Empava BR01S Beverage Refrigerator Cooler User Manual

Empava BR01S Beverage Refrigerator Cooler User Manual

ASSMBLE INSTRUCTION

Thank you for choosing our product. If operated and taken care of properly IN accordance with these instructions, this appliance will be useful for many years.

Before First Use

• Before first use, remove any stickers or similar from the appliance except for threating label.
• Dispose of any plastic bags as they pose a risk of suffocation to young children.
• Please read this manual before operating the appliance and keep it in a safe place for
  future reference. If this appliance is transferred to a new owner, the manual should also be provided to the new owner. If you ignore the safety instructions, you will
  endanger your health and life.

Important Safety Measures and Instructions

• Before operating the appliance, check if the voltage indicated on the appliance’ technical plate corresponds to the voltage of the electricity supplied to your home.

• Check the technical periphery of the appliance. Do all wires and connections to the appliance work properly? Or are they time-worn and do not match the technical
  requirements of the appliance? A check-up of existing and newly made connections must be done by an authorized professional. All connections and energy-leading components (incl. wires inside a wall) must be checked by a qualified professional.

• All modifications to the electrical mains to enable the installation of the appliance must be performed by a qualified professional.

• This appliance is intended for private use only.

• This appliance is intended for cooling wine in a private household only.

• This appliance is for indoor use only.

• This appliance is not intended to be operated for commercial purposes, during camping or in public transport.

• Operate the appliance in accordance with its intended use only.

• Do not allow anybody who is not familiar with this instruction manual to operate the appliance.

• This appliance may be operated by children aged from 8 years and above as well asby persons with reduced physical, sensory and mental capabilities or lack of
  experience and knowledge if they are supervised or have been instructed concerning the safe use of the appliance and do comprehend the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children unless they are supervised.

• Ambient temperature below 10°C or above 32°C will hinder the performance of the appliance.

Warning and Cautions

• Do not connect the appliance to the mains if the appliance itself or the power cordon
  the plug are visibly damaged.

• Never try to repair the appliance yourself. If the appliance does not operate properly, please contact the shop you purchased the appliance at. Original spare parts should be used only.

• When the power cord is damaged, it must be replaced by the manufacturer or unauthorized after sales service or a qualified professional only.

• If any part of the cooling circuit is damaged, the appliance must not stand near afire, naked light or spark-generating devices. Contact the shop you purchased the appliance at immediately.  Keep all components of the appliance away from fire and other sources of ignition when you dispose of or decommission the appliance.

• Do not install the appliance near volatile or combustible materials (e.g. gas, fuel, alcohol, paints) or in rooms which may have poor air circulation (e.g. garage)

EXPLOSION HAZARD
Do not store any explosive materials or sprays that contain flammable propellants in your appliance.

• Do not connect the appliance to the electric supply unless all packaging and transit
  protectors have been removed.

• Operate the appliance with 110–120V AC 60Hz only. All connections and energy-leading components must be replaced by an authorized professional.

• Do not use a socket board or a multi socket when connecting the appliance to the mains.

• A dedicated and properly grounded socket meeting the data of the plug is required to minimize any kind of hazard. The appliance must be grounded properly.

• Check that the power cord is not placed under the appliance or damaged when moving the appliance.

• The technical data of your energy supplier must meet the data on the model plate of
  the appliance.

• Your domestic circuit must be equipped with an automatic circuit breaker.

• Do not modify the appliance.

RISK OF ELECTRIC SHOCK
Turn off the power before you install the appliance and before you connect it to the mains. Do not
use any steam cleaners to clean or defrost the appliance. The steam can get into contact with theelectrical parts and cause an electrical short. Never use mechanical devices, knives or other sharp- edged items to  remove encrusted ice inside the appliance.

• Disconnect the appliance from the mains before you clean or maintain it.

• Do not use any electric appliances inside the food storage compartments of your
  appliance unless they are recommended by the manufacturer of your refrigerator.

• Do not put any heat-radiating appliances onto your appliance.

• Do not install the appliance in a place where it may come in contact ditchwater/rain, otherwise the insulation of the electrical system will be damaged.

• Do not put a water-boiler or vases onto your appliance. The electrical components of your appliance can be seriously damaged by water over- boiling or spilled water.

• Children must never play with the appliance.

• If you decommission your appliance (even temporarily), ensure that children cannot get into the appliance.

• Do not touch the extremely cooled surfaces with wet or damp hands, because your skin may stick on these surfaces.

• When you move the appliance, hold it at its base and lift it carefully. Keep the appliance in an upright position.

• Never use the door for moving the appliance as you will damage the hinges.

• Do not operate the appliance unless all components are installed properly.

• Do not stand or lean on the base, the drawers, the doors etc of the appliance.  Do not put hot liquids or hot foodstuff into the appliance.

Specifications

0.492 Kw.h/24h
TEMPERATURE RANGE| 38-50℉ (3-10℃)| 38-50℉ (3-10℃)| Left zone:40- 66℉ (5-18℃) Right zone:38-50℉ ( 3 -10 ℃)| Left zone:40- 66℉ (5-18℃) Right zone:38-50℉ ( 3 -10 ℃)
NET WEIGHT| 71.7 lbs| 99.2lbs| 107.5 lbs| 134.5 lbs
PRODUCT DIMENSION| W14.8 x H 33.9 x D 22.4 inches| W23.4 x H 33 x D 22.4 inches| W 23.4 x H33.9 x D 22.4 inches| W 29.8 xH33.9 x D 22.4 inches

Device Overview

Model No.: EMPV-BR01S

Model No. : EMPV-BR02S

Model No. : EMPV-BR03D

1. Left light switch| 2. Left temperature setting| 3. left temperature display| 4.Left temperature setting
---|---|---|---
5. Left upper hinge| 6. Power switch| 7. Left fan| 8. Left light
9. Exhaust window| 10. Door frame| 11. Left glass| 12. Left door seal
13. NTC point| 14. Shelf| 15. Carbon filter| 16. Exhaust window
17. Foot| 18. Lock| 19. Right light switch| 20.Right temperature setting
21..Right temperature display| 22. Right temperature setting| 23 . Right upper hinge| 24 . Right fan
25 . Right light| 26 Door frame| 27 Right glass| 28 Right door seal
29 . Lock| | |

Model No.: EMPV-BR04D

1. Left light switch| 2. Left temperature setting| 3. left temperature display| 4.Left temperature setting
---|---|---|---
5. Left upper hinge| 6. Power switch| 7. Left fan| 8. Left light
9. Exhaust window| 10. Door frame| 11. Left glass| 12. Left door seal
13. NTC point| 14. Shelf| 15. Carbon filter| 16. Lock catch
17. Exhaust window| 18. Foot| 19. Lock| 20. Right light switch
21.. Right temperature setting| 22.Right temperature display| 23 . Right temperature setting| 24 . Right upper hinge
25 . Right fan| 26 Right light| 27 Door frame| 28 Right glass
29 . Right door seal| 30. Lock catch| |

Before Initial Operation

• Leave the appliance in an upright position for 4–6 hours before you connect it to the mains.  Clean the appliance thoroughly. Be very careful, especially inside the appliance (seechapter Cleaning and Maintenance).
• The appliance must be connected to the mains properly.
• Allow the appliance to stabilize the temperature for approx. 24 h before use.
• Do not overfill the appliance. 12
• Power cord direction as below showed, the length is 1.8m.

Temperature Setting

Model No: EMPV-BR01S / EMPV-BR02S

• Temperature range: 38-50℉（3-10℃）.
• Flashing LED = Setting mode of the temperature.
• Constant LED = Cooling temperature.

Model No: EMPV-BR01S / EMPV-BR02S

• Temperature range: 38-50℉（3-10℃）.
• Flashing LED = Setting mode of the temperature.
• Constant LED = Cooling temperature.

Model No: EMPV-BR03D / EMPV-BR04D

• Temperature range: Left Zone:40-66℉（5-18℃）;Right Zone:38-50℉（ 3-10℃）
• Flashing LED = Setting mode of the temperature.
• Constant LED = Cooling temperature.

Memory function: when the power suddently cut off, the setting temperature will
b e memories what you set last time.
A uto- defrost function: the compressor will b e stopped working for half hour when it work s for 6 hours continuously.

The appliance can only reach the relevant temperatures when:

1. The ambient temperature meets the climatic class.
2. The doors close properly.
3.  You do not open the doors too often or too long.
4.  The door seals are in proper condition.
5.  The appliance is properly positioned.
6. You have not overfilled the appliance.
7. You do not store warm or hot food in the appliance.

Energy Saving

• Try opening the door as little as possible, especially when the weather is warmandhumid. When you open the door, close it as soon as possible.
• Make sure the appliance is always well-ventilated.
• Disconnect the appliance from the mains if you do not operate it.
• Always keep the door seals clean and in a proper condition.

Cleaning and Maintenance

• Always keep the appliance clean so that unpleasant odors do not occur.
• Dust deposits on the condenser will increase the energy consumption. Clean the condenser twice a year with a vacuum cleaner or a soft brush.
• Take off all rings and bracelets before cleaning or maintaining the appliance, otherwise you may damage the surface of the appliance.

