IQOS H197236 Iluma Prime Kit User Manual
- June 16, 2024
- IQOS
Table of Contents
IQOS H197236 Iluma Prime Kit
Product Information
Specifications
- Product Name : IQOS ILUMA PRIMETM
- Compatibility: Compatible only with SMARTCORE STICKSTM
- Charging Time: Approximately 135 minutes
Features and Settings
You can modify your IQOS experience according to your preferences with the
IQOS App. Please register by scanning QR code or log in on
www.iqos.com/iluma
and follow the instructions. IQOS app may not be available in your country.
Getting Started
-
Turn On
Press and hold the Pocket Charger Button for 4 seconds, then release. The Pocket Charger Status Lights and Holder Status Lights will turn on slowly. -
Charge Holder
Insert the Holder into the Pocket Charger, then close the Wrap to charge. The Holder Status Light will show the Holder battery level. -
Charge Pocket Charger
Before first use, fully charge your device with the Power Adaptor and Charging Cable. This process takes approximately 135 minutes.
Product Usage Instructions
How to Use Your IQOS ILUMA PRIMETM
-
Insert SMARTCORE STICKTM
Insert the SMARTCORE STICKTM into the line on the filter until the Holder vibrates and the Light(s) pulse(s). Heating starts automatically or by pressing the Button for 1 second. -
Begin Use
Start using the device once the Holder vibrates and the Lights stay fixed. -
Nearly Complete
To signal the last 30 seconds or last 2 puffs, the Holder will vibrate with Light(s) pulsing white. -
Remove SMARTCORE STICKTM
Remove the used SMARTCORE STICKTM and dispose of it according to Safety Warnings and Instructions. -
Recharge Holder
Insert the Holder into the Charger for recharging.
Quick Tips
- 2 lights indicate readiness for 2 uses
- 1 light indicates readiness for 1 use
Check Holder Status
Tilt the Holder towards you or short press the button. The Holder Lights
will indicate the Holder battery level.
- 2 lights indicate readiness for 2 uses
- 1 light indicates readiness for 1 use
Check Holder Status on the Pocket Charger
Short press the Pocket Charger Button. The Holder Status Light will turn
on.
Check Pocket Charger Status
Short press the Pocket Charger Button. The Pocket Charger Status Lights
will turn on to indicate the battery level.
Autostop
During use, the experience will stop if the SMARTCORE STICKTM is moved or
removed from the Holder.
SUPPORT and SERVICES
For information on customer support and additional services for IQOS users,
please visit www.iqos.com/services.
FAQ
-
What should I do if the battery is depleted?
If the battery is depleted, the Light will blink yellow, indicating the need to charge. -
What should I do if the Light blinks white twice?
If the Light blinks white twice, it means there is an issue with the device. Try resetting the Pocket Charger. If the red light blinking persists, contact Customer Care. -
How do I reset the Pocket Charger?
To reset the Pocket Charger, place the Holder in the Pocket Charger and press the Button for 10 seconds, then release. All Status Lights will turn OFF and ON to confirm a RESET.
IQOS ILUMA PRIME™ Pocket Charger
IQOS ILUMA™ Holder
IQOS ILUMA™ is compatible only with SMARTCORE STICKS™
Charging
SUPPORT and SERVICES
For information on customer support and additional services for IQOS users,
please visit www.iqos.com/services
FEATURES AND SETTINGS
-
You can modify your IQOS experience according to your preferences with the IQOS App*.
-
Please register by scanning QR code or log in on www.iqos.com/iluma and follow the instructions.
-
IQOS app may not be available in your country.
Getting Started
-
TURN ON
Press and hold Pocket Charger Button for 4 seconds, then release; Pocket Charger Status Lights and Holder Status Lights will turn on slowly. -
CHARGE HOLDER
- Insert Holder into the Pocket Charger, then close Wrap to charge.
- Holder Status Light will show Holder battery level.
-
CHARGE POCKET CHARGER
Before first use, fully charge your device with Power Adaptor and Charging Cable. (approx. 135 min)
How to use your IQOS ILUMA PRIME™
-
INSERT SMARTCORE STICK™
-
Insert the SMARTCORE STICK™ to the line on filter until Holder vibrates and Light(s) pulse(s).
-
Heating starts automatically, or by pressing Button for 1 second.
-
BEGIN USE
Start using once Holder vibrates and Lights stay fixed. -
NEARLY COMPLETE
To signal the last 30 seconds or last 2 puffs, Holder will vibrate with Light(s) pulsing white. -
REMOVE SMARTCORE STICK™
Remove used SMARTCORE STICK™ and dispose as per Safety Warnings and Instructions. -
RECHARGE HOLDER
Insert the Holder in the Charger for recharging.
Quick Tips
-
CHECK HOLDER STATUS
Tilt Holder towards you or short press button, Holder Lights indicate Holder battery level. -
CHECK HOLDER STATUS ON THE POCKET CHARGER
Short press Pocket Charger Button. Holder Status Light will turn on. -
CHECK POCKET CHARGER STATUS
Short press Pocket Charger Button. Pocket Charger Status Lights will turn on to indicate battery level. -
AUTOSTOP
During use, the experience will stop if the SMARTCORE STICK™ is moved, or removed from the Holder. -
LIGHT BLINKS YELLOW
Battery depleted, need to charge. -
LIGHTS BLINK WHITE TWICE
IQOS ILUMA PRIME™ is outside operating temperature range (0°C~40°C). -
LIGHT BLINKS RED
- Reset Pocket Charger.
- If red light blinking persists, contact Customer Care.
-
TO RESET
Place Holder in Pocket Charger and press Button for 10 seconds then release. All Status Lights will turn OFF, and turn ON, to confirm a RESET.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>