bESTRON ACH1800DZR Zwart 900W Ceramic Fan Heater Instruction Manual
- June 4, 2024
- bESTRON
Table of Contents
ACH1800DZR Zwart 900W Ceramic Fan Heater
Instruction Manual
ACH1800DZR Zwart 900W Ceramic Fan Heater
This product is only suitable for well-insulated spaces or occasional use
| Anti-frost
---|---
| Ventilation
| Warm
| Hot
SAFETY INSTRUCTIONS
- In the unlikely event that the device should become defective, never try to carry out the repair yourself. Always have repairs carried out by a qualified technician.
- This appliance should not be used by children younger than 8 years old and persons with reduced physical, sensory or mental capacity or lack of experience or knowledge.
- Children are not allowed to clean and maintain the appliance, except if they are over the age of 8 years old and supervised.
- Keep the appliance and the cable out of reach of children under the age of 8 years old.
- Children must be supervised to ensure that they do not play with the appliance.
- Always place electrical appliances on a stable and flat, heat-resistant surface, in a place where they cannot fall.
- Do not allow electrical devices, cables, or plugs to come into contact with water, other liquids, or other heat sources.
- The appliance must not be operated by means of an external timer switch, or by a separate system with remote control.
- Certain parts of an electrical appliance may become warm or sometimes hot. Only hold the handle when replacing the appliance.
- Do not insert objects through the grille.
- Use the appliance only in a vertical position.
- Do not place the fan heater directly beneath the wall socket or on the deep-ply carpet.
ENVIRONMENT
Dispose of packaging materials such as plastic and boxes in the appropriate containers.
- Do not hand this product in as normal household waste at the end of its life cycle, but hand it in at a collection point for reuse of electrical and electronic equipment. Look for the symbol on the product, instructions for use, or packaging.
- The materials can be reused as indicated. By helping with the reuse, recycling of materials, or other forms of use of old equipment, you are making an important contribution to protecting the environment
- Ask the municipality for the correct collection point in your area.
OPERATION
The appliance is intended only for domestic use, not for professional use.
The following description is associated with image 1 on page 2:
1. Display
2. Touch panel
A. Power button
B. Function button
– Anti-frost
– Ventilation
– Warm (900W)
– Hot (1800W)
C. Shutdown timer
D. Eco mode| E. Swing function
F. Reduce temperature/time
G. Increase temperature/time
3. Integrated handle
4. Air outlet
5. Air inlet
6. On/Off button
7. Plug cable
8. Base
9. Remote control
---|---
Unpack the device and remove all packaging parts.
PLEASE NOTE:
- Do not cover the appliance to avoid overheating.
- Do not use this appliance in the immediate vicinity of a bath, shower, or swimming pool.
- Under the base is tip-over protection that ensures automatically switching off as soon as the appliance falls over or is not properly or sable on the surface.
Switching on the appliance
Place the appliance on a stable surface and make sure that the air inlet (5)
and the air outlet (4) are clear.
Insert plug (7) into the socket. Switch on the On/Off button (6) on the back
of the appliance. A short signal sounds and the pilot light in the display (1)
starts flashing. Press the Power button (A).
Anti-Frost function
The appliance starts automatically in the Anti-Frost mode. This function keeps
the temperature at 7° Celsius.
Select function
Make sure the appliance is operating. Use button B to select a function. See
page 2.
PLEASE NOTE:
You cannot set a temperature when the appliance is in ventilation mode. After
all, the appliance only ventilates. Any attempt to do so will stop the
ventilation. You must then manually switch to ventilation mode again.
Set temperature
Make sure the appliance is operating in warm or hot mode. Use the F and G keys
to set the temperature.
Shutdown timer
Make sure the appliance is operating. Select a function. Set the temperature.
Use the C button (the display starts flashing) and then the F and G buttons to
set the switch-off time (0 to 24 hours). After approx. 5 seconds, the set
temperature becomes visible again. The appliance switches off automatically
after the set time.
Eco mode
By switching on the Eco mode (D), the appliance determines which heating mode
is needed to approach and maintain the set temperature as closely as possible.
Swing function
Switch on the swing function with button E. Press again to switch off the
swing function.
CLEANING AND MAINTENANCE
- Unplug the appliance and let the appliance cool down.
- Clean the outside of the housing with a damp cloth.
- Wipe the housing dry with a soft cloth.
PLEASE NOTE:
- Do not use aggressive or abrasive cleaning agents or sharp objects (such as knives or hard brushes) when cleaning.
ALL YOU WANT TO KNOW ABOUT
YOUR UNIQUE 5-YEAR WARRANTY
NEEDS HELP.? CHAT WITH US!
WHATSAPP CUSTOMER SERVICE
http://www.bestron.com/whatsapp
BESTRON.COM/WHATSAPP
v210907-02
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>