Bestway 58230 Pool Plus Drain Pump Instruction Manual

Bestway 58230 Pool Plus Drain Pump

Product Information

Specifications

• Model: #58230
• Product Name: Pool+ Drain Pump
• Power: 220-240V~50Hz, 80W
• IP Rating: IPX8
• Maximum Head Height: 2.2m
• Minimum Head Height: 0.02m
• Maximum Suction Height: 1.22m

Parts Reference Overview

Before assembling the drain pump, become familiar with all parts. Refer to Fig.1 for part references.

Parts List:

• P6005 Hose Seal Ring
• P6124 Hose Clamp
• P6556 Hose Adapter
• P6555 Hose Adapter
• P6H565 Hose

Product Usage Instructions

Pump Installation and Operation

1. Connect the provided hose to the drain pump.

Pump Maintenance and Storage

CAUTION: You must ensure the drain pump is unplugged before performing maintenance or severe risk of injury or death exists.

1. Unplug the pump.
2. Loosen the hose clamps, and remove the hose from the drain pump.
3. Dry the pump with a cloth and store it in a dry location out of reach from children.

Disposal

Electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.

FAQ

• Q: How do I order spare parts for the drain pump?
  A: To order spare parts for the drain pump, list the part number.

• Q: Can I use the drain pump for commercial purposes?
  A: No, this product is not intended for commercial use.

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

• WARNING – The pump is to be supplied by an isolating transformer or supplied through a residual current device (RCD)having a rated residual operating current not exceeding 30 mA.

• WARNING – The power source on the wall of building should keep more than 4m away from pool and at a height of 1.2m at least.

• WARNING – The appliance must be supplied by earthed power source. WARNING – RISK OF ELECTRICK SHOCK – The pump cannot be used while people are inside the pool.

• DO NOT BURY CORD. Locate cord to minimize abuse from lawn mower, hedge trimmers, and other equipment.

• WARNING – TO REDUCE THE RISK OF ELECTRIC SHOCK – The supply cord cannot be replaced. If the cord is damaged the appliance should be scrapped.

• WARNING – Extension cords can’t be used.

• CAUTION – This pump is for use with storable pools only. Do not use with permanently-installed pools. A storable pool is constructed so that it is capable of being readily disassembled for storage and reassembled to its original integrity. A permanently-installed pool is constructed in or on the ground or in a building such that it cannot be readily disassembled for storage.

• IMPORTANT – Using the pump with an unmatched electrical supply is dangerous and will result in catastrophic failure of pump.

• RISK OF ELECTRIC SHOCK – When working with electricity, turn the electrical power off at the circuit breaker and lock breaker door. Failure to do so will result in increased risk of shock, injury and possibly death.

• DO NOT REMOVE THE GROUNDING PRONG OR MODIFY THE PLUG IN ANY WAY. DO NOT USE ADAPTOR PLUGS. Consult a qualified electrician for any questions related to the validity of your plugs grounding. Handle the pump with care. Do not pull or carry the pump by the power cord. Never pull a plug from the outlet by yanking the power cord. Keep cord free from abrasions. Sharp objects, oil, moving parts, and heat should never be exposed to the pump.
  Disconnect the pump from the supply mains before carrying out user maintenance such as cleaning the filter.
  This appliance shall not be used by children. Cleaning and User maintenance shall not be carried out by children. Always disconnect the appliance from the supply before assembling, disassembling or cleaning.
  Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
  Children shall not play with the appliance.
  Pumps without indication that they are protected against the effect of freezing shall not be left outside during freezing weather conditions. Cleaning and user maintenance must be performed by an adult above 18 years old who is familiar with the risk of electric shock.

• Caution : Read the instructions before using the appliance and installation/reassemble each time.

• WARNING – RISK OF ELECTRIC SHOCK – Do not put the plug into the water.

• NOTE: Please examine equipment before use. Notify Bestway at the customer service address listed on this manual for any
  manufacturing defect or missing parts at the time of purchase. Verify that the equipment components represent the pump model that you had intended to purchase.

• NOTE: The plug of pump shall be at least 3.50m away from the pool.

• NOTE: Atmospheric conditions may affect the performance and life span of your pump. Unnecessary wear and tear may occur during periods of cold, heat and exposure to sun. Whenever possible shelter the pump from these conditions.
  It is imperative to change as soon as possible all the deteriorated parts. Only use the parts approved by the manufacturer.

• IMPORTANT: Always remember to unplug the drain pump after each using.

• NOTE: Assembly and disassembly by adults only.

• NOTE: The pump is used for cleaning and other maintenance of swimming pools. Don’t plug or unplug the appliance if your hand is wet.
  Always unplug the appliance:

  • On rainy days
  • Before cleaning or other maintenance
  • Leave it unattended on holiday.

• When the appliance will be not used for a long time, such as in the winter, the pump should be disassembled and stored indoors. Safe-keeping the instruction. For reconstruction of the pool set every time, please always refer to the instructions. If the instruction is missed, please contact Bestway or search it on the website: www.bestwaycorp.com

• NOTE: This product is not intended for commercial use.

Parts Reference Overview

Before assembling the drain pump, become familiar with all parts. (See Fig.1)

NOTE: To order spare parts for the drain pump, list part No.

Pump Installation and Operation

1. Connect the provided hose to the drain pump by fastening the hose clamp. (See Fig.2)
   • NOTE: Two types of hose adaptors are provided to be used with different garden hoses, see Fig.3 & Fig.4 for assembly.
2. Vertically place the drain pump into the pool with the other end of hose to the drain area.(Check local regulations for drainage by-laws)
   • NOTE: Do not put the plug into the pool.
3. To turn on the pump, insert the plug into a proper socket.
   • NOTE: When the water level of the pool is less than 2cm, do not use the drain pump.
   • NOTE: Keep the drain pump vertical at all times.
   • NOTE: Do not dry run the pump.

Pump Maintenance and Storage

CAUTION: YOU MUST ENSURE THE DRAIN PUMP IS UNPLUGGED BEFORE PERFORMING MAINTENANCE OR SEVERE RISK OF INJURY OR DEATH EXISTS.

• Unplug the pump.
• Loosen the hose clamps, and remove the hose from the drain pump.
• Dry the pump with a cloth and store in a dry location out of reach from children.

DISPOSAL
Electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.

References

• Home Page

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>