Kramer Electronics K-SPEAK Bluetooth Speakerphone User Guide

: June 6, 2024
: Kramer Electronics

Kramer Electronics K-SPEAK Bluetooth Speakerphone User Guide

K-SPEAK Bluetooth Speakerphone

SAFETY WARNING

Disconnect the unit from the power supply before opening and servicing
For the latest information on our products and a list of Kramer distributors, visit our
Web site where updates to these installation instructions may be found.
We welcome your questions, comments, and feedback.
www.kramerAV.com
[email protected]

K-SPEAK Bluetooth Speakerphone

Congratulations on purchasing your Kramer K-SPEAK high performance Bluetooth Speakerphone. K-SPEAK supports a 360° omni-direction audio pickup in a radius of up to 5 meters (when unobstructed) and enables the user to connect to up to 2 devices via Bluetooth, AUX (using the K-SPEAK Cascade cable, purchased separately) or USB. K-SPEAK also features auto echo cancellation, auto noise suppression and auto audio gain and can be charged (via USB or a wireless charger, for example, using the Kramer TBUS-1-KWC or KWC-1 charging spots) to perform for up to 8 hours at a time (depending on battery consumption and the environment).

Get to know your K-SPEAK

Mounting K-SPEAK

To mount the K-SPEAK, simply place it on a tabletop. Lh

Ensure that the environment (e.g., maximum ambient temperature, humidity & air flow) is compatible for the device.
Avoid exposing the product to direct sunlight or any other heat source.
Keep away from children – product includes small accessories and components.
Avoid uneven mechanical loading.
Do not insert any sharp objects into the product.
Avoid dropping or hitting the product to avoid damaging the product.
For maintenance, call tech support.

Getting to know your K-SPEAK

For best results we recommend that you use Kramer cables included in the package.

Connecting K-SPEAK

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

There are no operator serviceable parts inside the unit.

Warning:

Laptop

Do not open THE unit. High voltages can cause electrical shock! Servicing by qualified personnel only.

Using Bluetooth

When using Bluetooth, enable Bluetooth on your mobile phone or any other device and connect to K-SPEAK. The
Bluetooth device name is located on the K-SPEAK rear side.
If required (for example when using a PC), you can connect the USB Bluetooth adapter to a device (within a 3 meter distance) to make sure you get a stable Bluetooth connection.
To do so, connect the USB Bluetooth adapter to the computer (preferably on the side facing the speaker, for better connection). K-SPEAK connects automatically.

Note that sometimes you need to reconnect to Bluetooth after connecting the adapter. To do so,
press the Bluetooth key for 9 seconds and a connection will be established within 30 seconds.

Troubleshooting

Technical Specifications

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Non-modification Statement:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.