COOGHI K1 Multi Purpose Toddler Tricycle Instruction Manual

June 16, 2024
COOGHI

COOGHI K1 Multi Purpose Toddler Tricycle Instruction Manual
COOGHI K1 Multi Purpose Toddler Tricycle

Thank you for choosing the Muli-Purpose Toddler Tricycle.

To use this product correctly, please read this manual care- fully. The instructions detail installation guides, safety in- structions, product descriptions and maintenance, and other information.

If you need additional help and information, please con- tact our customer service or add an official WeChat ac- count for consultation. When using, please follow the in- structions of this instruction. Children must use this product with their guardians.

ITEM DETAIL INFORMATION:

  • Product name: COOGHI Multifunctional Toddler Tricycle
  • Product weight: 4.4KG
  • Maximum load: 25KG
  • Quantity: 1 set
  • Product inspection: qualified
  • Executive standard: ASTM-F963
  • Product size: 660 X 443 X 520mm
  • Applicable age: 18 months-4 years old
  • Product model: CG-TROIL CG-TR01P

WARNING

  1. When children are sitting in the stroller, the caregiver should not leave!
  2. Children need to use this product correctly under the supervision and guidance of adults.
  3. The applicable age for this car is 18 months-4 years old.
  4. The maximum load of this vehicle is 25kg.
  5. This car must be assembled by an adult.
  6. When children use it, they need to wear shoes, protective gear, helmets, and other protective equipment.
  7. It is strictly forbidden to use this product in dangerous places like rugged sites, streets, roads, slopes, swimming pools, etc. Otherwise, it may cause traffic accidents or risk drowning.
  8. Before each use, check the safety of the car platform and pay attention to the regular operation of the locking mechanism.
  9. Overloading or incorrect use and the use of faulty parts may cause damage to the car platform or be unsafe.
  10. If the cart is unstable or damaged, please stop using it immediately.
  11. Users and guardians, please read this manual carefully before use, and please keep it for future reference. If this manual does not use, it may affect the safety of children.
  12. Do not hang anything on the cart’s handlebar to not affect the cart’s stability.
  13. Do not approach the fire source during use.
  14. The recommended torque for the fasteners of this vehicle is more than 8kgf.cm and less than 16kgf·cm.
  15. To avoid suffocation, keep the plastic covering away from the baby.

DETAIL PARTS

DETAIL PARTS

SPECIAL NOTE

  1. The illustrations used in this manual are to illustrate the operation method and use structure. Please refer to the actual product and the figure when there is a slight difference between the actual product.
  2. To optimize the product, we may change part of the appearance and structure without further notice, please understand.

FUNCTION INTRODUCTION

Pattern one
Trike Mode
Pattern two Stroller Mode Applicable age: 2-4 years old
FUNCTION INTRODUCTION

Pattern two
strollar Mode
Applicable uge 18months-4 years
FUNCTION INTRODUCTION

Pattern three
Walker Mode
Applicable age 2-4 years old
FUNCTION INTRODUCTION

Pattern four
The seat plate is adjustable
Applicable age 18months-4 years old
FUNCTION INTRODUCTION

INSTALLATION STEPS

  1. Take out the whole body of the trike from the box.
    INSTALLATION STEPS

  2. Adjust the seat plate switch to the bottom in the direction of the arrow.
    Slide the seat plate to the proper position.
    Reset the seat plate switch.
    INSTALLATION STEPS

  3. Pull the left/right rear fork fixed switch to the end in the direction of the arrow, and open the left and right rear forks simultaneously, then reset the left and right rear fork fixed switches.
    INSTALLATION STEPSINSTALLATION
STEPS

  4. Pull the rear wheel rotation button to the end with one hand in the direction of the arrow while the other hand rotates the left/right rear wheel outwards, release the rear wheel rotation button, and hear a click of the button click into place, done.
    INSTALLATION STEPS

  5. Please press the lower metal button on the T-bar while you insert it into the hole(no lower than the warnning line). When a “da” sound is heard, the set is finished.
    INSTALLATION STEPS

  6. Press and hold the front fork pedal button, and then insert the pedal vertically into the front fork hole in the direction of the arrow, and then snap it to the first gear.
    INSTALLATION STEPS

Step 1
Lock the pedal (Optional). Press the button on the bottom of the front fork, pull out the pedal and adjust to the second gear,

Step 2
Assemble the push bar: Align the push rod buckle with the rear wing hole opening and insert it, then it will be converted into baby walking mode
INSTALLATION STEPS

WALKER INSTALLATION METHOD: SWITCH BETWEEN TRICYCLE MODE AND WALKER MODE

  1. Pull the rear wheel rotation button to the end with one hand in the direction of the arrow while the other hand rotates the left/right rear wheel outwards. Release the rear wheel rota- tion button at the same time. Hear the button click with a click. That’s it.

  2. Pull the left/right rear fork fixed switch to the end in the direction of the arrow, and after pulling the left/right rear fork close together, reset the left and right rear fork fixed switch.

  3. Remove the pedals and place them in the pedal storage box, and then take out the U-shaped iron of the left/right rear fork.

  4. Insert the left/right rear fork U-shaped iron into the left/right rear fork hole according to the direction of the arrow, and confirm that it is fastened.

MAINTENANCE

To ensure the standard and safe use of this product and protect children from accidental injury, please check and maintain the car frequently.

  1. All rotating parts need to be lubricated with solid grease regularly to prolong the product’s service life.
  2.  Avoid long-term use or storage in a humid, cold, or high-temperature environment.
  3. Regularly check whether any screws are loose and parts are damaged.
  4. When installing and using all parts, please check whether they are in good condition.
  5. Please clean the product regularly. Do not clean the metal parts with water. They should be wiped with a soft, damp cloth.

MAINTAIN

  1. Maintenance-Regularly check the tightening of all screws and the condition of the wheels and replace them if necessary. After each use, clean it with a soft, damp cloth and perform a visual inspection.
  2. Warranty limitation-for material and manufacturing defects, use the minimum warranty regulations of the relevant country. During the warranty period, COOGHI decides whether to repair or exchange the product. The warranty is not responsible for damage caused by improper use for example, improper assembly, operating errors, or abnormal wear.
  3. Warranty application-a valid purchase certificate is required to guarantee the warranty. Please keep the warranty card in a safe place. In a contract, COOGHI and the dealer jointly decide whether to repair it or exchange it for a new product. Step
  4. Insert the left/right rear fork U-shaped iron into the left/right rear fork hole according to the direction of the arrow, and confirm that it is fastened.

Brand Owner
Shenzhen COOGHI Furikids Technology Co., Ltd. Brand

Address Room
201, Building A, No. 1, Gianwan 1st Road, Qianhai Shen- zhen-Hong Kong Cooperation Zone, Shenzhen (located in Shenzhen Qianhai Commercial Secretary Co., Ltd.)

After-sales phone
400-7842-800

Manufacturer/manufacturer
Zhongshan Fengshuo Daily Products Co., Ltd.

Manufacturer Address
1st and 4th Floors, Building 5, No. 10 Yimin Street, East District, Xloolan Town, Zhongshan City, Guangdong Province

Factory Address
First Floor and Second Floor, Building 5, No. 10 Yimin Street, East Dis- trict, Xiaolan Town, Zhongshan City, Guangdong Province

Thank you for choosing COOGHI Muli-Purpose Toddler Tricycle Thank you.

COOGHI Logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals