GLOBO LIGHTING 41280-24 HOKKI Ceiling Light Installation Guide
- June 16, 2024
- GLOBO LIGHTING
Table of Contents
GLOBO LIGHTING 41280-24 HOKKI Ceiling Light
Product Information
Specifications
- Model: 41280-24
- Power: 1x24W
- Voltage: 220-240V~
- Frequency: 50/60Hz
FAQ
- Can I replace the LED light source?
- No, the LED light source of this product is not replaceable.
- What are the available Kelvin settings?
- The available Kelvin settings range from 2700K to 6500K.
- How do I activate the night light mode?
- To activate the night light mode, set the Kelvin setting to 2700K and adjust the brightness to 10%.
Product Usage Instructions
Turning the Product On and Off
- To turn on the product, switch the power button to the “ON” position.
- To turn off the product, switch the power button to the “OFF” position.
Adjusting Lumen and Kelvin Settings
- The product allows you to adjust the lumen and Kelvin settings to customize the lighting according to your preference.
- The available Kelvin settings range from 2700K to 6500K.
Night Light Mode
- The product features a night light mode that emits a soft and gentle light.
- To activate the night light mode, set the Kelvin setting to 2700K and adjust the brightness to 10%.
Replacing the Light Source
- The light source of this product is not replaceable.
- Do not attempt to replace the LED light source.
Power
Power Off
Power On
Installation Instructions
Remote Using And Features
Light source
- The light source is not interchangeable because it is determined by the surrounding product design.
- This product contains a light source of energy efficiency class
. - The control gear cannot be replaced.
- The LED – light source cannot be replaced.
GLOBO Handels GmbH
- Gewerbestrasse 3
- A-9184 Sankt Peter AUSTRIA
- www.globo-lighting.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>