PRINCESS 312295 Cordless Warming Tray Instructions
- June 16, 2024
- Princess
Table of Contents
PRINCESS 312295 Cordless Warming Tray
Product Information
Specifications
- Model: TYPE 312295 / 312296 / 312297
- Product: Cordless Warming Tray (XL / XXL)
- Power Source: Cordless
- Warm-up Time: 8 minutes
- Heat Retention Time: 60 minutes (after cord removal)
- Features:
- Automatic temperature control
- Indicator lights
- Overheating protection
- Removable cord
Product Usage Instructions
1. Power Connection
Connect the provided cord to the Warming Tray and plug it into a grounded electrical outlet. The red indicator light will be on as long as the Warming Tray is connected to the power supply.
2. Warm-up Process
The Warming Tray will take approximately 8 minutes to reach its maximum temperature. Once the temperature is reached, the heating will be automatically turned off, and the green indicator light will turn on. If the device cools down, the thermostat will automatically turn on again if the Warming Tray is still connected to the power supply. This ensures protection against overheating at all times.
3. Cordless Operation
The removable cord allows you to place the Warming Tray anywhere independently of the power supply. The Warming Tray will continue to emit heat for an additional hour.
4. Placement and Dish Selection
Make sure the Warming Tray is placed on a flat and sturdy surface before placing dishes on it. It is recommended to use dishes with a flat bottom and low sides for better heat retention. High sides can cause significant heat loss. Covering the dishes will help them stay warm for a longer period.
Cleaning Instructions
- Always unplug the Warming Tray before cleaning.
- Allow the tray to cool down before cleaning.
- Do not immerse the device in water or any other liquid.
- Use a soft damp cloth followed by a dry cloth for cleaning.
- Avoid using abrasive substances, bleaching agents, or alcohol for cleaning.
Frequently Asked Questions
Q: How long does it take for the Warming Tray to reach its maximum temperature?
A: The Warming Tray takes approximately 8 minutes to reach its maximum temperature.
Q: How long does the Warming Tray retain heat after removing the cord?
A: The Warming Tray will continue to emit heat for 60 minutes after removing the cord.
Q: Can I use dishes with high sides on the Warming Tray?
A: It is recommended to use dishes with a flat bottom and low sides to minimize heat loss. Dishes with high sides may result in significant heat loss.
The PRINCESS CORDLESS WARMING TRAY is a special hotplate requiring only 8 minutes to reach the required temperature. The tray then stays warm (after unplugging) for 60 minutes. Complete with automatic temperature control, indicator lamp, automatic shut-off and removable cord.
INSTRUCTIONS
Connect the cord supplied to the WARMING TRAY and plug it into the mains. As long as the WARMING TRAY is plugged in, the red indicator lamp will always be on. After switching on, the tray takes around 8 minutes to reach the required temperature setting. Once this temperature is reached, the heating element is switched off and the green indicator lamp comes on. If the appliance cools down, the thermostat switches on automatically, provided the WARMING TRAY is still connected to the mains. This means the applian-ce is protected from overheating at all times. Thanks to the removable cord, the tray can be placed anyw-here, independent of the electric supply. The WARMING TRAY still continues to give off heat for a full 60 minutes. Ensure that the tray is always placed on a flat and sturdy surface before putting food on it. To keep dishes warm, you are advised to use crockery with a flat base and edges which are not too high. This is because the edges can cause heat to be lost. Covering the dishes makes them stay warm even longer.
CLEANING
ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING.
- Ensure the tray is fully cooled before cleaning.
- Never immerse the appliance in water or any other liquid.
- Clean the appliance using first a damp cloth and then a dry cloth.
- Do not use corrosive cleaning products, liquid bleach or alcohol when cleaning the appliance.
PRINCESS TIPS
- Never immerse the appliance in water or any other liquid, as this could cause electrocution.
- Always unplug the appliance when not in use.
- Do not place the appliance near heat sources or inflammable objects.
- Do not use the appliance if the cord is damaged. Send it to our service department to minimise any risk. With this type of appliance, a damaged cord should only be replaced by our service department using special tools.
- Ensure the cord is put away so as to prevent people from tripping over it and to keep it from touching the tray.
- Remember that the use of components that are not recommended by the manufacturer can be dangerous.
- This appliance should only be used for the purpose intended.
- Keep an eye on the WARMING TRAY when it is within reach of children. Remember that it gets hot. Of course be careful yourself, as well.
- Children should be supervised to ensure that they do not play with the appliance.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- The appliance is not intended to be operated by means of an external timer or separate remote-control system.
U.K. WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with the following code:
- BLUE NEUTRAL
- BROWN LIVE
- GREEN/YELLOW EARTH
As the colours of the wire in the mains lead of this appliance may not correspond with the colour mar-kings identifying the terminals on your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red. The wire which is coloured GREEN/YELLOW must be connected to the terminal which is marked with the letter E or and is coloured GREEN or GREEN/YELLOW. If a 13Amp (BS1363) plug is used, a 13Amp (BS1362) fuse must be fitted, or if any other type of plug is used, a 13 Amp fuse must be fitted, either in the plug or adaptor, or on the Distribution Board.
WARNING: THIS APPLIANCE MUST BE EARTHED