CANZONE 2BD2F DLP Smart Projector User Manual

SMART PROJECTOR DLPERER
USER MANUAL

First of all thank you for using our product!
Please read this user manual carefully before using so it will help you to quickly be familiar with this product.
In case of any printing or translation error, we apologize for the inconvenience. As for the content change, we are sorry for no further notice.

Overview of Projector

Note: Different models of products, interfaces and buttons will be different, depending on the actual product. Note: Different models of products, the configuration of remote control will be different, depending on the actual product.

Power on/Power off

Power on

1. Switch the [ON/OFF] to the”ON” state, press the to power on, the indicator is blue, waiting for the screen to display.
2. If the power is insufficient, please connect the power adapter to the [DC-IN] of the projector for charging.

Power off
Press the to power off, the interface of shutdown will pop up, click”OK” , after the projector stops running, please switch the [ON/OFF] to the”OFF”state, otherwise the battery will still be in a power-consu ming state.

sharpness

The sharpness of the picture can be adjusted by turning the [Focus] of projector.

HD IN

1. One end of the HD line is connected to the [HD-IN] interface of the projector, and the other end is connected with the [HD-OUT] interface of computer/other devices.
2. Enter the “HD IN” on the main interface of the projector.

Keystone Correction

Keystone Correction Vertical
Enter “Settings” on the main interface → “Projection Setting” → “Keystone Correction Vertical”, the projector default auto vertical keystone correction, also supports manual correction.

Keystone Correction Horizontal
Enter “Settings” on the main interface → “Projection Setting” → “Keystone Correction Horizontal”, the projector supports manual horizontal keystone correction, also supports multi angle adjustment. Note: Different models of products, the function of “Keystone Correction Horizontal” will be different, depending on the actual product.

WI-FI Setting

Enter “Settings” on the main interface →”Networking Setting”→”WI-Fl Setting”, click the switch to “ON” state, select the network which you want to connect, enter the password and click”Link”.

Hotspot Setting

Enter”Settings”on the main interface → “Networking Setting” → “Hotspot Setting”, click the switch to”ON”state, you can set the parameters, click “OK”, and then it searches for and connects the hotspots of projectors on other devices.

BT Setting

Enter “Settings” on the main interface → “BT Setting”, click the switch to the “ON” state, search for the device which you want to connect, pairing.

Language Setting

Enter “Settings” on the main interface → “Language Setting” and select the language you want to switch.

iMirror

For iOS system

1. iPhone/iPad and projector need to be connected to the same network. In the absence of a network, the device can be connected to the hotspot of the projector.
2. Enter the APP “iMirror” on the projector.
3. Open the “Screen Mirroring” on the iPhone/iPad, and then search the device name of projector for matching.

Miracast

For Android system

1. Android devices and projector need to be connected to the same network.
2. Enter the APP “Miracast” on the projector.
3. Enter “Wireless projection” interface on Android devices, and then search the device name of projector for matching.

E Share Server

For Android/iPhone/iPad

1. Devices and projector need to be connected to the same network. In the absence of a network, the device can be connected to the hotspot of the projector.
2. Enter the APP “EShare” on the projector.
3. Following the steps of the interface display, download and install the “EShare” APP on other devices.
4. When the “EShare” APP is installed, and then search the device name of projector for matching.

Play 3D Mode

1. Before playing 3D video, you must turn off the”Keystone Correction Horizontal”and “Screen Zoom” functions in “Settings”.
2. Enter the APP “Movie Player” to play 3D video, click on the “3D” option in the menu bar, and set up the”Play 3D Mode”, you can purchase on your own and use the active shutter 3D glasses for DLP-Link 3D projector.

Note: Different models of products, the function of “Play 3D Mode” will be different, depending on the actual product.

APP Install/Uninstall

APP Install

1. If the APK Downloaded, enter the “App Center”→ “App Installer”, find the location of the APK, click and install it.
2. If the APK is not downloaded, you can download and install it in other ways.

APP Uninstall

Enter “Settings” on the main interface → “Other Setting” → “Apps & notifications”, click the App that needs to be uninstalled.

File Browser

1. Read: Insert the U disk/TF card, enter the APP “File Browser”.
2. Edit: Select the menu icon , tick the file you want to operate deselect the menu icon , select the options you want to operate in the edit icon directory .
3. If”Cut” or “Copy” is selected, you need to first select the directory, and then click the edit icon to select “Paste”.

Factory datareset

Enter “Settings” on the main interface → “Other Setting” → “System” —”Advanced” → “Reset options” →”Erase all data (factory reset)” → “RESET PHONE” .

Safety matters

Notice

1. Do not put the projector on your leg or any part of your body to prevent injury from the heat.
2. Do not place any liquid or heavy objects on the projector.
3. Avoid using the projector during weather of high humidity or thunderstorms.
4. Do not disassemble the projector at will. There is a risk of electric shock, which also affects the normal maintenance.

Use

1. Projector is only suitable for use in non-high temperature environment. Do not block the air intake and heat sink during operation or charging.   ****
2. Do not look directly at the lens of the projector during use, or you may hurt your eyes.
3. Please use the projector in a darker room or draw the curtain to get better projection effect.
4. Please use the projector carefully. Falling or impacting may damage parts or cause blurred images and abnormal display.

Power supply

1. Please charge the projector with its own power adapter. Other adapters may cause serious damage to the projector.
2. Careful use of power cord to avoid excessive bending. Damage to the power cord may lead to electric shock and fire.
3. After use, the power adapter should be unplugged from the socket.

Clean

1. Please disconnect the power supply before cleaning the projector. Wipe the fuselage with a clean cotton wool or soft cloth, and then wipe off the residual moisture with a dry cloth.
2. Neutral detergents may be used, but do not use strong detergents or solvents (such as alcohol or diluents).
3. Lens should be cleaned with soft dust-free cloth, lens cloth or lens paper. Be careful not to scratch the lens.
4. Please use a soft brush regularly to clean the heat sink and speaker parts of the projector, otherwise the heat sink will be blocked by dust, which will cause overheating of the projector and even lead to machine failure.

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>