2. Check whether the insulation sticker has been removed
   Check and clean the charging contacts of the earbuds and the charging case. Please try again with the original charging cable.

3. Low Volume

4. Check whether the earbud cap s clean. If not, please clean or replace the new one.

5. Check whether the battery is low. If yes, please charge the earbuds.

6. When the earbuds are powered on, the whistling can be heard before wearing
   The whistling stops when they are placed back into the charge case, please try the steps as follows:
   Step 1: Choose an earbud cap with suitable size.
   Step 2: Place the earbuds back into the »
   Step 3: Clean your ear canals.
   Step 4: Take out the earbuds again and get ready to wear. Do not touch the micwhile holding the earbuds in hand.
   Step 5: Wear the earbuds once again.

SAFETY NOTICES AND PRECAUTIONS

1. Please place the earbuds back into the charging case once being removed from the ears lest they may get lost or damaged.

2. D0 not place the hearing aid earbuds in an environment with high temperature (e.g., heat sources, exposed fires) and high humidity; otherwise, the device may suffer from malfunction, fire or explosion.

3. D0 not immerse the earbuds in any liquid. Please remove the earbuds before swimming, hair washing or showing; do not wear the earbuds until the ear canals have been dry after swimming or showing.

4. Please keep the surface of hearing aid earbuds clean and clean the earwax in the outlet regularly. If some symptoms such as redness and swelling appear on the skin, please stop using immediately and consult a doctor.

5. D0 not disassemble the earbuds without authorization. Any damages due to unauthorized disassembling will not be covered by
   the warranty.

6. The earbuds are not resistant to corrosive liquids such as seawater, acidic and alkaline solvents, chemical reagents and other corrosive liquids. Any damages or defects caused by misuse or improper use will not be covered by the warranty.

7. The device and accessories may contain some small parts, please keep them beyond the reach of children.

8. If the device will not be in service for long, please power off after being fully charged and stored in a cool and dry place.

9. Please charge with the provided charging cable. The power adaptor selected should meet the requirements of appropriate safety standards or CCC authentication.

10. D0 not dispose the waste device arbitrarily. Please abide by the relevant national regulations for the proper disposal.

Warranty Card

Mebak S3 Warranty Card

12 months warranty for non-human damage from the date of purchase
Recipient’s Name|
Contact Information|
Recipient’s Address|
Return Reason|
Return             Replace      Repair
Order No.|
Note: The above information is only for the use of Mebak after-sales service, and Mebak promises to protect all customer privacy information.
Email: [email protected]

‘Support E-mail: [email protected]
EC REP
Name: Sea&Mew Consulting GmbH
Address: Mittenhuber Straße 4, 92318 Neumarkt
Contact Person: Yuan Li
Tel: +4915224685061
Email: [email protected]
UK REP
Name: Sea & Mew Accounting Ltd
Address: Electric Avenue Vision 25, London, Enfield EN3 7GD
Contact Person: Billy Han
Tel: +44 7399648608
E-mail: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>