AG165 Electric Foot Warmer Instruction Manual
- June 16, 2024
- ag
Table of Contents
AG165 Electric Foot Warmer
Product Information
Model: AG160 Foot Warmer
Control Selections:
- 0 = OFF
- 1 = Low Heat
- 2 = Medium Heat
- 3 = High Heat
Power Supply: 220 – 240V, 50Hz
Product Usage Instructions
Step 1: Control Selection
Select the desired heat level using the control panel:
- 0 = OFF
- 1 = Low Heat
- 2 = Medium Heat
- 3 = High Heat
Step 2: Power Supply
Make sure the foot warmer is connected to a power supply of 220 – 240V, 50Hz.
Step 3: Placing the Foot Warmer
Place the foot warmer on a flat and stable surface, ensuring it is positioned correctly for your feet to rest comfortably.
Step 4: Operating the Foot Warmer
Once the desired heat level is selected and the foot warmer is properly placed, press the power button to activate the heating function. The foot warmer will start warming up and provide a soothing and comfortable experience for your feet.
Step 5: Safety Precautions
To ensure safety during usage, please follow these precautions:
- Avoid using the foot warmer near water or in wet conditions.
- Do not use the foot warmer if it is damaged or shows signs of malfunction.
- Keep the foot warmer away from children and pets.
- Do not cover the foot warmer while in use.
Specifications
- Model: AG160 Foot Warmer
- Control Selections: 0 = OFF, 1 = Low Heat, 2 = Medium Heat, 3 = High Heat
- Power Supply: 220 – 240V, 50Hz
Frequently Asked Questions (FAQ)
-
Q: Can I use the foot warmer in wet conditions?
A: No, it is advised to avoid using the foot warmer near water or in wet conditions to ensure safety. -
Q: What should I do if the foot warmer is damaged?
A: If the foot warmer is damaged or shows signs of malfunction, please refrain from using it and contact customer support for assistance. -
Q: Can I cover the foot warmer while in use?
A: No, it is not recommended to cover the foot warmer while in use to prevent overheating and ensure proper ventilation.
Thank you for purchasing the AG165 Foot Warmer. Please read the entire manual carefully before starting to assemble and/or use this product. Follow the manual thoroughly and keep it for further reference.
IMPORTANT SAFETY INSTRUCTION
-
This foot warmer is intended for private use and it should not be used by institutions, hospitals, or the like.
-
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
-
Children should be supervised to ensure that they do not play with the appliance.
-
This appliance must not be used by persons insensitive to heat and other very vulnerable persons who are unable to react to overheating.
-
Not to be used by very young children (0-3 years). Children under the age of three are not to use this appliance due to their inability to react to overheating.
-
This appliance is not to be used by young children over the age of three unless the controls have been pre-set by a parent or guardian or unless the child has been adequately instructed on how to operate the controls safely.
-
People with pacemakers should consult their physicians or the manufacturer of the pacemaker before using the foot warmer, as the electronic and magnetic emission from this product can affect the pacemaker’s function under certain circumstances.
-
If in doubt, please contact your physician before use.
-
May only be used with the accompanying remote control.
-
Avoid the following situations due to the risk of electric shock:
The electric parts must not come into contact with water or other liquids. Never use the product if it is wet. Never attach safety pins or the like to the product. -
The foot warmer must only be connected to installations corresponding to the labeling found on the product.
-
Do not used if wet.
-
Shoes must be removed before use.
-
The foot warmer must always remain under observation when plugged in, and it must be completely cooled before being stored away.
-
Always check the product for damage before use. Discard the product if it shows signs of malfunctioning or damage.
-
Long-term use at the highest heat level can result in burns.
-
Remove the foot warmer’s plug from the power outlet after use, in case of a malfunction, or when cleaning.
-
May not be used for animals.
OPERATION
Control selections:
- 0=OFF
- 1 = low heat
- 2 = medium heat
- 3 = high heat
- It takes approximately 15 minutes to reach the desired temperature. Remember that a temperature that the hand feels warm on may be extremely hot for the feet.
- Begin by heating the foot warmer to the highest heat level. After 15 minutes the temperature can be adjusted to the desired level.
- The foot warmer’s heating function shuts off automatically after 90 minutes. If you wish to reheat the foot heater after 90 minutes, simply set the heat level back to 0 for approximately 5-10 minutes. You can then select the desired heat level once again. The foot heater is equipped with overheating control.
- Unplug the foot heater when it is not in use.
TECHNICAL SPECIFICATIONS
- 220 – 240V 50Hz
- 100 watt
- Dimensions: 30 x 30 x 24 cm
CLEANING
- The inner cover of the foot warmer can be washed by hand and machine. Remove the inner cover from the foot warmer and wash it.
- The outer part must not come into contact with water due to the risk of electric shock.
STORAGE
- Allow the product to cool before storage.
- Do not place objects on top of the product during storage.
- Due to the risk of suffocation, the product and its packaging must be kept out of the reach of children.
- Always store the foot warmer in a dry place and out of the way of other heat sources.
Questions about your product? Please contact us at
customerservice@agbrands.nl
© AG Brands B.V. BOVENDIJK 203 3045PD ROTTERDAM THE NETHERLANDS
www.agbrands.nl
DESIGNED IN THE NETHERLANDS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>