SUNAPEX 12V Solar Panel Car Battery Charger User Manual

SUNAPEX 12V Solar Panel Car Battery Charger

Introduction

The SUNAPEX 10W 12V Solar Panel Car Battery Charger is a reliable and eco- friendly solution to keep your 12-volt car, boat, RV, marine, or trailer battery charged and maintained. This waterproof solar-powered battery charger harnesses the power of the sun to provide a steady trickle charge to your battery, ensuring it stays in optimal condition. With its easy installation and low-maintenance design, it’s a convenient addition to any vehicle or equipment that relies on a 12-volt battery.

Specifications

• Solar Panel Wattage : 10 watts
• Voltage : 12 volts
• Weatherproof Rating : IP65
• Charging Technology : Trickle charger and maintainer
• Connection Type : Alligator clips and cigarette lighter adapter
• Dimensions : (L x W x H) 13.8 x 9.8 x 0.4 inches
• Weight : 2.4 pounds

What’s in the Box

• 1 x SUNAPEX 10W 12V Solar Panel
• 1 x Alligator Clip Cable
• 1 x Cigarette Lighter Adapter
• 4 x Mounting Screws
• 1 x User Manual

Key Features

1. Solar-Powered Charging : Harnesses solar energy to charge and maintain your 12-volt battery, reducing electricity consumption and environmental impact.
2. Waterproof Design : The IP65 waterproof rating ensures durability and protection against the elements, making it suitable for outdoor use in all weather conditions.
3. Easy Installation : Comes with alligator clips and a cigarette lighter adapter for easy connection to your battery or vehicle’s power source.
4. Trickle Charging Technology : Provides a slow, consistent charge to prevent overcharging and prolong the life of your battery.
5. Versatile Applications : Ideal for maintaining batteries in cars, boats, RVs, marine equipment, trailers, and more.

How Can I Clear My Solar Charger’s Charging Status?

1. Solid blue : typical output while receiving sunshine;
2. When it is attached to the battery and the red light is on, it is charging.
3. The three colored LEDs will all light up when the green light turns on, indicating that the battery is completely charged.
4. A short circuit is indicated by all lights off. Need to verify the connection’s polarity

Efficient Power Supply
The more efficient monocrystalline silicon material used to make the SUNAPEX 10W solar battery charger absorbs heat from the sun to a larger degree. The power output surpasses that of existing solar panel chargers by at least 30%, resulting in a significant improvement in charging speed and efficiency.

Why Opt for Sunapex?
Unlike solar panels with plastic frames, the FR-4 epoxy board used to make the SUNAPEX solar panel charger’s frame never melts or deforms, even at high temperatures. You don’t have to be concerned about the solar panels breaking or becoming unusable.

Inadequate Intelligent Manager
The SUNAPEX 12-volt solar battery charger, with its improved Intelligent Charger Controller and charging algorithm, guarantees that there will be no overcharging, reverse discharge, overvoltage, or short circuit, safeguarding both your equipment and personal safety.

Simple to Set Up and Operate
It is simple to install and use due to its lightweight and small design. It has three wiring methods (Red is positive, Black is negative) and a rapid SAE connection. It is commonly used in 12V LiFePO4, lithium batteries, and DC charging equipment.Ideal 12V solar battery preserver for vehicles, boats, recreational vehicles, trailers, ATVs, and more.

Charging Display
Three-color LED indications on the SUNAPEX 10-watt solar trickle charger make it easier to see how the device is operating. Solid blue denotes typical output and the receipt of sunlight. Connected to the battery and charging is shown by solid red. The battery is full when the green light is solid. The absence of lights suggests a short circuit.

How to Use

1. Choose a suitable location with access to sunlight.
2. Connect the alligator clips or cigarette lighter adapter to the battery or power source.
3. Place the solar panel in the chosen location, ensuring it receives direct sunlight.
4. The solar panel will automatically start charging the battery. Monitor the battery’s voltage and disconnect when fully charged or maintain a desired voltage level.

Safety Precautions

• Do not expose the solar panel to extreme heat or fire.
• Keep the solar panel clean and free from debris to maximize efficiency.
• Disconnect the solar panel from the battery when not in use to prevent overcharging.
• Follow the manufacturer’s instructions and safety guidelines for your specific battery type.

Maintenance

• Clean the solar panel regularly to remove dirt, dust, and debris.
• Check the wiring and connections for any signs of wear or damage.
• Store the solar panel in a safe and dry place when not in use.

Troubleshooting

1. If the solar panel does not charge the battery:
   • Ensure the panel is placed in direct sunlight.
   • Check the wiring connections for loose or damaged parts.
   • Verify that the battery is in good condition and has not reached its end of life.
2. If the battery continues to discharge:
   • Double-check the connections to make sure they are secure.
   • Ensure that the solar panel is receiving enough sunlight.

Frequently Asked Questions

How does the SUNAPEX 10W 12V Solar Panel Charger work?

The SUNAPEX 10W 12V Solar Panel Charger harnesses solar energy to provide a trickle charge to your 12-volt battery, helping to maintain its charge.

Can I use the SUNAPEX 10W 12V Solar Panel Charger for my car battery?

Yes, it is designed for car batteries and various other 12-volt applications.

Is the SUNAPEX 10W 12V Solar Panel Charger waterproof?

Yes, it has an IP65 waterproof rating, making it suitable for outdoor use in all weather conditions.

What's included in the SUNAPEX 10W 12V Solar Panel Charger package?

The package includes the SUNAPEX 10W solar panel, alligator clip cable, cigarette lighter adapter, mounting screws, and a user manual.

Can I use the SUNAPEX 10W 12V Solar Panel Charger for marine batteries?

Yes, it is suitable for marine batteries, as well as boat and RV batteries.

How do I install the SUNAPEX 10W 12V Solar Panel Charger?

You can install it by connecting the alligator clips or the cigarette lighter adapter to your battery or power source, then place the solar panel in direct sunlight.

Is the SUNAPEX 10W 12V Solar Panel Charger easy to install?

Yes, it comes with all the necessary cables and mounting hardware, making installation straightforward.

Does the SUNAPEX 10W 12V Solar Panel Charger prevent overcharging?

Yes, it uses trickle charging technology to prevent overcharging and prolong the life of your battery.

Can I leave the SUNAPEX 10W 12V Solar Panel Charger connected to my battery all the time?

Yes, you can leave it connected to maintain your battery's charge level.

How do I ensure my battery is compatible with the SUNAPEX 10W 12V Solar Panel Charger?

Check the voltage of your battery; it should be a 12-volt battery for compatibility.

What is the ideal location to place the SUNAPEX 10W 12V Solar Panel Charger for optimal performance?

Choose a location with direct sunlight exposure for maximum efficiency.

Can the SUNAPEX 10W 12V Solar Panel Charger be used for RV batteries?

Yes, it is suitable for RV batteries and can help maintain their charge during storage.

How do I clean and maintain the SUNAPEX 10W 12V Solar Panel Charger?

Clean the solar panel regularly to remove dirt and debris, and check the connections for any signs of wear or damage.

Video Evaluation: Working Voltage of Solar Panels

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>