CZK-5628 Tire Inflator Portable Air Compressor User Manual
- June 16, 2024
- CZK
Table of Contents
CZK-5628 Tire Inflator Portable Air Compressor
Product Information
Specifications
- Product version: Cordless CZK-5628
- Voltage: 7.4 V
- Power: 50W
Layout
- Air hose
- Digital display
- Operation buttons
- Air hose port
- LED light
- Type-C input
- USB Output
- Air hose storage port
Operation Guide
Please charge it fully before use.
- Connect the air hose to the tire inflator.
- Connect the other end of the air hose to the valve of the tire.
- Press and hold the power button to wake up the tire inflator.
- Select one of the four modes:
- For Sedan Car Tire
- For Motorcycle
- For Bicycle
- For Balls
- Custom mode (preset tire pressure)
- To set the desired tire pressure:
- Press and hold the unit switch button to switch between units (e.g., PSI, BAR, KPA).
- Use the plus (+) or minus (-) button to adjust the numerical value.
- Wait a few seconds for the numbers to stop flashing.
- Turn on the inflation switch to start the process.
- The tire inflator will automatically stop inflating when it reaches the specified air pressure.
- Press and hold the unit switch button to switch between five modes.
- Press the power button to start the tire inflator.
- The tire inflator will stop automatically once the tire pressure reaches the preset value.
FAQ
Q: How do I charge the tire inflator?
A: To charge the tire inflator, use the provided Type-C cord and connect it
to the Type-C input port on the device. Plug the other end into a power
source.
Q: How do I use the LED light?
A: Press the LED light button to turn on/off the LED light. It can be used
as a flashlight in low-light conditions.
Q: How do I check the current tire pressure?
A: The digital display will show the current tire pressure when the tire
inflator is in use. The numerical value will be displayed along with the
selected unit (e.g., PSI, BAR, KPA).
Q: How do I know when the battery is low?
A: The battery indicator on the digital display will show the remaining
battery level. When it is low, consider charging the tire inflator.
Q: Can I use the tire inflator to inflate other objects besides tires?
A: Yes, you can use it to inflate balls or other inflatable objects. Select
the appropriate mode for the specific object.
WARNING
Children must not operate the Tire Inflator alone. Never use the Tire
Inflator in direct sunlight, high temperatures, or high-pressure environments.
Keep the Tire Inflator away from water and rain; it is not suitable for use in
water. To avoid damage, excess heat, toxic fumes, fire, or explosion, turn off
and allow the Tire Inflator to cool for 30 minutes after 10 minutes of use.
Always turn off the power switch after use. Before using this product,
carefully read all warnings and instructions. Improper use can result in
product damage beyond the Seller’s responsibility.
ATTENTION
To minimize the risk of electric shock, refrain from exposing your Tire
Inflator to rain. It is recommended to store it indoors and away from any
sources of fire.
- This product may experience slight heating during normal operation, which is deemed a typical occurrence.
- To prolong the air pump’s lifespan, we do not recommend continuous inflation for more than 10 minutes. Should prolonged use be necessary, intermittent breaks are advised to allow for the cooling down of your tire inflator.
PRODUCT PARAMETER
LAYOUT
OPERATION GUIDE
Four modes
Preset tire pressure
Press and hold ” ” to switch the unit. Use the “+” or “-” button to adjust the numerical value, and wait a few seconds after setting for the numbers to stop flashing. Then turn on the inflation switch to start the process. The tire inflator will automatically stop inflating when it reaches the specified air pressure.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>