COUSO 405-000248 Wireless Keyboard and Mouse Combo User Manual

June 4, 2024
COUSO

405-000248 Wireless Keyboard and Mouse Combo

Wireless Keyboard and Mouse Combo
User ManualCOUSO 405 000248 Wireless Keyboard and Mouse
Combo

405-000248 Wireless Keyboard and Mouse Combo

COUSO 405 000248 Wireless Keyboard and Mouse Combo - FIG
1

SETUP

COUSO 405 000248 Wireless Keyboard and Mouse Combo - FIG
2

  1. Remove the keyboard and mouse from the box, and remove the USB receiver from the mouse battery compartment.
  2. Install 1AAA battery properly into the keyboard. Switch the power on.
  3. Install 2 AAA batteries properly into the mouse. Switch the power on.
  4. Plug the USB receiver into the USB port of the computer
  5. The mouse and keyboard are ready to use after the driver is installed automatically on the computer.

SHORTCUT KEYS FOR MULTIMEDIA PLAYER
FN+F1=Media Player
FN+F2=Volume –
FN+F3=Volume +
FN+F4=Mute
FN+F5=Previous Track
FN+F6=Next Track
FN+F7=Play/Pause
FN+F8=Stop
FN+F9=Home Page
FN+RO=Email
FN+R1=My Computer
FN+F12=Favorites

INDEPENDENT MULTIMEDIA KEYS

COUSO 405 000248 Wireless Keyboard and Mouse Combo - FIG
3

FEATURES

  1. The mouse and keyboard share one receiver, and the receiver is in the battery compartment at the bottom of the mouse.
  2. Adjustable mouse DPI levels: 800-1200-1600 (the default setting is1200).
  3. It has an automatic sleep mode and wake-up mode. When it is not used for 8 min, the mouse will enter the sleep mode. Press any button to wake up the mouse. Turn off the power switch to save power if the mouse is left unused for a long time.

CONSIDERATIONS

  1. Use a 1.5V AAA battery only. To protect internal components from damage, avoid using batteries of high voltage. If the product is unused for a long time, take out the battery to prevent the components from being corroded.
  2. The product adopts 2.4GHz wireless transmission with a 10-meter transmission distance. The distance may be shortened due to big obstructions and low battery.
  3. For the first use, the product may fail to work (connection error, etc.) for it has been unused for a long time. Try pairing again.

SOLUTION TO CONNECTION FAILURES

Keyboard

  1. Take out the battery from the keyboard and the receiver from the computer.
  2. Reinstall the battery into the keyboard, and plug the receiver into the USB port of the computer.
  3. Turn on the power switch of the keyboard, which should be 20cm away from the receiver. Press and hold “ ” and “ ” keys together to pair again.

Mouse

  1. Take out the battery from the mouse and the receiver from the computer.
  2. Reinstall the battery into the mouse, and plug the receiver into the USB port of the computer.
  3. Turn on the power switch of the mouse, which should be 20cm away from the receiver. Press and hold the Right button and Scroll button together to pair again.

Note: If the solution doesn’t help, repeat the above procedures to pair again. If it still can’t work, contact our service team to work for you. Please send an email to this address: csforcustomer@gmai.com.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
CORRECT DISPOSAL OF THIS PRODUCT
( Waste Electrical& Electronic Equipment ) This Marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
Disposal of a battery into a fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC’s radiation exposure limits set forth for an uncontrolled environment.
The device must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals