SEHLORAN Double Drawer Dresser for Bedroom with 7 Drawers Instruction Manual

SEHLORAN Double Drawer Dresser for Bedroom with 7 Drawers Instruction Manual

Package Contents

• A1 x 4
  Left/Right bottom tube

• B1 x 2
  Middle bottom tube

• A2 x 2
  Left middle tube

• B2 x 2
  Middle tube

• A3 x 1
  Left top frame

• A4 x 1
  Right top frame

• B3 x 1
  Middle top frame

• C x 4
  Tube

• D1 x 1
  Long wood shelf

• D2 x 1
  Short wood shelf

• E1 x 7
  Drawer bottom

• E2 x 7
  Drawer

• F x 10
  Connecter

• G x 6
  Leveling feet

• H x 12
  Short bolt

• I x 4
  Long bolt

• J x 3
  Screw

• K x 3
  Anchor

• L x 1
  Wrench

• M x 1
  X-frame
  

• N x 2
  Double-threaded bolt

• O x 7
  Left slide

• P x 7
  Right slide

WARNING

The product picture below is just for tube and frame’s position reference only, but missing important details. Do read the following steps for details to avoid mistakes and re-work.

Assembly Instructions

Step 1
Using connecter “F” to connect frame “A1” & “A2 & “A3”.
Punch tight gradually by plastic hammer (not provided), until “A1” & “A2” & “A3” connect firmly.

NOTICE!
Make sure the gourd hole heads up as above.

Step 2
Using connecter “F” to connect frame “B1” & “B2” & “B3”.
Punch tight gradually by plastic hammer (not provided), until “B1” & “B2” & “B3” connect firmly.

NOTICE!
Make sure the gourd hole heads up as above, and small round hole in correct position as above.

Step 3
Using short bolt “H” to attach X frame “M” to “A2” “A3” & “B2” “B3″, tighten with wrench”L”.

Step 4
Using double-threaded bolt “N” & bolt “I” to attach tube “C” to “A1” & “B1”,
Using bolt “H” to attach “B3” & “A3” to top shelf “D1″, tighten with wrench”L”.

Step 5
Using connecter “F” to connect frame “A1” & “A4”.
Punch tight gradually by plastic hammer (not provided), until “A1” & “A4” connect firmly

Step 6
Using bolt “I” and double-threaded bolt “N” to attach tube “C” to “A1” & “B1″, then using bolt”H” to attach “B3″& A4” to top shelf “D2″.tighten with wrench”L”.

Step 7
Screw the leveling feet “G” as shown

Step 8
Assemble the slide “O” & “P” into the frame as shown.

Step 9
Using “J” & “K” to attach the whole frame to the wall as shown.

Caution!
The product must be secured to the wall.

Step 10
Put drawer bottom “E1” into drawer “E2”, and place drawer into the the frame

Step 11
Completed

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>