Detergent

• Do not use any harsh, abrasive detergents.
• Do not use any aggressive detergents.
• Do not use any solvents.

External Cleaning

• Use a moist cloth and a mild, non-acid detergent.
• Use clear water to rinse.
• Try the cleaned surfaces with a cloth.

Internal Cleaning

• Clean the shelves and the other removable parts with warm water and a mild, non-acid detergent.
• Use clear water to rinse.
• Dry the cleaned surfaces with a cloth.
• Clean the interior with water and a mild, non-acid detergent.
• Use clear water to rinse.
• Dry the cleaned surfaces with a cloth.
• Check the water drain and clean it if needed.

How to Move the Appliance

• Remove all bottles.
• Securely tape down all loose items inside the appliance.
• Turn the level feet up to the base to avoid damage.
• Tape the door.
• The appliance must be moved in an upright position.

Installation

view (1)

• To install the door handle:
  For the shipment, the door handle has been stored inside of the binding to the wood shelves. To install the handle, the door gasket should be gently pulled back where the crew holes for the handle, then the handle should be attached by screwing with the twos crews which are packed in the box with this instruction manual and other spare parts.
  

• To reverse the door swing:
  As you received your wine cooler, the door swings open at the leftie you wish to reverse
  the swing so that the door opens from the right,it is most important too have at least one
  other person to help. It is very dangerous to try to reverse the door swing by
  yours lf, without anybody’s help the door might fall and glass might be broken, which is
  terribly dangerous.

• Suggest Cabinet Dimension:
  
  EMPV-BR01S
  
  EMPV-BR02S
  
  EMPV-BR03D
  
  EMPV-BR04D
  
  

• Spare Parts Details:
  ** Spare Parts| Pictures| Use
  ---|---|---
  Upper HingeEMPV-BR01S EMPV-BR02S| **| To switch the door open from right.
  Bottom HingeEMPV-BR01S EMPV-BR02S| | To switch the door open from tight.
  Screw x 2 EMPV-BR01S EMPV-BR02SEMPV-BR03D EMPV-BR04D| | For the handle installation.
  Gasket x 2 EMPV-BR01S EMPV-BR02S EMPV-BR03D EMPV-BR04D| **| For the handle installation.
  Key x 2 EMPV-BR01S EMPV-BR02SEMPV-BR03DEMPV-BR04D| | To lock the door.
  Big rubber plug x 1EMPV-BR01S EMPV-BR02S EMPV-BR03D EMPV-BR04D| **| To cover the hole on the left front corner of the body.
  Round rubber plugEMPV-BR01S EMPV-BR02S| | To cover the holes on the left front corner of the body.

Trouble Shooting

corresponding socket by connecting it with another appliance.
The plug has become loose.| Check the fuse box.
•    The socket is not supplied with energy.•    The fuse is switched off.• The voltage is too low.| Compare the data on the model plate with the data of your energy supplier.
The door was frequently opened.| Close the door properly.
The door is not properly closed.| Do not overfill.
•    The appliance is overfilled. The door seals are damaged.| Replace the seal.
•    Main control board is defective.•    PCB is defective.•    Plug is defective.| Contact the service.
•    LED is defective.•    Temperature cannot be determined.| Contact the service.
The appliance is not installed on a level, dry, solid floor.| Realign the appliance. Readjust the appliance.
The appliance is in contact with a wall or another item. The bottles are incorrectly positioned.| Realign the bottles.
Some items have dropped behind the appliance.| Remove these items.
The appliance is not installed on a level, dry, solid floor.| Realign the appliance.
Door seal is defective.| Replace the door seal.
Shelves are not inserted properly.| Insert the shelves properly.
Control panel is defective.| Contact the service.

Decommission

• If the appliance is not used for a longer period of time:

1. Draw the plug out of the socket.
2.  Remove all food stored in the appliance.
3. Dry the inside of the appliance with a cloth and leave the door open for a fewdays.

• While away on an average vacation/holiday (14–21 days):

1. Do the same as described above, or do not let the appliance operate.
2. Remove all perishable food from the cooling compartment.
3.  Clean the cooling compartment.
4. Freeze all food which is suitable to be frozen.

• If you want to move the appliance:

1. Secure all removable parts and the contents of the appliance. Pack the mseparatelyif necessary.
2. Transport the appliance in an upright position only. All other positions can causedamage to the compressor.
3. Do not damage the feet of the appliance.

Electrical Circuit Diagram

Model No.: EMPV-BR01S

Model No.: EMPV-BR02S

Model No.: EMPV-BR03D

Model No.: EMPV-BR04D

References

• EMPAVA Household Appliances Limited

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>