OCHAIN∙R Active Spider Mmuscular Bikes Installation Guide
- June 16, 2024
- OCHAIN
Table of Contents
Installation Guide
OCHAIN∙R active spider user manual: warranty, installation and maintenance.
Limited warranty and disclaimer
OCHAIN∙R active spider is a patented component by Ochain srl.
Ochain srl guarantees its products against materials or manufacturing defects
for a period of 2 years starting from the date of purchase by the first buyer,
proven by the receipt or by the invoice in case of a direct purchase.
The defect has to be communicated by the first owner to the dealer in case of
nondirect purchase or by mail/e-mail to
info@ochain.bike in case of direct purchase.
In case of return, just after our authorization, transport charges and risks
are at customer cost.
Ochain srl recommends to follow the provided instructions for the correct
usage and installation. In case instructions are not followed, warranty
expires.
OCHAIN∙R manuals can be found and downloaded online on website
www.ochain.bike Warranty do not cover missed, wrong
or bad ordinary or extraordinary maintenance, damages caused by wrong assembly
or with non-compatible components assembly, impacts, falls or accidents,
normal consumption, alteration or modification of the original product and
damages caused by transport.
If Ochain srl, after checking the product, finds that the damage is due to one
of the reasons mentioned above, the warranty request will not be accepted and
the defective item is sent back to the plaintiff who supports the shipping
fees.
Ochain srl is not responsible for damages or injuries caused by improper
installation or wrong usage of the product
To the extent allowed by local law, except for the obligations specifically
set forth in this warranty statement, in no event shall Ochain srl or its
third party suppliers be liable for direct, indirect, special, incidental or
consequential damages.
Safety warnings
THIS USER MANUAL CONTAINS IMPORTANT AND USEFUL INFORMATION REGARDING THE
PROPER INSTALLATION, OPERATION, CARE AND MAINTENANCE OF YOUR OCHAIN PRODUCT.
CAREFULLY READ, FOLLOW AND UNDERSTAND THE INSTRUCTIONS AS DETAILED IN THIS
USER’S MANUAL.
KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.
If you have any doubt whatsoever regarding your ability to install or service
this product, please consult OCHAIN∙R user manual, OCHAIN website and seek the
assistance of a professional bicycle mechanic. Do not perform any
modifications or adjustments that are not outlined in this manual.
Incorrect installation or servicing may impair performance, and could result
in a dangerous situation leading to serious injury or death.
Components that have experienced excessive wear, deformations or impacts or
other damage need immediate professional inspection or replacement. Please
have this product regularly inspected by a qualified mechanic for any signs of
wear or damage.
Failure to perform necessary and essential maintenance could drastically
reduce the service life of your OCHAIN∙R product and reduce its performance.
If you have any questions, please contact a professional bike mechanic or ask
Ochain for support at info@ochain.bike.
Maintenance
Inspect your OCHAIN∙R product for wear, looseness or damage including cracks,
dents and serious scratches before each ride and after every fall or crash.
Do not use your OCHAIN∙R product until it has been thoroughly inspected,
repaired or replaced.
PERIODICALLY CHECK THE TIGHTENINGS. INCORRECT TIGHTENING MAY CAUSE
MALFUNCTIONING OR BREAKAGE.
Elastomers play an important role in OCHAIN∙R and they need to be replaced
every 150 hours of use on your mtb in order to preserve the product and to
keep high standards of performance.
OCHAIN∙R comes with an extra replacement kit.
You will find our elastomers replacement kits on our online store or at the
local bike shop where you bought this product.
For OCHAIN∙R care and maintenance guidelines please visit our service page at
wwwo.ochain.bike/service or follow our
Ochain Youtube channel.
NOTE: Warranty is guaranteed only if this service is provided.
