XFasten DSCT2101C Carpet Tape Instruction Manual

June 16, 2024
Xfasten

XFasten DSCT2101C Carpet Tape Instruction Manual
XFasten DSCT2101C Carpet Tape

Instructions Manual
XFASTEN CARPET TAPE

(Product can come in different sizes and color depending on your order)

INSTRUCTIONS

  1. Clean both surfaces where you would be install- ing the tape. Lint, dirt, and dust can significantly lessen the bonding strength of adhesives. 2. Peel the tape from the roll. Do not cut a strip first.
  2. Apply the tape on the surface, with the other end of the tape still pooled on the roll.
  3. Cut the tape, making sure that you apply tension on the strip by partially pulling the roll. The tension will make the tape easier to cut.
  4. Remove the adhesive liner. To separate the adhe-sive liner easily, you can use any flat tipped object like a card, knife’s edge or your fingernail to create an initial gap between the liner and the tape.
  5. Appy more strips by repeating steps 2-5.


PEELING THE ADHESIVE LINER

If you’re having troubles in separating the adhesive liner from the Carpet Tape, then you could use any flat tipped object, like your nails or thin card to create an initially small gap which can be fully peeled to release the liner. The tape can be used for carpet-to-floor rug-to-carpet setups. carpet- to-carpet, and


WARNING AND DISCLAIMERS

Adhesive may react differently to various surfaces and may be incompatible to unique materials. Therefore, it is recommended to try out a short strip to a small corner of the surface first before full ap- plication. By applying the tape, the user assumes responsibility on how the surface reacts with the adhesive.

REMOVING THE ADHESIVES

The Carpet Tape is Residue-Free and Sur- face-Safe. However, we are still required by law to provide adhesive removal tips. You may see the following tips below:

  1. Partially melting the adhesive using the warmair exhaust of a hair dryer.
  2. Wiping the surface with a warm water with soap and white vinegar solution.
  3. Applying Goo Gone Solution or simply apply- ing lighter fluid on the surface. The residue can easily be removed andwiped clean through this process.

All statements, technical information, and recom- mendations related to the Seller’s prod- ucts are based on information reliable, but the accuracy or completeness thereof is not guaran- teed. Before utilizing the product, the user should determine the suitabilityof the product for its in- tended use. The user assumes all risks and liabili- ty whatsoeverin connection with such use.

SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER PERSON UNDER ANY LEGAL THEORY, INCLUDING BUT NOT LIMITED TO NEGLIGENCE OR STRICT LIABILITY, FOR ANY INJURY OR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAG- ES SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY OF THE SELLER’S PROD- UCTS THAT WERE DEFECTIVE.

You can print this manual for application reference. We promise that this will be quick but informative to read! For questions, inquiries and concerns you may email us directly at

customerservice@xfasten.com

305-985-4937

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals