Dakotamicro DMOV-4DTM Camera Adapter Cable User Manual
- June 5, 2024
- Dakotamicro
Table of Contents
Dakotamicro DMOV-4DTM Camera Adapter Cable
Installation Guide for OverView
-
Dakota Micro PN: DMOV-4DTM
-
The adapter cable is 15 Inches long.
-
This adapter cable is compatible with the Bobcat R Series monitor.
-
This adapter cable allows for the input of one (1) OverView CVBS (Analog) camera into the Deutsch DTM06-4S.
-
The DMOV-4DTM has one (1) video input which allows the use of one (1) camera.
-
The adapter cable looks like this:
-
To locate the camera inputs, open the back tailgate of the skid steer and it is at the top of the opening. See your equipment’s user manual for exact location of camera connection ports.
-
This adapter cable can ONLY be used with NTSC OverView CVBS (Analog) cameras.
NOTE: Check the equipment’s user manual for the video capabilities (AHD or CVBS) with the display. -
Warranty on this item is 1 year from date of purchase.
CONSUMER LIMITED WARRANTY
Subject to the disclaimer, limitations and other directions stated hereafter,
Dakota Micro, Inc. warrants that the Product will be
free from defects in material and workmanship for periods as stated hereafter
from the date of original purchase. THIS
WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS. THE EXCLUSIVE REMEDY OF THE BUYER IS
LIMITED TO REPAIR OR
REPLACEMENT OF THE PRODUCT. EXCEPT AS STATED IN THIS WARRANTY, DAKOTA MICRO
SHALL NOT BE LIABLE FOR ANY
LOSS, INCONVENIENCE, OR DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, RESULTING
FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER RESULTING FROM BREACH OF
WARRANTY, NEGLIGENCE, STRICT
LIABILITY OF ANY OTHER LEGAL THEORY. Any oral statements or representations
made by anyone which are contrary to or at variance with the terms stated in
this LIMITED WARRANTY are void.
Dakota Micro will, at its option, either repair the defect or replace the
defective Product or part thereof with a new or remanufactured equivalent at
no charge to the purchaser for parts or labor for the period of three (3)
years for AgCam® /EnduraCam® and InnoPro® cameras; two (2) years for AgCam®/
EnduraCam® monitors, and Wireless components; Twelve (12) Months for all
Overview Cameras & Monitors, cables and all other accessories.
The Dakota Micro limited warranty periods outlined above apply throughout the
United States and Canada only. A one (1) year maximum limited warranty for all
Products applies to all other geographic locations unless otherwise stated in
writing by Dakota Micro.
This limited warranty does not apply to any issues connected with appearance
that have no relation to the performance of the Product nor to any Product the
exterior of which has been damaged or defaced, which has been subjected to
improper voltage or other misuse, abnormal service or handling, or which has
been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth in the complete Dakota Micro “Warranty & Repair Policy” available on our website at www.dakotamicro.com
Neither the sales personnel of Dakota Micro nor any dealer or any other person
is authorized to make any warranties other than those described herein, or to
extend the duration of any warranties beyond the time periods described
herein.
The warranties described herein shall be the sole and exclusive warranties and
remedies provided by Dakota Micro. Correction of
defects, in the manner and for the period of time described herein, shall
constitute complete fulfillment of all liabilities and responsibilities of
Dakota Micro to the purchaser with respect to the Product, and shall
constitute full satisfaction of all claims. In no event shall Dakota Micro be
liable or in any way responsible for any damages or defects in the Product
which were caused by repairs or attempted repairs performed by anyone other
than Dakota Micro.
Some states do not allow the limitation or exclusion of incidental or
consequential damages, so said limitation may not apply to you.
Any action at law, suit in equity, or other judicial proceedings for the
enforcement of any right provided for herein or otherwise, or with respect to
any claim that a purchaser may have against Dakota Micro shall be instituted
only in the Courts of the State of North Dakota, either in the state district
court located in Wahpeton, North Dakota or in Federal District Court location
in Fargo, North Dakota. Without regard to conflicts of law principles, the
laws of the state of North Dakota shall govern the interpretation and
enforcement of the terms of this Limited Warranty and all aspects of the
relationship between Dakota Micro and the purchaser.
This warranty gives you specific legal rights and you may also have other rights, which may vary from state to state.
8659 148½ Ave. SE.
Cayuga, ND 58013
Management System Registered to ISO 9001
www.dakotamicro.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>