Woodpecker REV112023 1 inch Carbide Insert Spoilboard Bit User Manual
- June 16, 2024
- WOODPECKER
Table of Contents
Woodpecker REV112023 1 inch Carbide Insert Spoilboard Bit
Product Usage Instructions
Specifications
- Diameter: 1″
- Number of Flutes: 3
- Carbide Insert Type: Square
- Recommended Maximum Speed: 30,000rpm
Replacing Cutting Edges
To replace the cutting edges when they become dull, follow these steps:
- Using the supplied 1/16 hex wrench, loosen the hex screw that holds the carbide insert in place.
- Rotate the blades to expose a sharp edge.
- Place the blade against the seat with the edge in the groove.
- Re-tighten the hex screw to secure the blade in place.
Purchasing Replacement Carbide Inserts
To purchase replacement carbide inserts, you can visit Woodpeck.com and search for “Countersunk Square Carbide Insert .40 Square 3-Pack 20133IX3”. This pack contains three inserts.
FAQ
- Q: Where can I purchase replacement carbide inserts?
- A: You can purchase replacement carbide inserts at Woodpeck.com. Search for “Countersunk Square Carbide Insert .40 Square 3-Pack 20133IX3”.
- Q: What is the recommended maximum speed for this product?
- A: The recommended maximum speed is 30,000rpm.
- Q: How do I replace the cutting edges?
- A: To replace the cutting edges, follow these steps:
- Loosen the hex screw with the supplied 1/16 hex wrench.
- Rotate the blades to a sharp edge.
- Press the blade against the seat with the edge in the groove.
- Re-tighten the hex screw to secure the blade in place.
Recommended Maximum Speed: 30,000rpm
Overview
Introduction
- When fresh cutting edges are needed, loosen hex screw with supplied 1/16″ hex wrench.
- Rotate the blades to a sharp edge.
- Then press the blade against the seat with the edge of the blade in the groove and re-tighten.
- Countersunk Square Carbide Insert .40″ Square 3-Pack 20133IX3
- Available at Woodpeck.com
WARNING
- To reduce the risk of injury keep hands away from moving parts. Refer to your owners manual for proper setup and use.
- To reduce the risk of injury, wear safety goggles or glasses with side shields, ear protection a dust mask.
WARNING
- This product can expose you to chemicals, including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
- For more information go to: www.P65Warnings.ca.gov
More Information
- At Woodpeckers we are constantly reviewing & improving our tools. The most current version of our instruction manuals are always available to download at woodpeck.com. (Located in the bottom section of the tool’s page under the “Additional Information” or “Instructions” tabs.)
- Be the first to know all the new products, OneTIME Tools & sales by subscribing to our eClub. (Located at the top center of our webpage woodpeck.com.)
- Subscribe to our YouTube channel to stay up-to-date on all the latest tool tips & tricks.
- Interact with us! Follow us on Facebook, Instagram & TikTok!
- Enjoy shop tips, project ideas, tool techniques & more in our Woodworking Resource Center/Blog. (Located at the bottom center of our webpage woodpeck.com.)
Woodpeckers, LLC Strongsville, Ohio
woodpeck.com
© 2023 Woodpeckers, LLC
If you think you’re missing anything, email us at
mailroom@woodpeck.com.
You can also call us at 800-752-0725
from 9:00 a.m. to 4:00 p.m. EST Monday – Friday.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>