IKEA 805.159.10 VINDRIKTNING Air Quality Sensor User Manual
- June 16, 2024
- Ikea
Table of Contents
IKEA 805.159.10 VINDRIKTNING Air Quality Sensor
Product Information
This product is a VINDRIKTNING air purifier manufactured by IKEA of Sweden AB.
It is designed for indoor use only. The air purifier features LED indicators
that display the air quality based on PM2.5 levels. The green indicator
represents good air quality (0-35), the amber indicator represents okay air
quality (36-85), and the red indicator represents poor air quality (86 and
above). The LED indicators will pulsate during start-up mode and when the
device is not in use.
The product should be cleaned regularly using a soft cloth moistened with mild
detergent. Abrasive cleaners or chemical solvents should never be used as they
can damage the product.
It is important to note that the product should not be opened or repaired by
the user, as it may expose them to dangerous voltage points or other risks.
For proper disposal, the product should be separated from household waste and
handed in for recycling by local environmental regulations. This helps reduce
waste volume and minimize negative impacts on human health and the
environment.
Product Usage Instructions
-
Step 1: Placement
Choose a suitable location for the air purifier. It should be placed indoors and at least 10cm (4 inches) away from any obstruction. -
Step 2: Power Connection
Connect the air purifier to a power source using the provided USB cable. Make sure the cable is not stretched beyond its maximum length. -
Step 3: Operation
Once the air purifier is connected to power, it will start operating automatically. The LED indicators will display the current air quality status based on PM 2.5 levels. -
Step 4: Cleaning
Regularly clean the air purifier by wiping it with a soft cloth moistened with mild detergent. Use another soft, dry cloth to wipe it dry. Avoid using abrasive cleaners or chemical solvents as they can damage the product. -
Step 5: Maintenance
Do not attempt to repair the air purifier yourself. Opening or removing covers may expose you to dangerous voltage points or other risks. If you encounter any issues with the product, contact the manufacturer or authorized service center for assistance. -
Step 6: Disposal
When disposing of the air purifier, follow local environmental regulations for waste disposal. Separate the product from household waste and hand it in for recycling to minimize negative impacts on the environment and human health.
Specifications
- Manufacturer: IKEA of Sweden AB
- Indoor use only
Frequently Asked Questions
-
Q: Can I use this air purifier outdoors?
A: No, this air purifier is designed for indoor use only. -
Q: How do I know the current air quality?
A: The LED indicators on the air purifier display the air quality based on PM 2.5 levels. Green indicates good air quality, amber indicates okay air quality, and red indicates poor air quality. -
Q: Can I use abrasive cleaners to clean the product?
A: No, abrasive cleaners should not be used as they can damage the product. Use a soft cloth moistened with mild detergent for cleaning.
Air quality sensor features
- USB-C power adapter (5.0V, 2.0A) not included.
- Measure PM 2.5 particles
- LED status indicator
Instructions for use
- Connect the power adaptor to the USB-C port.
- The Air quality sensor initiates a start-up sequence for about 10 seconds.
- When the LEDs stop pulsing, the device is ready.
WARNING
LED indicators for air quality (PM 2.5):
- Green: 0-35 /Good + Low
- Amber: 36-85/OK + Medium
- Red: 86- /Not good + High
- Pulsing: Start-up mode
Good to know
- Operation temperature: 0°C to 40°C.
- Operating humidity: 0 to 95% RH (Recommended working humidity: 40-60% RH)
- Unplug the product from the power source before cleaning and when it is not in use.
Save these instructions for future use.
Important!
- Do not block the air intakes.
- Do not leave the device in direct sunlight or near any heat source, as it may overheat.
- The wall socket must be located near the equipment and must be easily accessible.
- Do not subject the unit to wet, moist or excessively dusty environments since this can cause damage to the unit.
- Children should be supervised to ensure they do not play with the product.
- Be sure to not exceed the maximum USB cable length recommended for the device.
Care instructions
- Wipe with a soft cloth moistened with a little mild detergent.
- Use another soft, dry cloth to wipe dry.
Note!
Never use abrasive cleaners or chemical solvents as this can damage the
product.
Product servicing
Do not attempt to repair this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks.
Technical data
- Type: E2014 VINDRIKTNING
- Input: 5.0V DC, 2.0A, 0.5 W, USB-C
- Particle detection range: 0~1000 μg/m3
- Max USB cable length: 3.0 m/9’8”
- Indoor use only
- Manufacturer: IKEA of Sweden AB
- Address : Box 702, SE-343 81 Älmhult, SWEDEN
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.