Yale Smart Latch 2 Touch Key Free with Wi-Fi Installation Guide
- June 16, 2024
- Yale
Table of Contents
Smart Latch 2 Touch Key Free with Wi-Fi
Specifications:
– Product: Yale Smart Latch 2
– Hole Size: 20mm
– Manufacturer: ASSA ABLOY
– Model: ISL-1123
Product Usage Instructions:
Before getting started
Are you installing the Yale Smart Latch with a new
Nightlatch?
Yes , I have bought the Yale Smart Latch with a
new Nightlatch to install them onto my door.
Please start from the installation step below.
No , I am going to keep using the existing
Nightlatch on my door with the Yale Smart Latch. There are many
types of Nightlatches, so please start from the installation step
below, and follow the check points for correct installation.
Check Point
Please use the key of your existing Nightlatch and check the
below:
-
Can you open with your key in both directions? Please go to
step 900. -
Can you open with your key only in the left direction? Not in
the right direction? Your Nightlatch needs an additional plate.
Please go to step (L). -
Can you open with your key only in the right direction? Not in
the left direction? Your Nightlatch needs an additional plate.
Please go to step (R).
Step (L): Additional Plate for Left Direction
Please attach the additional handing plate tightly onto the
cylinder fixing surface. The plate must be aligned with the shape.
Make sure the ‘LEFT TURN’ is shown as the image below if your latch
is opened only to the LEFT direction by the key.
Step (R): Additional Plate for Right Direction
Please attach the additional handing plate tightly onto the
cylinder fixing surface. The plate must be aligned with the shape.
Make sure the ‘RIGHT TURN’ is shown as the image below if your
latch is opened only to the RIGHT direction by the key.
Please read the instructions before fitting and using the Yale
Smart Latch 2.
The functions and design of this product can be changed without
prior notice for performance and quality improvements.
The smarter way to protect your home.
Disassemble Lockset
Please disassemble your existing Nightlatch case and mounting
plate. *The Nightlatch and plates above are generic images. If you
are retrofitting the Yale Smart Latch, your existing Nightlatch may
be different.
Door Preparation
At the height you want your lock, use a pencil to mark a spot
exactly 60mm from the edge of the door. At that spot, drill a 32mm
diameter hole through the door. Or if using an existing cylinder
hole, use the template to mark the position for the 20mm hole.
Cut Connecting Bar
Use template provided:
– Mark and cut connecting bar.
– Cut with pliers to ensure a clean cut.
Place the Electronic Keypad into the holes on the outside of the
door. Now measure and cut the connecting bar to the required
length.
Warning: The projection of the connecting bar
is important to ensure the lock works correctly, and may differ
depending on the Nightlatch. If this is cut too short, it cannot be
replaced.
Mount External Keypad and Mounting Plate
Use the template provided to choose the correct screw length
according to your door thickness.
FAQ:
Q: Can I use a cordless screwdriver to install the Yale Smart
Latch 2?
A: Yes, you can use a cordless screwdriver. However, please
ensure it is set to low speed and torque to avoid cross threading
fixing screws.
Q: Where can I find more information about the Yale Smart Latch
2?
A: For more information, please visit yalehome.com/nz
20mm Hole
Smart Latch 2
Installation Guide
Contents Include
Fit the Yale Smart Latch 2 using hand Phillips screwdriver to avoid cross
threading fixing screws. If using a cordless, please ensure it is set to low
speed & torque.
Front Body
Battery Pack
Handing Plate
Screws Batteries Self adhesive pad
For more info, visit: yalehome.com/nz
Part of ASSA ABLOY
ISL-1123
Before getting started
Are you installing the Yale Smart Latch with a new Nightlatch?
Yes, I have bought the Yale Smart Latch with a new Nightlatch to install them onto my door.
Please start from installation step
ON THE RIGHT PAGE
NO, I am going to keep using the existing Nightlatch on my door with the with the Yale Smart Latch. There are many types of Nightlatches, so please start from installation step BELOW, and follow the check points for correct installation.
Check Point
Please use the key of your existing Nightlatch and check the below
Keep your door open Insert the key in the outside cylinder key hole Turn the
key 90° counter clockwise (to the left)
and check the latch fully retracts
Turn the key 90°clockwise (to the right) and check the latch fully retracts
900
Can you open with your key in both directions? Please go to step
900 KEY
Can you open with your key only in the left direction? Not in the right direction?
Your Nightlatch needs an additional plate
PLEASE GO TO STEP
(L)
Can you open with your key only in the right direction? Not in the left direction?
Your Nightlatch needs an additional plate
PLEASE GO TO STEP
(R)
Please attach the additional handing plate tightly onto the cylinder fixing surface. The plate must be aligned with the shape. Make sure the ‘LEFT TURN’ is shown as the image below if your latch is opened only to the LEFT direction by the key.