OCHAIN∙R active spider specifications
Main material:
Al Alloy 7075 T6
Surface treatments:
Black hard anodizing (MOD. NERO)
Custom precious hard coating (MOD. PREGIO)
Dimensions:
93 mm x 93 mm x 13 mm
Weight: 150 g
Chainring offset:
+3mm chainring offset (chainline 52mm/55mm)
Chainline is the distance between the centerline of your
frame and the average centerline of your chainring.
Compatibility:
OCHAIN∙R is a 1X 104 BCD Boost active spider
It replaces the stock chainring spider or direct mount chainring so that you
match it with most popular cranks’ brand direct mount standards. Updated model
list on our website for directing the correct purchase.
Nethertheless, Ochain srl cannot guarantee compatibility with every single
frame mounting these motors and with every single cranks on the
market.
Bolt Circle Diameter or BCD is the
imaginary cirlce that passes through the center of all the chainring mounting
holes.
OCHAIN∙R active spider installation
Disassemble your crankset from the frame, referring to the manufacturer’s
manual or to a professional bicycle mechanic.
Remove currently installed chainring configuration from the crank arm.
NOTE: If your bike already mounts a BCD 104 standard chainring bolted to
the spider and you want to use it on OCHAIN∙R, remove the chainring from the
spider.
For safety and performance reasons, make sure to check good conditions of
chainring with the help of a professional bicycle mechanic.
Install your chainring on OCHAIN∙R using 4 standard chainring nuts.
WARNING: OCHAIN∙R fits only with 5 mm female lenght chainring nuts!
Use Loctite medium on bolts.
Tighten all four chainring bolts to chainring nuts with the recommended nut
manfacturer’s tightening.
Use some grease on the external of the chainring bolts and tighten with a
wrench FULLY ENGAGED in the bolt.
NOTE: For a perfect result we recomend to use our OCHAIN∙R chainring
bolts and nuts (tightened to 8 Nm).
Align OCHAIN∙R with your crank arm as shown in the picture.
Lasered mark signs “>>>” on OCHAIN surface show the correct crank arm
position. 
Finally re-assemble your crankset referring
to the manufacturer’s manual or to a professional bicycle mechanic.
OCHAIN∙R active spider different setups
Pedal kickback is measured in degrees to indicate how much the pedals rotate
backwards at a given point in the suspension travel. OCHAIN∙R allows the
chainring to rotate backwards in order to disengage the transmission from the
suspension, improving the whole riding experience and the bike’s performances.
Our engineers defined four setup possibilities, resulting in different degrees
of proportional rotation. The defined options are: 4° / 6° / 9°/ 12°.
OCHAIN∙R makes it easy to switch from one setup to another in seconds, using a
2,5 hex key.
An hex key is all you need to disengage the system by rotating backwords the
black regulation nut. Same key, now on the central allen seat, and you access
all possible setups. Lasered lines are there as a reference for you. Lock back
the system and you are ready to ride.
OCHAIN∙R is facing you, mounted on your bike.
Gently clean it dust and mud with a cloth.
NOTE: Please do not use any chemical products to preserve our environment.
The Black Regulation Nut (BRN later in this manual) has two sockets for 2.5
hex key, lasered marks indicate them. Insert the 2.5 hex key in the available
socket on the radial face of the BRN, as shown below.
To allow setup modifications, release the regulation system by slowly
unscrewing counterclockwise, for as far as an half turn.
IMPORTANT:
Do not unscrew more then half turn to avoid damages to the system and the
accidental removal of the Seeger ring.Now the regulation system is released.
Remove the hex key and insert it in the socket of the regulation axis, on the
central axis of the BRN.
IMPORTANT:
Never operate on the regulation axis without releasing the system first.
Unscrewing till the end point, the system will stop on the 12° position. Slightly screw clockwise and the system reaches the 9°, the 6° and the last 4° position The lasered graphic shows the order and the reference distance between regulations.
Once the desired position is selected, remove the
hex key from the central axis and insert it back in the available radial
socket on the BRN.
Slightly screw clockwise to secure the regulation system in the position.
The ideal torque is 3Nm.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>