DOOHOEEK T10 Wireless Helmet Headphones User Manual

DOOHOEEK T10 Wireless Helmet Headphones

Thank you for purchasing from Doohoeek.

Package List

• Headphones x 1
• Charging Case x 1
• Type-C Charging Cable × 1
• User Manual x 1

1. Digital LED Battery Status
2. Indicators
3. MFB (Multifunction Button)

Specifications

Power ON/OFF

Note: In pairing mode, if there is no connection for more than 5 minutes or the battery voltage is less than 3.1V, the headphones will automatically shut down.

Pairing Instructions

1. Take out the two headphones and turn them on with a “power on” sound;
2. The indicator flashes rapidly in alternating red and blue with a “pairing” voice;
3. Open the Bluetooth of the phone or tablet and then search and click Bluetooth “T10
4. Once the earphone prompts “Connected” indicating successful connection and is ready for use.
5. The headphones have an automatic reconnection function. When the headphones are turned on again, they will automatically connect to the device.
6. After successful connection, please place the headphones inside the helmet (NOTE: please distinguish between the left and right earphones)

How to place the headphones inside the helmet

1. Place the earphones into the slots inside your helmet liner.
2. Listen to music, make calls and more while snowboarding and skiing.

MFB (Multifunction Button) Instructions

Sound Notifications

Indicators

Troubleshooting

1.  The phone cannot find the headphones:

Possible reasons:

1. The headphones are not turned on and under standby mode;
2. Headphone program error;
3. Phone program error.

Solution:

1. Put the earphones into the charging case and close the case; then open the case and take the earphones out (the red and blue indicator lights flash alternately) to enter the pairing mode;
2. Please clear the pairing record of the earphones.
3. Restart the phone and clear all pairing data in the phone’s Bluetooth No sound from headphones:

Possible reasons:

1. Improper phone volume;
2. The headphones are not properly connected to the phone;
3. The headphones are out of operating range. Solution:
4. Adjust the phone volume;
5. Reconnect the headphones;
6. Keep the earphones and phone within a range of 10m.

Precautions:

1. Do not perform any other actions while searching Bluetooth.
2. Please use headphones near your phone to ensure signal stability.
3. The red indicator light does not light up during

charging Possible reasons:
The headphones have not been used for a long time.
Solution:
Charge the headphones for 30 minutes and the red indicator will light up.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>