blueparrott S650-XT Convertible Bluetooth Headset User Guide
- June 16, 2024
- BlueParrott
Table of Contents
blueparrott S650-XT Convertible Bluetooth Headset
Specifications
- Product Model : BlueParrott S650-XT
- Compatible Products : BlueParrott B650-XT, BlueParrott S650-XT
Product Information
The BlueParrott S650-XT is a high-quality headset designed for wireless communication. It features advanced noise-canceling technology, allowing for clear and uninterrupted conversations even in noisy environments. The headset has a built-in BlueParrott ButtonTM for voice commands and mute functionality. It is powered by a rechargeable battery and supports Bluetooth connectivity for easy pairing with compatible devices.
Product Usage Instructions
Clearing Pairing Memory
To clear the pairing memory on your BlueParrott S650-XT headset, you need to perform a reset. Follow these steps:
- Ensure your headset is powered on.
- Press and hold both the Volume up and Volume down buttons simultaneously for 10 seconds.
- You will hear “Pair mode” and see the LED flashing alternating red and blue.
- Your headset has now been reset, and it will automatically enter pairing mode.
Note: After resetting, you need to re-pair the headset with your smartphone. Remember to delete the previous pairing before re-pairing.
Turning Off the Headset
If you do not wish to pair the headset with a device, you can turn it off. To turn off the BlueParrott S650-XT headset, simply press and hold the power button until the LED indicator turns off.
FAQ
- How do I clear the pairing memory in my headset?
- To clear the pairing memory, you must reset your BlueParrott S650-XT headset. Follow the steps mentioned in the “Clearing Pairing Memory” section of this manual.
- Do I need to re-pair the headset after resetting?
- Yes, after resetting, you need to re-pair the BlueParrott S650-XT headset with your smartphone. Make sure to delete the previous pairing before re-pairing.
How do I clear the pairing memory in my headset?
To clear the pairing memory, you must reset your headset. A reset clears the list of paired devices and restores the factory defaults of the BlueParrott Button™ (voice command and mute). Follow these steps to reset your headset.
- Ensure your headset is powered on.
- Press and hold (10 seconds) both the Volume up and Volume down buttons until your hear “Pair mode” and the LED flashes alternating red and blue.
- Your headset has now been reset. The headset it will automatically enter pairing mode after successfully resetting. If you do not wish to pair the headset with a device, you can turn it off.
Note : After resetting, you need to re-pair the headset with your smartphone. Remember to delete the previous pairing before you re-pair.
Applicable products
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>