MELISSANI M1 Reverse Osmosis Water Purifier Instruction Manual

MELISSANI M1 Reverse Osmosis Water Purifier

Product Information

• Product Name: Melissani M1 Reverse Osmosis Water Purifier
• Model: M1
• Capacity: 1.5 Gallons (6 Liters)
• Flow Rate: 14 oz per minute (400ml)
• Dimensions: 19 x 9.5 x 17
• Weight: 24 lbs
• Rated Voltage: 110V
• Rated Power: 1500W
• Power Consumption: 0.1 kW/day
• Power Cord Length: 6 feet (186cm)
• Working Pressure: 0.4 – 0.6 MPa (58 – 87 psi)
• Water Source: City (Tap) or Well

Product Usage Instructions

Before Use:

1. Hold Power for 2 seconds to turn on.
2. Fill Tap Water tank.
3. Press and hold Clean for 3 seconds to flush the system and filters (takes 6 minutes).
4. Make sure to have a large container under the water dispenser, or have the dispense nozzle positioned over your sink.
5. Empty Wastewater tank and refill Tap Water tank.
6. Repeat this cleanin  cycle 3 times before using M1.
7. M1 is ready to make clean, crisp water.

Operation:

1. Place water purifier on a flat surface and plug it in.
2. Remove the water tank, fill the tap water tank with fresh tap water, install the water tank on the purifier, and close the lid of the water tank.
3. Plug in the purifier and hold the power key for 2-3 seconds to power on the purifier.
4. To achieve optimal water quality, it is recommended to clean the purifier manually by holding the Clean Key for 3 seconds. Make sure to either place a large container under the nozzle or position nozzle over a sink to drain the water being flushed through the system.

Functions:

• Power: Hold for 2 seconds to power on/off.
• Clean: Hold 3 seconds to initiate the deep cleaning cycle. Takes 6 minutes. Cleans every part of the machine’s internal waterways, including filters.
• Filter Life: Reset: Hold for 3 seconds to reset filter life indicators after replacement. Hold the Reset key for 3 seconds then use the reset key again to select the appropriate filter to Reset (1, 2, or 3). Indicators turn orange when 20% of filter life remains and red when it is time to replace the filter.
• Purify: On when purifying water. Flashes when cleaning.
• Add Water: Refill water tank/empty waste water tank.

FAQ

• Q: What is the capacity of the Melissani M1 Water Purifier?
• A: The Melissani M1 has a capacity of 1.5 gallons (6 liters).
• Q: What is the flow rate of the Melissani M1 Water Purifier?
• A: The Melissani M1 has a flow rate of 14 oz per minute (400ml).
• Q: What is the working pressure range for the Melissani M1 Water Purifier?
• A: The working pressure range for the Melissani M1 is 0.4 – 0.6 MPa (58 – 87 psi).
• Q: Can I use the Melissani M1 with well water?
• A: Yes, the Melissani M1 can be used with city (tap) water or well water.
• Q: How do I clean the Melissani M1 Water Purifier?
• A: To clean the Melissani M1, hold the Clean Key for 3 seconds to initiate the deep cleaning cycle. Make sure to have a large container under the nozzle or position the nozzle over a sink to drain the water being flushed through the system.

Welcome to Melissani, where our passion for pure water is deeply rooted in the inspiration we draw from the pristine Melissani Cave (Μελισσάνη) in Greece. Renowned for its crystal-clear, naturally pure water, the Melissani Cave serves as a symbol of our commitment to providing the highest quality water purification solution for your home.

Our premium Melissani M1 Countertop Reverse Osmosis Water Purifier is a testament to this dedication, designed to bring the essence of Melissani’s purity to your kitchen. We are proud to offer a product that not only delivers exceptional performance but also embodies the true spirit of our namesake, ensuring that every drop of water you consume is as pure and refreshing as nature intended. Thank you for choosing Melissani, and we hope you enjoy the unparalleled quality of the water our purifiers provide.

Before Use

1. Hold Power for 2 seconds to turn on.
2. Fill Tap Water tank.
3. Press and hold Clean for 3 seconds to flush the system and filters (takes 6 minutes).
   • Make sure to have a large container under the water dispenser, or have the dispense nozzle positioned over your sink.
4. Empty Wastewater tank and refill Tap Water tank.
5. Repeat this cleaning cycle 3 times before using M1.
6. M1 is ready to make clean, crisp water.

Specifications

• Model: M1
• Capacity: 1.5 Gallons (6 Liters)
• Flow Rate: 14 oz per minute (400ml)
• Dimensions: 19 x 9.5 x 17
• Weight: 24 lbs
• Rated Voltage: 110V
• Rated Power: 1500W
• Power Consumption: 0.1 kW/day
• Power Cord Length: 6 feet (186cm)
• Working Pressure: 0.4 – 0.6 MPa (58 – 87 psi)
• Water Source: City (Tap) or Well

Diagram

Functions

Operation

1. Place water purifier on a flat surface. Plug in.
2. Remove the water tank, fill the tap water tank with fresh tap water, install the water tank on the purifier, and close the lid of the water tank.
3. Plug in the purifier and hold the power key for 2-3 seconds to power on the purifer.
4. To achieve optimal water quality, it is recommended to clean the purifier manually by holding the “Clean Key” for 3 seconds. Make sure to either place a large container under the nozzle, or position nozzle over a sink, in order to drain the water being flushed through the system.
5. After the cleaning process, the water tank should be emptied and refilled with tap water. At this point, the water purifier will purify automatically and is ready for routine use.

Filter Replacement

1. Turn off the power and take out the old filters.
2. Press the “ ” button to open the head cover of the machine
3. Rotate the filter element counterclockwise and pull up
4. Installation of new filter element.
5. Press and hold “RESET” and then touch “RESET” to select the corresponding filter element. Press and hold “RESET” for 3s to complete resetting.

Note : Only original Melissani filters should be used to ensure proper performance and safety of drinking water. For any issues during filter replacement, please contact customer service.

Filters

Filter

|

Material

|

Removes

| Replacement Period
---|---|---|---

PAC

| Folded Polypropylene and activated carbon rod composite|

Dirt, Metal, Large Particles, Chlorine, VOC’s, THM’s and more.

|

6 months or

3000 liters

RO

|

200G RO Flux Membrane

| Remove all particles as small as .0001 microns.| 12 months or

6000 liters

CF

|

Activated Carbon filter

| Polishes water quality improves taste.| 6 months or

3000 liters

Filter Club

Pure water for life with Filter Club
Automated replacement filter delivery 10% Discount on replacement filters Extended 1-year Warranty

Scan or visit: melissaniwater.com/filter-club

Contact us

contact@melissaniwater.com 813-328-6390 4010 W. State Street, Tampa, FL 33609

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>