Bestway 58234 Aquaclean Pool Cleaning Kit Owner’s Manual
- June 16, 2024
- Bestway
Table of Contents
**Bestway 58234 Aquaclean Pool Cleaning Kit Owner’s Manual
**
TECHNICAL SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS. READ AND FOLLOW ALL INSTRUCTIONS.
WARNING: To reduce the risk of injury, do not permit children to use this
product.
WARNING: Only adults should assemble and disassemble this product.
WARNING: Do not use the filter pump/sand filter while the pool is
occupied.
WARNING: To avoid severe risk of injury or death, ensure the filter
pump/sand filter is unplugged before any maintenance begins.
NOTE: Remove the product from the pool before placing a cover over the
pool.
NOTE: Please examine and verify all components are present before use. If
parts are missing, return to the purchase point to claim the missing parts.
SAVE THESE INSTRUCTIONS
SPECIFICATION
Filter Pump/Sand Filter Compatibility : 2,006 L/h (530 gal./h) flow rate
and above
Pool Compatibility : For use with all above ground pool
NOTE: Drawings for illustration purpose only. May not reflect actual
product. Not to scale.
IMPORTANT: Place the vacuum into the water and fill the vacuum hose with
water in order to remove all the air. Follow the 3 steps in step 4; use the
vacuum only when the hose is full of water.
NOTE: We supply a Hose Adapter for your use. If there are two outlet
valves on your pool, please block one of them.
POOL VACUUM OPERATION
-
Use the provided owner’s manual to set up the filter pump/sand filter. Turn on the filter pump/sand filter to activate the pool vacuum.
NOTE: If there isn’t any water flowing into the filter pump/sand filter, please unplug the pump, open the Air Release Valve/transparent cover of the strainer to release the air from the filter pump/sand filter. When water starts to flow out, close the Air Release Valve/transparent cover of the strainer and restart the pump. -
When finished, unplug the filter pump/sand filter and remove any debris from the debris bag and filter cartridge.
NOTE: Never use your pool vacuum without the debris bag; failure to do so may clog yourfilter pump/sand filter. Make sure to empty the debris bag regularly to ensure the maximum suction possible.
STORAGE
- Disassemble the product.
- Clean and dry all the parts thoroughly.
- Store in a warm, dry place.
PACKAGE CONTENT
INSTALLATION INSTRUCTION