Please attach the additional handing plate tightly onto the cylinder fixing surface. The plate must be aligned with the shape. Make sure the ‘RIGHT TURN’ is shown as the image below if your latch is opened only to the RIGHT direction by the key.
Self adhesive pad
Self adhesive pad
Please read the intructions before fitting and using the Yale Smart Latch 2.
The functions and design of this product can be changed without prior notice
for performance and quality improvements.
The smarter way to protect your home.
Disassemble Lockset
Please disassemble your existing Nightlatch case and mounting plate.
*The Nightlatch and plates above are generic images. If you are retrofitting the Yale Smart Latch, your existing Nightlatch may be different.
Door Preparation
At the height you want your lock, use a pencil to mark a spot exactly 60mm
from the edge of the door. At that spot, drill a 32mm diameter hole through
the door. Or if using an existing cylinder hole, use the template to mark the
position for the 20mm hole.
Cut Connecting Bar
Use template provided
72.5mm 60mm
20mm Hole 32mm Hole
Inside
Outside
Mark and cut connecting bar. Cut with pliers to ensure a clean cut.
Place the Electronic Keypad into the holes on the outside of the door. Now
measure and cut the connecting bar to the required length.
Warning: The projection of the connecting bar is important to ensure the lock
works correctly, and may differ depending on the Nightlatch. If this is cut
too short, it cannot be replaced.
Mount External Keypad and Mounting Plate
Use the template provided to choose correct screw length according to your door thickness.
Make sure the front keypad is aligned before fixing the screws tightly. Now fix the mounting plate onto the door. Don’t overtighten the screws, as this may cause the lock to bind and not function smoothly.
Nightlatch Installation
Finish the installation of your nightlatch using the mounting instructions.
Door Template
ø20mm
Door Thickness
Secure Battery Pack
Connect the cable to the battery pack.
Fit first
Note: For a new Nightlatch, please refer to separate latch mounting
instructions for specific retaining screw hole pattern.
Feed the cable through the slot and then, being careful not to overlap it,
zig-zag any excess cable behind the battery pack.
ø32mm
Insert Batteries and Close the Cover
Make sure battery back is square with the door.
Screw into boss.
Fix screw to completely secure battery pack.
*Nightlatch shown is for illustration only and may not be available.
Connecting with the Yale Home App
The Smart Latch 2 comes with the Yale Home App module to allow users to
connect your lock with the Yale Home App to achieve a smart locking solution.
Once you insert the module and batteries, the lock will be ready to pair with
the Yale Home App.
Inserting the Yale Home App Module
Step
Icon
Description
Remove inside cover
R
Press the two release buttons on the side of the
battery pack and remove cover
Remove a battery from the lock
Insert the module
Insert all batteries
R
Remove any of the batteries to cut power to the lock
The module has 8 pins that are plugged into the small black connector above
the batteries on the top left of the lock
Reinsert all batteries into the lock
NOTE: TO ENABLE MOBILE APP FUNCTIONALITY WE HIGHLY RECOMMEND TO CONNECT YOUR
LOCK WITH YALE HOME APP IMMEDIATELY AFTER SETTING UP THE MASTER CODE.
For security reason when the lock get registered with Yale Home App, the lock
enables `Home App mode’ and preventing the user to register the credentials
from keypad (such as: add / remove user code / key tag except the master
code). All existing credentials (user code / key tag) will be erased as
initialisation except the master code. It is HIGHLY RECOMMENDED to register
the credentials through Yale Home App only.’
Yale Home App
Download the Yale Home App from the Google Play Store or Apple App Store.
Scan the below QR code to view the Handy Hints and Tips.
Removing the Yale Home App module
Removing the Yale Home App module will remove all access to features available
in the Yale Home App. You may want to remove the Yale Home App module from the
lock if you would like to move it into another lock.
Step
Remove inside cover Remove a battery from the lock
Remove the module
Icon
R
Description
Press the two release buttons on the side of the battery pack and remove cover
R
Remove any of the batteries to cut power to the lock
The module is situated in the top left corner above the batteries. It can be unplugged by pulling it out
Check Points after Installation
Make sure to leave the door open when registering your PIN because you may
accidentally lock the door while trying to register or change your PIN code.
Touch the keypad with your palm to wake up the keypad. Enter a PIN code 123456
and enter * button or touch the keypad with
your palm to open the door. Turn the thumbturn several times to retract the
latchbolt. The thumbturn will not retract the latchbolt after few seconds.
PLEASE NOTE: Remember to change your master code after installation.
To avoid any possibility of being locked out, do not close the door until a PIN code has been successfully registered to allow access.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>