FISHER PAYKEL ADDD24STPX Accessory Door Panels Installation Guide

June 16, 2024
Fisher & Paykel

FISHER PAYKEL logo INSTALLATION GUIDE
Accessory door panelsFISHER PAYKEL ADDD24STPX Accessory Door
Panels

SAFETY & WARNINGS

WARNING!
Electric Shock Hazard
Failure to follow this advice may result in electrical shock or death.
Read and follow the safety and warnings before operating this appliance.
WARNING!
Cut Hazard
Failure to use caution could result in injury.
Take care: some edges may be sharp.

  • Ensure a 2mm minimum ventilation gap below the door is maintained.
  • Ensure all packaging is removed and disposed of responsibly.
  • Ensure the Knock-To-Pause module is oriented correctly before attaching.

COMPONENTS REQUIRED

FISHER PAYKEL ADDD24STPX Accessory Door Panels - COMPONENTS
REQUIREDDouble models
Repeat each step on both drawers.
Ensure a 8mm minimum ventilation gap below the door is maintained.
For more information, visit www.fisherpaykel.com

DOOR PANEL INSTALLATION

Remove both side pins with pliers and carefully pull the panel bracket down and out slightly.
FISHER PAYKEL ADDD24STPX Accessory Door Panels - assembly
1Unplug knock-to-pause module from the controller and remove the earth wire from the bracket.
FISHER PAYKEL ADDD24STPX Accessory Door Panels - assembly
2Remove the Knock-to-Pause module from the back of the bracket.
FISHER PAYKEL ADDD24STPX Accessory Door Panels - assembly
3Install the handle to the panel following the installation guidance available for your handle kit.
FISHER PAYKEL ADDD24STPX Accessory Door Panels - assembly
4Attach the Knock-to-Pause module to the panel as shown. Ensure the module is correctly oriented and is not in contact with the brackets before securing.FISHER PAYKEL ADDD24STPX Accessory Door
Panels - assembly 5Reconnect the Knock-to- Pause module to the UI 1 slot on the wash controller as shown.
FISHER PAYKEL ADDD24STPX Accessory Door Panels - assembly
6Reconnect the Earth wire to the panel bracket. Warning: Failure to reconnect the Earth wire may result in electrical shock or death.
FISHER PAYKEL ADDD24STPX Accessory Door Panels - assembly
7Carefully fit the panels onto the product. Re-insert both side pins to secure panels in place.
FISHER PAYKEL ADDD24STPX Accessory Door Panels - assembly
8Insert a crosshead driver into the hole above each side pin and rotate to adjust the panel alignment. There is a maximum travel distance of ± 1/16”(2mm).
FISHER PAYKEL ADDD24STPX Accessory Door Panels - assembly
9Repeat for both sides if required.

FISHER PAYKEL logo 431158A 10.22 US CA

Documents / Resources

| FISHER PAYKEL ADDD24STPX Accessory Door Panels [pdf] Installation Guide
ADDD24STPX Accessory Door Panels, ADDD24STPX, Accessory Door Panels, Door Panels, Panels
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Fisher & Paykel User Manuals

Related Manuals